Wilo RS485 Bedienungsanleitung

Wilo-IF-Module Stratos RS485

Pioneering for You

2 105 328-Ed.02 / 2013-11-Wilo

de Einbau- und Betriebsanleitung

en Installation and operating instructions

fr Notice de montage et de mise en service

es Instrucciones de instalación y funcionamiento

it Istruzioni di montaggio, uso e manutenzione

Fig. 1:

L N SSM

Achtung

Option

IF-Modul

Netzspannung

Attention

MainsVoltage

Attention

1 - 230V

IF-Modul

pnnung

Attention

MainsVoltage

4a 4b 4c

~15 mm

de Einbau- und Betriebsanleitung 3

en Installation and operating instructions 18

fr Notice de montage et de mise en service 33

es Instrucciones de instalación y funcionamiento 48

it Istruzioni di montaggio, uso e manutenzione 63

English

18 WILO SE 11/2013

Installation and operating instructions

1 General

1.1 About this document

The language of the original operating instructions is German. All other lan-

guages of these instructions are translations of the original operating instruc-

tions.

These installation and operating instructions are an integral part of the product.

They must be kept readily available at the place where the product is installed.

Strict adherence to these instructions is a precondition for the proper use and

correct operation of the product.

These installation and operating instructions correspond to the relevant version

of the product and the underlying safety standards valid at the time of going to

print.

2Safety

These operating instructions contain basic information which must be adhered

to during installation and operation. For this reason, these operating instruc-

tions must, without fail, be read by the service technician and the responsible

operator before installation and commissioning.

It is not only the general safety instructions listed under the main point “safety”

that must be adhered to but also the special safety instructions with danger

symbols included under the following main points.

Installation and operating instructions Wilo-IF-Modules Stratos RS485 19

English

2.1 Indication of instructions in the operating instructions

Symbols:

General danger symbol

Danger due to electrical voltage

Note

Signal words:

DANGER!

Acutely dangerous situation.

Non-observance results in death or the most serious of injuries.

WARNING!

The user can suffer (serious) injuries. 'Warning' implies that (serious) injury

to persons is probable if this information is disregarded.

CAUTION!

There is a risk of damage to the product/unit. 'Caution' implies that damage

to the product is likely if this information is disregarded.

NOTE: Useful information on handling the product. It draws attention to possi-

ble problems.

English

20 WILO SE 11/2013

2.2 Personnel qualifications

The installation, maintenance and repair personnel must have the necessary

qualifications for this work.

2.3 Danger in the event of non-observance of the safety instructions

Non-observance of the safety instructions can result in risk of injury to persons

and damage to product/unit. Non-observance of the safety instructions can

result in the loss of any claims to damages.

In detail, non-observance can, for example, result in the following risks:

• Failure of important product/unit functions

• Failure of required maintenance and repair procedures

• Danger to persons from electrical, mechanical and bacteriological influences

• Property damage

2.4 Safety instructions for the operator

The existing directives for accident prevention must be adhered to.

Danger from electrical current must be eliminated. Local directives or general

directives [e.g. IEC, VDE etc.] and those of local power supply companies must

be adhered to.

This device is not intended to be operated by persons (including children) with

impaired physical, sensory or mental capacities or lack of experience and/or lack

of knowledge, except in cases where they are supervised by a person responsi-

ble for their safety or where they receive instructions from such a person as to

how the device is to be operated.

Children must be kept under supervision in order to ensure that they do not play

with the device.

Installation and operating instructions Wilo-IF-Modules Stratos RS485 21

English

2.5 Safety instructions for inspection and installation work

The operator must ensure that all inspection and installation work is carried out

by authorised and qualified personnel, who are sufficiently informed from their

own detailed study of the operating instructions.

Work on the product/unit should only be carried out when it has been brought

to a standstill. It is mandatory that the procedure described in the installation

and operating instructions for shutting down the product/unit be complied

with.

2.6 Unauthorised modification and manufacture of spare parts

Modifications to the product are only permissible after consultation with the

manufacturer. Original spare parts and accessories authorised by the manufac-

turer ensure safety. The use of other parts can nullify the liability from the

results of their usage.

2.7 Improper use

The operating reliability of the supplied product is only guaranteed if the prod-

uct/unit is used as intended in accordance with Section 4 of the operating

instructions. The limit values must on no account fall under or exceed those

specified in the catalogue/data sheet.

Inhaltsverzeichnis

Andere Wilo Steuereinheit Handbücher

Wilo

Wilo Wilo-VR-System Bedienungsanleitung

Wilo

Wilo Stratos Smart IF module Bedienungsanleitung

Wilo

Wilo VeroLine-IP-E Bedienungsanleitung

Wilo

Wilo BM-S Bedienungsanleitung

Wilo

Wilo Control EC-Fire Bedienungsanleitung

Wilo

Wilo IF-Modul Stratos PLR Bedienungsanleitung

Wilo

Wilo JetValve Bedienungsanleitung

Wilo

Wilo Wilo-CC-System Bedienungsanleitung

Wilo

Wilo RexaBloc RE Bedienungsanleitung

Wilo

Wilo Easy Control MS-L 1x4kW Bedienungsanleitung

Wilo

Wilo Wilo-Star-Z NOVA Bedienungsanleitung

Wilo

Wilo Control EC-L1 Series Bedienungsanleitung

Wilo

Wilo ER 1 Bedienungsanleitung

Wilo

Wilo CAN Bedienungsanleitung

Wilo

Wilo IF-Modul PLR Bedienungsanleitung

Wilo

Wilo Yonos MAXO Series Bedienungsanleitung

Wilo

Wilo Smart Connect Module BT Bedienungsanleitung

Wilo

Wilo Wilo-Control SC-Booster Series Bedienungsanleitung

Wilo

Wilo IF-Modul Stratos CAN Bedienungsanleitung

Wilo

Wilo Wilo-Star-Z 20/1 Bedienungsanleitung

Wilo

Wilo IF-Module Stratos Bedienungsanleitung

Wilo

Wilo Wilo-Control EC-L Bedienungsanleitung

Wilo

Wilo Control MS-L Series Bedienungsanleitung

Wilo

Wilo Control SC-L Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung