Windhager VarioWIN Bedienungsanleitung

Quick guide

VarioWIN pellet central heating boiler

Operating phases are displayed

here, including Standby, Burner

OFF, etc.

Menu line

Signal lamp (LED)

„Operation“ – green

Full-text display

(illuminated display)

Assignment of buttons to

their specific function

Manual operation / flue cleaning

function

ON/OFF button

Menu buttons

RESET

Boiler temperature

Standby

Info Menu

38°C

07/2012 092948/02

Ending function: Press the Cancel button or automatically after about 45 minutes.

Chimney sweeper func.

Power 100% 45 min

(Operating phases)

30% Cancel 100%

42°C

(Symbol flashes)

Chimney sweeper func.

Power 30% 45 min

(Operating phases)

30% Cancel 100%

42°C

(Symbol flashes)

Pressing the corresponding menu button enables the boiler to be operated with 30 % (= part load) or 100 % output.

The operating time is reset to 45 min. when the Manual operation / chimney sweeper function button is pressed

again.

Chimney sweeper function

Starting: Briefly press the Manual operation / chimney sweeper funktion button (the lighting/display is switched

on), press the button again briefly, the boiler temperature is set to about 60 °C for 45 min.

Removing ash and cleaning boiler and burner

Note!

The ash may be loaded with heavy metals. Heavy metals may affect soil fertility. Ash is not there-

fore suitable as a fertiliser and should be disposed of with residual waste.

Warning of hot surface: risk of burns!

Before touching these surfaces, you must switch off the boiler and let it cool.

Attention!

Do not open the combustion chamber door during operation. Always switch the boiler off first with

the ON/OFF button and wait until burnout mode has finished.

Risk of fire if ash hasn‘t cooled! Store ash in lockable and non-combustible container on non-

combustible base for at least 48 hours.

InfoWINplus

The lighting/display is initially switched on for 10 min. by briefly pressing a button. The corresponding function is

then started by pressing the button again.

A brief explanation of the most important functions of the operating unit:

The “Clean boiler and burner” cleaning request is displayed

Display on InfoWINplus IN 590 or FE 390

The VarioWIN is equipped with a cleaning interval display. The cleaning request for the combustion chamber and

burner pot is displayed on the InfoWIN and must be reset after cleaning has finished.

Cleaning:

a) Take out the baffle plate and remove the ash (VarioWIN 120 only).

b) Clean fly ash off the thermocontrol sensor with a cleaning brush.

c) Fallrinne reinigen.

d) Clean the burner pot.

e) Empty the ash pan(s) or remove the ash from the heating surface duct

f) Check that there is not too much dust in the VarioWIN reserve supply container and that there is no bridge

formation – remove the dust.

Cleaning the baffle plate

Thermocontrol sensor down chute Thermocontrol sensor

Subject to technical modifications. AWP-vor-übersetzt aus 023824/03

Removing ash

VarioWIN Premium approx. every 400 kg pellets or VarioWIN Exklusiv-S / Exklusiv approx. every 1200 kg pellet

a) Insert the key for manual heating surface cleaning (VarioWIN Premium only) and move it back and forth se-

veral times.

b) Empty both ash pans.

Connect the key and operate it several times Emptying the ash pan

Ash pan for

heating surfaces

Ash pan for

combustion chamber

VarioWIN 120

VarioWIN 060 VarioWIN 060 VarioWIN 120

1...........Cleaning tool and, for VarioWIN 120, removal device for cone

2...........Guide groove for locking the cone in the burner pot

3...........Cone

4...........Primary air pin

5...........Grate plate

6...........Secondary air holes

7...........Lock for cone

8...........Burner pot

Cleaning the thermocontrol sensor and down chute

Resetting the cleaning request

After the combustion chamber and burner pot have been cleaned, the operating hours counter for boiler cleaning

must be reset.

Boiler cleaning

Time

Feed operating mode

Time profile feed

Probe switching

Choose Back

Selecting “Boiler cleaning”

Has boiler and burner cleaning

been performed?

Confirm

Yes Back

Confirming with the Yes button

At least once per heating season

see operating manual.

Press the Reset button or switch on the boiler at

the InfoWINplus. Wait for the self-test to finish,

press the Menu button and change to operator le-

vel. Select the „Boiler cleaning“ sub-menu in the

operator level and confirm by pressing Yes. The

counter is reset.

Andere Handbücher für VarioWIN

Inhaltsverzeichnis

Andere Windhager Kessel Handbücher

Windhager

Windhager BioWIN 2 Bedienungsanleitung

Windhager

Windhager LogWIN Bedienungsanleitung

Windhager

Windhager Hopper L Bedienungsanleitung

Windhager

Windhager LogWIN LWP 180 Bedienungsanleitung

Windhager

Windhager PUROWIN PW 24 Bedienungsanleitung

Windhager

Windhager BioWIN series Bedienungsanleitung

Windhager

Windhager VarioWIN Bedienungsanleitung

Windhager

Windhager FireWIN Bedienungsanleitung

Windhager

Windhager LOGWIN PREMIUM TOUCH Bedienungsanleitung

Windhager

Windhager DuoWIN Bedienungsanleitung

Windhager

Windhager INFOWIN TOUCH Bedienungsanleitung

Windhager

Windhager BioWIN XL Bedienungsanleitung

Windhager

Windhager PUROWIN PWPE 60 Bedienungsanleitung

Windhager

Windhager FireWIN Bedienungsanleitung

Windhager

Windhager BIOWIN 2 TOUCH Bedienungsanleitung

Windhager

Windhager BioWIN 2 Bedienungsanleitung

Windhager

Windhager INFOWIN TOUCH Bedienungsanleitung

Windhager

Windhager BIOWIN 2 TOUCH Bedienungsanleitung

Windhager

Windhager BioWIN series Bedienungsanleitung

Windhager

Windhager LOGWIN PREMIUM TOUCH Bedienungsanleitung

Windhager

Windhager BioWIN series Bedienungsanleitung

Windhager

Windhager LogWIN Klassik Bedienungsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung