Williams AV Caption Assist Bedienungsanleitung

Caption Assist

CA C3

USER MANUAL

MAN 275A

Caption Assist

Table of Contents

Safety Warnings and Instructions .......................................................................................................................... 4

Maintenance and Recycling Instructions ............................................................................................................ 5

Overview .......................................................................................................................................................................6

Introduction ............................................................................................................................................................................ 6

Network Connection Required ..............................................................................................................................6

General Installation ....................................................................................................................................................6

The Back Panel....................................................................................................................................................................... 6

Connecting the Video Source and Outputs ................................................................................................................. 6

Connecting Devices ..............................................................................................................................................................7

Power On ................................................................................................................................................................................. 8

SoundPlus™ Media Player ........................................................................................................................................8

Downloading the Software................................................................................................................................................. 8

Installing the Video Software............................................................................................................................................. 8

Using the Video Software................................................................................................................................................... 8

Caption Assist Menu System ..................................................................................................................................9

Overview ..................................................................................................................................................................................9

Toolbar....................................................................................................................................................................................... 9

Main Menu ...............................................................................................................................................................................9

Menu Conventions...............................................................................................................................................................10

System Information .................................................................................................................................................. 10

System Info .............................................................................................................................................................................10

Scheduling Restarts ..............................................................................................................................................................11

Detecting and Assigning Devices.........................................................................................................................11

Setting COMM Port Parameters........................................................................................................................................11

Preparing Video Sources and Outputs ...............................................................................................................11

Setting Video Output............................................................................................................................................................11

EDID..........................................................................................................................................................................................12

Video Source Options.........................................................................................................................................................12

Default Video Source..........................................................................................................................................................13

Networking ..................................................................................................................................................................13

Network Setup.......................................................................................................................................................................13

Conﬁgure Windows Share (SMB) Settings ...................................................................................................................14

Remote Servers.....................................................................................................................................................................15

Caption Appearance and Settings.......................................................................................................................16

Speaker Settings...................................................................................................................................................................16

Language Settings ...............................................................................................................................................................16

Setting Caption Appearance ............................................................................................................................................ 17

Caption Assist

Devices Menu.............................................................................................................................................................18

Power Cycle ...........................................................................................................................................................................18

Selecting a USB Microphone............................................................................................................................................18

Updating the Caption Assist ..................................................................................................................................18

Captioning Sessions.................................................................................................................................................19

Purchasing Hours .................................................................................................................................................................19

Starting a Session.................................................................................................................................................................19

Stopping a Session ..............................................................................................................................................................19

Troubleshooting Guide........................................................................................................................................... 20

Telnet Commands......................................................................................................................................................21

Language Selection Table.....................................................................................................................................22

Outside copyright information for Software.....................................................................................................24

Speciﬁcations............................................................................................................................................................ 29

Regulatory Statements........................................................................................................................................... 29

United States - FCC ........................................................................................................................................................... 29

Canada IC.............................................................................................................................................................................. 29

Limited Warranty ...................................................................................................................................................... 30

Caption Assist

Safety Warnings and Instructions

WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

POWER CORD NOTICE FOR INTERNATIONAL OPERATION - Please call Williams AV Customer Service at 800.328.6190

to order the appropriate power cord for the country of use.

Important Safety Instructions:

1. Read these instructions

2. Keep these instructions

3. Heed all warnings

4. Follow all instructions

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or

the third prong is provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician

for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualiﬁed service personnel.

14. The apparatus shall not be exposed to liquids.

15. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the

manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force and

uneven surfaces may cause the appliance and cart combination to overturn.

16. Power Sources - The appliance should be connected to a power supply only of the type described in the

operating instructions or as marked on the appliance.

17. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the

enclosure through the openings.

18. Servicing - The user should not attempt to service the appliance beyond that described in the operating

instructions. All other servicing should be referred to qualiﬁed service personnel.

Caption Assist

Precautions:

1. Power – WARNING, BEFORE TURNING ON THE POWER FOR THE FIRST TIME, READ THE FOLLOWING SECTION

CAREFULLY. The unit is designed for use only with the line cord of the region in which it will be operated.

2. Voltage Label (Rear Panel) – A label located at the rear panel power connection indicates the power input for the

unit.

3. Do Not Plug in the HDMI input, output, Comm 1, Comm 2, Ethernet, or USB connections while the power switch is

switched to the ON position.

4. Do Not Touch any part of the Caption Assist with wet hands. Do not handle any part of system, including the

power cord, when your hands are wet or damp. If water or any other liquid enters the Caption Assist or Caption

Assist‘s location, take the device to qualiﬁed service personnel for inspection.

5. Place all components of the Caption Assist in a well ventilated location. Take special care to provide plenty of

ventilation on all sides of the system components, especially when it is placed in a small location, such as a rack.

If ventilation is blocked, the system may over heat and malfunction.

6. Do not expose the Caption Assist to direct sun light or heating units as the system’s internal components

temperature may rise and shorten the life of the components. Avoid damp and dusty places.

7. Care – From time to time you should wipe o the front and side panels and the cabinet with a soft cloth. Do not

use rough material, thinners, alcohol or other chemical solvents or cloths since this may damage the ﬁnish or

remove the panel graphics.

