Williams Encore Bedienungsanleitung
Assemble the Stand Legs
1. Align the circular holes on bracket with the left and right stand legs.
2. Insert the 4X12 screws into the holes and fasten.
Assembly
Check the Package Contents
1 2
3
4
65 7 8 9 10 11
1. LEFT STAND LEG 1
2. RIGHT STAND LEG 1
3. CROSS BOARD 1
4. FOOT 2
5. BRACKET 4
6. CROSS BOARD BRACKET 2
7. INSERT WITH THREADED HOLE 4
8. 4X12 SCREW 20
9. M6X70 SCREW 4
10. M6X30 SCREW 4
11. SCREW KNOB 4
ITEM QUANTITY
3. Place the threaded insert into the hole on the stand leg. Rotate the threaded insert using a screw driver
to align the screw holes with the hole in the foot bottom.
4. Insert the M6X70 screws to the holes in the foot and align with the threaded holes of the insert in the side
board and fasten.
Tools required: phillips screwdriver
Attaching the Piano to the Stand
Place the piano on the stand. Align the circular
holes on the side board brackets with the holes
on the body. Insert the screw knobs into the
holes and fasten.
NOTE: Do not tighten the screw knobs until
all screw knobs have been inserted.
Assemble the Cross Board
5. Place the cross board brackets on the cross board and fasten with 4X12 screws.
Assemble the Piano Stand
6. Align the circular holes on the end of the cross board assembly with the right and left stand leg assembly.
7. Insert the M6X30 screws into the holes and fasten.
Inhaltsverzeichnis
Andere Williams Elektronische Tastatur Handbücher
Beliebte Elektronische Tastatur Handbücher anderer Marken
Yamaha
Yamaha Portatone PSR-100 Bedienungsanleitung
Casio
Casio WK-1600 Bedienungsanleitung
Keith McMillen Instruments
Keith McMillen Instruments K-Board Pro 4 Technisches Datenblatt
Yamaha
Yamaha PortaSound PCS-30 Bedienungsanleitung
Roland
Roland Juno-6 Bedienungsanleitung
McGrey
McGrey 6170 Bedienungsanleitung
