WILLTEK 4100 Bedienungsanleitung

Series

Willtek 4100

Mobile Phone Tester

GSM 900 nE-GSM nGSM 1800 (PCN) nGSM 1900 (PCS)

Dual band GSM 900+1800 nGSM 900+1900

Multiband GSM 900+1800+1900

User Guide

Manual Version: 0312-341-A

Designations such as utility names, company names and trade names are not

specially indicated in this manual, as they are all widely known. Such names

may, however, be the property of companies or other such bodies.

This manual is subject to change at any time without notice. Errors and omis-

sions excepted.

this manual may be reproduced or transmitted in any form or by any means

(printing, photocopying or any other method) without the express written per-

mission of Willtek.

Manual layout and text: Redaktion Interpreta, Munich, Germany

Willtek 4100

1-2

Willtek 4100

1-3

Contents

Chapter 1: GETTING STARTED

Preface ............................1-10

Operating modes ......................1-10

Important instructions ...................1-12

Proper operation ......................1-12

After unpacking .......................1-13

Key functions ........................1-14

Initial startup.........................1-16

Attaching the power supply unit ..............1-16

Start menu .........................1-16

Chapter 2: SETUP

Basic settings.........................2-2

Contrast ...........................2-2

Language ..........................2-3

Printer ............................2-4

Date and time ........................2-5

Header ............................2-6

PC interface .........................2-7

Choose the protocol .....................2-8

Sound ............................2-9

Self check..........................2-10

Accessing the menus ....................2-10

System information .....................2-10

Printer test .........................2-11

Keyboard test ........................2-12

Display test .........................2-12

Internal test .........................2-13

Preparing the tests .....................2-14

Installing the test SIM....................2-14

Background information: SIM................2-15

Attaching the test unit....................2-16

Connection via antenna ..................2-16

Points in favor .......................2-16

Points to note .......................2-16

Connection .........................2-17

Connection via the Universal Antenna Coupler ......2-18

Points to note ........................2-18

Connection .........................2-18

Cable-based connection ..................2-19

Points to note .......................2-19

Connection .........................2-19

Willtek 4100

1-4

Chapter 3: AUTOTEST

Overview ............................3-2

The influence of the user...................3-2

Running an AUTOTEST ...................3-3

A Standard AUTOTEST is carried out as follows ......3-4

Be prepared for input breaks.................3-4

When an AUTOTEST aborts.................3-4

The input breaks of a Standard AUTOTEST.........3-5

Lifting a tester block .....................3-6

Results of the AUTOTEST .................3-7

AUTOTEST PASSED ....................3-7

What to do if you are in doubt ................3-7

Softkey functions.......................3-7

AUTOTEST FAILED .....................3-8

Fault analysis ........................3-8

Sample AUTOTEST log (excerpt) .............3-10

Evaluating stored AUTOTESTs..............3-11

Selecting a stored log....................3-11

Softkey functions ......................3-12

Available capacity for storing AUTOTESTs ........3-12

Downloading logs to a PC .................3-12

Entering test parameters .................3-13

1. Assigning a name to a record ..............3-14

2. Selecting the radio system ................3-15

3. Selecting the connection type ..............3-15

4. Selecting the AUTOTEST ................3-16

At least one AUTOTEST ..................3-16

Background: AUTOTEST..................3-17

Standard AUTOTESTs ...................3-17

User-defined AUTOTESTs .................3-18

5. Channel selection ....................3-19

6. Entering compensation values ..............3-20

Background: signal attenuation...............3-20

Effect of the connection type ................3-21

Determining compensation values .............3-22

Cable-based connection ..................3-22

Universal Antenna Coupler .................3-22

Copying records ......................3-24

Chapter 4: FAULT FIND

Overview ............................4-2

The mode for experts ....................4-2

Accessing FAULT FIND mode ................4-3

Access with the Willtek 4107S ................4-3

Willtek 4100

1-5

FAULT FIND test preparation ...............4-4

Selecting the radio system .................4-4

Special considerations for dual-band systems........4-5

Special features of multiband systems............4-6

Testing multiband mobile phones ..............4-6

Selecting channels/RF power ................4-7

Entering channel numbers ..................4-7

Setting the RF power ....................4-8

Compensating for signal attenuation.............4-9

Compensation values ....................4-9

Installing the test SIM....................4-10

Connecting the mobile phone ...............4-10

This is what is tested ....................4-11

Test 1.0: Network identification and registration .....4-12

Problems with registration .................4-13

Problem solving.......................4-13

Test 2.0: MS CALL connection setup ..........4-14

Test 3.0: BS CALL connection setup ..........4-15

Test 4.0: Messages and measurements ........4-16