Maintenance and Recycling Instructions

Help Williams AV protect the environment. Please take the time to dispose of your equipment properly.

Product Recycling:

Please do NOT dispose of your equipment in the household trash. Take the equipment to a electronics

recycling center.

Servicing or attempting to service this device will void the warranty

Refer servicing to qualiﬁed personnel. Servicing is required when the system has been damaged in any way: if liquid

has been spilled or objects have fallen into the unit, if the unit has been exposed to moisture, if the unit does not

operate normally, or if the unit has been dropped.

Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produces heat.

Use only attachments/accessories speciﬁed by the manufacturer.

Unplug the transmitter during lightning storms or when unused for long periods of time.

Be advised that dierent operating voltages require the use of dierent types of line cord and attachment plugs.

Check the voltage in your area and use the correct type.

Use only the power supply provided by Williams AV. Other power supplies may have similar speciﬁcations, but

may not be equivalent in emissions ratings, in-rush current, etc. Use of an unapproved power supply may leave the

device partially or completely inoperable, and will void the warranty.

This apparatus has been designed with class-1 construction and must be connected to a main socket outlet with a

protective ground connection (the third grounding prong).

Protect the power cord from being walked on or pinched, particularly at plugs, receptacles, and near the power jack

on the transmitter.

The MAINS plug or an appliance coupler is used as the disconnect device, so the disconnect device should remain

readily operable.

Caption Assist

Overview

Introduction

The Caption Assist (CA C3) is a professional, hardware-based live captioning system. During a video call or other

live event, the Caption Assist can use the power of the Google Cloud to put real time captions on any video source.

Many languages and dialects can be selected for captioning, and is a perfect ﬁt for churches, classrooms and other

presentations.

Network Connection Required

A network connection to the Caption Assist is required. The Caption Assist depends on access to the Google Cloud

to receive its captioning data.

General Installation

The Back Panel

Most wired devices will connect via one of the ports on the back panel. There are numerous ports to connect to,

including USB, HDMI, COMM ports and a Phoenix-Style connector.

19VDC --- 4.7A

LAN

COMM 2

COMM 1

HDMI Out

USB 3.0

HDMI In

PWR SW

CA C3

USB 3.0

RoHS

Made in USA

--C +

Back Panel Diagram

Connecting the Video Source and Outputs

HDMI Connectors

To connect HDMI video:

HDMI Input into Caption Assist: Using HDMI video cable, connect the cable to the HDMI In port on the back panel

of the Caption Assist.

HDMI Output from Caption Assist: Using HDMI video cable, connect the cable to the HDMI Out port on the back of

the Caption Assist to HDMI In on a HDMI display.

Required Use of Multiple Devices

The output typically cannot be connected to the same device as the input. For example, laptops do not have an

HDMI In port, but do have an HDMI Out port.

Any data sent to the HDMI Output is also sent out via a digital stream, which is viewable from the SoundPlus Media

Player.

Displaying the stream or output into the same device as the input will cause video to show a video of itself, creating

a visual echo.

Caption Assist

A visual echo loop is a repeating, nested video feed.

This is not desired as the video will repeat itself within itself, like ﬁlming yourself in a mirror. Audio echo may also be

introduced, depending on the conﬁguration.

Connecting Devices

IMPORTANT: Be sure to power down the Caption Assist before connecting or disconnecting any controllers. The

Caption Assist will automatically detect installed controllers upon turning the power on. If you change controllers or

add a new controller, you need to turn power o, install the new controller(s), then turn the power on.

Connecting the Keyboard, Tablet or other USB Devices

Connect the device(s) to any USB port on the Caption Assist. The system supports up to 5 USB 3.0 devices and 1

USB B device.

Connecting the Phoenix Connector

Connect the wires from your power controller (or other device) to the Caption Assist’s Phoenix-style connector

(labeled on the back of the device as PWR SW). When the relay is thrown, the Caption Assist will power on or o, as

a toggle.

Connecting a 3rd Party Controller - COMM Port Wiring Issues

Customers sometimes encounter issues with the wiring of controllers. The following information may be helpful in

resolving any issues.

• Caption Assist’s COMM ports sometimes use pin 9 to supply power to the RS-232 line drivers. Pin 9 was

selected because it’s speciﬁcation is seldom used. If you are connecting a device other than a line driver to a

COMM port, the voltage may cause unexpected issues with the device.

• COMM 2 is set up as the default control port.

• COMM 1 and COMM 2 have jumpers for power on pin 9, and are set to OFF when shipped from the factory. If

you require power from either or both of these COMM ports, please contact technical support.

Connecting USB Devices

A USB Mouse or Keyboard, Video Device, or other USB devices can be connected via the USB ports on the back

panel.

Connecting Analog Audio Input

Analog audio input cannot be directly connected to the Caption Assist. However, an XLR to USB cable is included

with the device to help convert the analog input connections to USB. You may be able to use other similar cables if a

XLR connection does not work for your audio setup.

