2. INSTALLATION
Before operating your heater for the first time, you should carefully read the instructions manual.
After receiving the unit, you should check that your heater has been damaged during transport. In the
event of damage, you should inform the sender immediately.
Damage during transport should be reported after unpacking the equipment. The seller or specialised
reseller should be contacted immediately.
Keep the packaging of the heater in a safe place in order to be able to dispatch the heater safely should
it require servicing. In order to save space, you can simply cut through the adhesive tape using a knife
and fold up the cardboard box.
During installation and use, proceed as follows:
•Check the contents of the box of your electric heater. If the appliance is damaged or any of the
accessories are missing, contact the point of sale immediately.
•Check the unit for damage.
•Check the appliance before each use and that the conditions are suitable for proper operation.
•Carefully read the “Installation Requirements”, which describe what you need to install your heater.
•Make sure that the characteristics of the electrical system match the characteristics referred to in the
“Technical data”;
•Before connecting, make sure that there are no foreign objects in the unit preventing rotation of the
fan. If there are, you may try to remove them using compressed air.
Where this fails, contact a qualified technician. As described in “Maintenance and cleaning”, the
dismantling and repair of the equipment must only be carried out by qualified personnel!
•Plug the power cord into a power outlet (230 V / 50 Hz / 16 A).
•Place the heater in the desired location.
•Lock the front casters to ensure stability.
•The appliance is ready for use.
3. TRANSPORT AND STORAGE
Transport
•Turn off the power.
•Wait until the unit has cooled down.
•Transport the heater using the handle on the top of the heater.
•Ensure that the unit does not slip and remains stable during transport.
Storage
Where the heater is not used for an extended period of time, it must be properly covered and stored in
order to avoid damage.
You should therefore:
•Unplug the appliance from the power outlet.
•Choose a dust-free storage location and cover the appliance.
•Store the appliance in a dry place and prevent moisture from entering the appliance.
•Store the appliance at all times protected from lightning and other unpredictable atmospheric
conditions.
•Locate the appliance in a safe place to avoid possible falls that may endanger people or damage the
appliance.
- 5 of 11 -