Test 4.1: Changing the voice channel ...........4-22

Test 4.2: Reducing the RF power (from the tester) ....4-23

Test 4.3: Changing power levels ..............4-24

Test 4.4: Clear down on the mobile phone ........4-25

Test 4.5: Clear down on the tester .............4-26

Test 5.0: Measuring the bit and frame error rate ......4-27

Test 6.0: Checking mobile phone identification .....4-29

Test 7.0: Speech testing ..................4-32

Test 8.0: Cell Broadcast test ...............4-34

Chapter 5: Additional Features

Introduction ..........................5-2

Additional features ......................5-2

Asynchronous Mode ....................5-3

Preparation and starting ...................5-4

Changing bands on multiband devices ..........5-5

Emission of a carrier signal .................5-5

Test results in Asynchronous Mode .............5-6

Remote Control........................5-8

Preparation..........................5-8

Starting remote mode ....................5-8

Special characters in SCPI .................5-9

SCPI syntax .........................5-9

Abbreviations ........................5-9

Command indicators .....................5-9

Willtek 4100

1-6

Composite commands ...................5-10

Parameters .........................5-10

Text .............................5-10

Numeric...........................5-10

Boolean ...........................5-11

Queries ...........................5-11

Result formats .......................5-11

Query ............................5-11

Settings and queries ....................5-12

Multiple measurement ...................5-12

Compatibility ........................5-12

SCPI command sets ....................5-13

Sample program ......................5-52

Quick reference .......................5-54

Chapter 6: APPENDIX

Technical data ........................6-2

Interfaces ...........................6-3

HD sub-26 socket ......................6-3

Mini-DIN socket .......................6-4

TNC socket .........................6-4

Printing.............................6-5

This is what you can print ..................6-5

Printer requirements .....................6-5

Connecting a printer .....................6-5

Testing the printer ......................6-6

Troubleshooting .......................6-6

Data transfer between the tester and the PC ......6-8

Where can I get the software? ................6-8

Installing the software ....................6-8

Preparation..........................6-9

The Program window ....................6-10

No data transfer? ......................6-11

Error messages.......................6-11

Performing a firmware update ...............6-12

Abortion during an update .................6-13

Copying MS TYPE records .................6-14

Exporting an MS TYPE list to PC..............6-14

Importing an MS TYPE list from the PC ..........6-15

Exporting test logs .....................6-16

Export options .......................6-16

Examples of exported test logs ...............6-20

Importing AUTOTESTs ...................6-21

Command line parameters .................6-23

General notes........................6-24

Willtek 4100

1-7

Upgrading your model ..................6-25

On-site upgrade or service centre?.............6-25

Updating the firmware ...................6-26

This is how to get your update package ..........6-26

To update you will need these ...............6-27

Contents of the update package ..............6-27

Performing the update ...................6-27

The code used in log listings ...............6-28

Troubleshooting ......................6-33

Willtek 4100 Timeline....................6-35

Accessories and options .................6-38

Standard accessories ...................6-38

Extra accessories .....................6-38

Options ...........................6-39

RF adapters ........................6-40

Overview GSM threshold values .............6-41

Willtek 4100

1-8

GETTING

STARTED

Willtek 4100

1-9

Preface

Thank you for choosing a model in the Willtek 4100

series. The equipment will give you valuable assistance

in functional testing and troubleshooting on GSM

mobile phones.

Model Frequency band Network

Willtek 4107

Willtek 4107L

Willtek 4107S

0,9/1,8/1,9 GHz

GSM 900/1800/1900 Single band

E-GSM Single band

GSM 900+1800 Dual band

GSM 900+1900 Dual band

GSM 900+1800+1900 Multiband

Willtek 4107S The Willtek 4107S offers a number of additional

features compared with the Willtek 4107 (see chapter 5

for details). The S version can be identified by the type

label and the model name in the start menu.

Willtek 4107L Special inexpensive model only available bundled with

other products (eg 4192 GSM Phone Checker

software). The same range of functions as the

Willtek 4107, except that FAULT FIND mode is not

available. This model can, however, be remotely

controlled (see chapter 5). Please contact our Sales

department for details.

nOperating modes

[AUTOTEST] Fast and accurate full testing of a mobile phone with an

overall assessment of PASSED (mobile phone OK) or

FAILED (mobile phone defective). Largely automatic

testing requiring no system expertise on the part of the

user.

[FAULT_FIND] Operating mode for error location on defective mobile

phones (not available for Willtek 4107L). Selective

performance of individual tests. Displays

measurements for assessment by experienced users.

Preface Willtek 4100

1-10

Inhaltsverzeichnis

Andere WILLTEK Prüfgeräte Handbücher

WILLTEK

WILLTEK 4403 Stücklistenhandbuch

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung