Williams-Sonoma TG46P4368L01 Bedienungsanleitung

MADE IN CHINA

ASSEMBLY INSTRUCTIONS

MADE IN CHINA

ASSEMBLY INSTRUCTIONS

Thank you for purchasing your Christmas tree.The instructions below will help you quickly and easily set up

your new tree.

1. Find a level surface near an electrical outlet and assemble the tree stand as shown in Fig. A.

2. Each tree section is numbered with a tag. Identify all sections before assembling.

3. Assemble the tree from the bottom to the top. Insert the pole of Section 1 into the assembled stand.

Make sure the pole is firmly inserted and secured into the stand.

Note: Do not step on the tree legs during the setup.This may deform the tree stand and may result in an

unbalanced tree.

4. Follow the direction of the arrow marked on the adapter to insert. Ensure that all poles are firmly secure.

Continue this step until the entire tree is set up. Be sure that all wires are free of branch hinges.

5. Plug the adapter into the wall outlet (See Fig. B).Your tree should now be lit. If some bulbs do not light or

flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connect the plugs or replace the bad

bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.

6. Begin to shape the branches and tips in the bottom section inserted into the tree stand. Start with the tips

closest to the middle of the tree; pull the individual tips alternately upward and outward working your way

to the tip of the branches (See Fig. C).Work row by row to the upper part of the tree section leaving no tip

untouched. Continue to shape each branch as described above as you set up each tree section.

Top view

Side view

Fig. C

For pre-lit trees, if the tree does not illuminate:

1. Check to make sure that all plugs and adapter are properly connected as indicated in Fig. B.

(If the tree comes with a foot pedal, try stepping on the on/off button).

2. Turn the poles gently to make sure pole-to-pole connection is secured.

3. Check for loose, broken or missing bulbs, and replace as needed.

TROUBLESHOOTING TIPS

This tree includes spare hinge pins, washers and bulbs.

SPARE PARTS

Fig. D

Loose Branches

1. Extra hinge pins are included for repairing the hinges of

the branches. Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure using

the retainer washer. (See Fig. D)

STORAGE INSTRUCTIONS

1. Unplug cord from the wall outlet first and then remove all ornaments and decorations.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove

from section below and fold all branches toward the pole.

3. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward

the pole until the bottom section is removed from the tree stand.

4. Carefully place all tree sections into shipping box and tape it shut.

5. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to

excessive heat or humidity may damage your tree.

CAUTION

To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights

and may cause fire, or electrical shock hazards.

b) Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.

c) Do not mount or support strings in a manner that can cut or damage wire insulation.

*Electrical Rating For The Tree

(For Indoor Use Only)

Input: AC 120V, 60Hz, 0.16A

Output: DC 28V, 0.28A

Fig. B - Tree and Lights Assembly

Align both arrows

in a straight line

before sliding

down to insert

Do Not Tamper

Internal Parts

LIGHT ASSEMBLY DIAGRAM

7.84 Watts

ITEM #: TG46P4368L01

Adapter

To Be Plugged

Into Wall

Outlet

Fig. A - Tree Stand Assembly 1. Pull apart the legs of the stand so

that they are x-shaped.

2.When inserting the bottom section

of the tree into the assembled stand,

thread the eyebolt into the stand

and tighten until the pole is firmly

secured.

Eye Bolt