Caption Assist

Power On

To power on the Caption Assist:

1. Plug the power cord into the back of the Caption Assist and then into any grounded outlet.

2. Plug the power cords from any video source(s), controller(s), and display(s) into any grounded outlet.

3. Turn on each of the connected units, and then press the power button on the front panel of the Caption Assist.

NOTE: In order for the Caption Assist to properly sync with the video signals, the sources should be turned on ﬁrst.

After a moment, a Caption Assist splash screen will appear, followed by the initializing of the ports, and ending with a

After the startup process, the default input source will be shown.

If this process is dierent for you, recheck your installation and power on again. Call Williams AV for support if it is

still unsuccessful.

NOTE: To bypass port initialization, press ESC during startup.

SoundPlus™ Media Player

The Caption Assist can display streaming video output over the SoundPlus Media Player. The video will match any

HDMI video output. The player will let you select from any stream sent from a Caption Assist system.

Downloading the Software

Download the software from www.williamsav.com. The ﬁrmware can be found on the product page, or under the

Support - Downloads section.

The media player screen

Installing the Video Software

After downloading the software, unzip the ﬁle that you’ve downloaded and run the installer. Follow the installer’s

prompts and instructions until the installation is complete.

Using the Video Software

Once installed, open the web conference software of your choice. While the web conference software is running,

also open the SoundPlus Media Player.

During your web conference, share the SoundPlus Media Player like you would a document or your screen. For

instructions on sharing your screen, please view your web conference software’s documentation.

Caption Assist

Caption Assist Menu System

Overview

There are two Caption Assist menus. One is a series of icons that runs along the bottom of the screen with

commands a presenter would use frequently, such as starting a session.

The other menu is a larger, main menu system mostly used for setup and conﬁguration. This menu will need to be

accessed to get your device connected to the network or calibrated properly.

Toolbar

A toolbar is available in the SoundPlus Media Player. The hamburger icon can toggle whether this menu is showing

or not. Switching the video source between HDMI or USB, the information screen, and the start or stop button are

available for quick access as well.

The Toolbar

Main Menu

The Main menu can be accessed by using a mouse connected to the USB ports on the Caption Assist to click the

top center of the output display. No physical button is visible. Pressing the Print Screen button on a USB keyboard

connected to the Caption Assist will also open the menu.

Click or use the arrow keys to navigate the menu system.

Main Menu

Caption Assist

Menu Conventions

Once the menu system is displayed, you can make selections from it to navigate to the option(s) you wish to change.

Each menu selection has the appearance of a rounded-corner button.

Not Selected: If a button is not selected, it has a black background.

Selected: When a button is selected, it changes to a blue background.

Hovering: As you move the selection arrow over a button (hovering), it will either

• Display blue behind the button text.

• Turn the text in the menu to white.

Submenus: A selection from the Main Menu causes a submenu to appear alongside it. A selection from the

submenu sometimes displays a second submenu of choices based on the selection you make.

Outline Format: The entire menu system is an outline format that allows you to drill down to the speciﬁc option you

wish to change. Whenever the Main Menu is visible, you can select directly from it to activate a dierent branch of

submenus.

Exiting Menus

Exit a submenu by selecting any option in the Main Menu. Exit the menu system by selecting Exit.

System Information

Certain menu items are used to view and update information about your Caption Assist.

System Info

This selection presents a readout of relevant information concerning your unit. This information can be useful in

troubleshooting, especially if you are contacting technical support.

1. Activate the menu system. The Main Menu appears.

2. Select Display. The Display menu appears.

3. Select System Info. A list of system information will be displayed.

NOTE: Your numbers will be dierent than those of the menu above. Please write down all numbers when contacting

technical support.

Andere Handbücher für Caption Assist

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Williams AV Elektronisches Wörterbuch Handbücher

Williams AV

Williams AV Caption Assist Bedienungsanleitung

Beliebte Elektronisches Wörterbuch Handbücher anderer Marken

Ectaco

Ectaco SAT-1600 Bedienungsanleitung

Sharp

Sharp PW-E310 Bedienungsanleitung

Franklin

Franklin BookMan III HBD-1450 Bedienungsanleitung

Eaton

Eaton DNP MINT Kurzanleitung

Franklin

Franklin IC-142 Bedienungsanleitung

Franklin

Franklin SCD-1890 Bedienungsanleitung

Franklin

Franklin SpellingAce SA-98 Bedienungsanleitung

Ectaco

Ectaco Language Teacher ECz600T Bedienungsanleitung

Franklin

Franklin BOOKMAN DMQ-440 Bedienungsanleitung

Besta

Besta cd 739p Gebrauchsanweisung

LEGRAND

LEGRAND tynetec ZXT360 Bedienungsanleitung

HORITA

HORITA RLT-50 Bedienungsanleitung

Language Teacher

Language Teacher ES400T Bedienungsanleitung

Accent

Accent 800 Bedienungsanleitung

SUPREME

SUPREME BTLT200 Bedienungsanleitung

Franklin

Franklin SCD-1870 Bedienungsanleitung

KMC Controls

KMC Controls KMD-5551E Benutzerhandbuch

Ectaco

Ectaco SpeechGuard TL-4 Bedienungsanleitung