WilTec Toboli 62793 Bedienungsanleitung

User’s manual

Stepper with training computer

62793

Illustration similar, may vary depending on model

Please read and follow the operating instructions and safety information prior to initial operation.

Technical changes reserved!

Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further

developments.

http://www.toboli.com 07 2022-1

The information contained in this document may alter at any time without prior notice. No part of this

WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-

ual, nor in the diagrams and illustrations shown.

Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating

manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.

If you have found an error or wish to suggest an improvement, we look forward to hearing from you.

Send us an e-mail to:

[email protected]

or use our contact form:

https://www.wiltec.de/contacts/

The most recent version of this manual in several languages can be found in our online shop:

https://www.wiltec.de/docsearch

Our postal address is:

WilTec Wildanger Technik GmbH

Königsbenden 12

52249 Eschweiler – Germany

To return your goods for exchange, repair, or other purposes, please use the following address. Atten-

tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team

before returning your goods.

Retourenabteilung

WilTec Wildanger Technik GmbH

Königsbenden 28

52249 Eschweiler – Germany

E-mail: service@wiltec.info

Tel: +49 2403 55592–0

Fax: +49 2403 55592–15

http://www.toboli.com 07 2022-1

Introduction

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to

always take some basic safety precautions when using this product. Please read this operating manual

carefully and make sure that you understand it.

Keep these operation instructions in a safe place.

Safety instructions

•Only use the stepper as inside training device.

•It is not suitable for commercial or therapeutic use.

•The maximum capacity of 100 kg must not be exceeded.

•Only use the device according to the intended use defined in this manual. Every incorrect use

might lead to injuries.

•The stepper can be used by persons with reduced physical, sensory, or mental abilities or a

lack of experience or knowledge if a person responsible for their safety observes them during

use or has informed them on the safe use and if they are able to understand the dangers that

could occur.

•Do not permit children to use the stepper without supervision. Children must not play with the

device. Children may only clean and maintain the device if they are supervised.

•Do not leave the stepper unattended during use.

•Only place the stepper on a flat, level, and non-slip surface and make for a safe stand. If nec-

essary, protect the floor by placing a mat.

•The stepper can only be used by one person at the same time. It is strictly forbidden that more

than one person uses the stepper at the same time.

•Before any use, check the stepper for damages and loose components, especially the tread

surfaces. Do not use the stepper in case it is damaged. Only have a qualified person repair the

stepper.

•Before beginning your training, ask a doctor to detect and avoid possible risks to your health.

•Warm up sufficiently before each training unit to avoid injuries.

•During training, pay attention to what your body tells you. Should you feel pain or should you

determine unusual symptoms (chest pain, irregular heartbeats, extreme breathlessness, dizzi-

ness, or numbness), immediately interrupt your training and see a doctor.

•Observe a safety distance around the stepper.

•Keep small children and domestic animals away from the stepper.

•During training, wear suitable sport clothes. Do not wear loose clothing, as it could be caught in

moving parts.

•Make sure that the hydraulic piston does not get too hot. Do not touch it immediately after a

training unit.

http://www.toboli.com 07 2022-1

Parts list and names

№

Name

Quantity

Tread surfaces

Training computer

Adjusting knob

Hydraulic cylinder

Base

Guide pulley

Assembly

Place the adjusting knob as shown and set it to the correct position. By turning the adjusting knob, you

can adjust the height of the tread surfaces; this will reduce or increase the degree of difficulty.

http://www.toboli.com 07 2022-1

Training computer

Read

Display of different kinds of functional values in automatic order.

Time

Display from 0 to 99:55

Calories

Display of calory consumption during training. This display is only to be considered as approximate

value; it is note a medical estimation.

Count

Display of number of steps (steps per minute)

Mode

You can select between different functional buttons. Keep this button pressed during 3 s to re-initialise

all values and to begin a new counting.

Note! Each activation will activate the display. Press the mode button to choose one of four functions

(times/seconds, time, calories, automatic scan). The small arrows shown on the display screen indicates

different functions that correspond to the four arrows found under the screen.

Automatic scan

The screen automatically shows the times/seconds, time, and calories during 4 s when you have chosen

this function.

Automatic deactivation

If there is no entry during 4 s, the screen is deactivated automatically. By activating or touching the mode

button, the entry signal is read again.

http://www.toboli.com 07 2022-1

Starting the training

Note! Place the stepper on a level surface. It is advisable to place a protecting mat or non-slip cover

under the stepper to avoid that the floor is damaged from continuous use.

Step 1

Place the left foot onto the left tread surface and push it down until it touches the floor.

Step 2

Place the right foot onto the right tread surface.

Step 3

First begin your training slowly and familiarise yourself with the order of steps before accelerating. If

wanting to adjust the tread surfaces, first dismount, then adjust with the help of the adjusting knob.

Training frequency

It is advisable that you do sports every two days. At the beginning, you can for example do a 5-min

training, then, step by step, increase the time to 15 min up to 30 min or 3 training units of 10 min each.

You may of course exercise every day on the stepper; however, you should pay attention to not over-

straining yourself.

Post-training rest

To avoid sore muscles the next day, it is important to do some stretching before and after your training.

http://www.toboli.com 07 2022-1

Regulations for waste disposal

The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU was

implemented in the German law related to electrical and electronic equipment and appliances.

All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed-

out wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with the

domestic waste.

WilTec Technik GmbH is registered with the German registration authority EAR (Stiftung Elektro-

Altgeräte Register) under the WEEE-registration number DE45283704.

Disposal of used electrical and electronic devices (in-

tended for use in the countries of the European Union

and other European countries with a separate waste

collection system for these devices).

The symbol on the packaging or the product itself indi-

cates that this product must not be treated as normal

domestic waste but must be disposed of at a recycling

collection station for electrical and electronic waste.

By disposing of this product correctly, you contribute to

the protection of the environment and the health of your

fellow people. Inappropriate disposal threatens the en-

vironment and health.

Material recycling helps to reduce the consumption of raw materials.

Additional information about the recycling of this product can be provided by your local commune, the

municipal waste disposal facilities, or the store where you purchased the product.

Address:

WilTec Wildanger Technik GmbH

Königsbenden 12 / 28

52249 Eschweiler Germany

Important Note:

Reproduction and any commercial use (of parts) of this operating manual, requires a written permission

of WilTec Wildanger Technik GmbH.

Inhaltsverzeichnis

Andere WilTec Steuereinheit Handbücher

WilTec

WilTec DQ220 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

WilTec toboli 62793 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken