Winmate R05T100-PMD1HB Bedienungsanleitung

Please read this instructions before operating the device and retain them for future reference.

Panel Mount Display

5.7~32”

User Manual

V1.0

For more information on this

and other Winmate products,

please visit our website at:

www.winmate.com

Document Part Number: 91521110101F

USER MANUAL CONTENTS

- 2 -

CONTENTS

PREFACE - 3 -

ABOUT THIS USER MANUAL - 8 -

CHAPTER 1: INTRODUCTION - 10 -

1.1 Product Features - 10 -

1.2 Package Contents - 11 -

1.3 Product Overview - 12 -

1.4 OSD Control Panel - 14 -

1.4.1 Control Buttons - 14 -

1.4.2 LED Indicators - 15 -

CHAPTER 2: INSTALLATION - 17 -

2.1 Wiring Requirements - 17 -

2.2 Mounting Guide - 18 -

2.2.1 Panel Mounting - 19 -

2.2.2 VESA Mounting - 20 -

2.2 Cable Mounting Considerations - 21 -

2.3 Connecting Power - 21 -

2.4 Connecting Peripherals - 22 -

2.4.1 VGA Connector - 22 -

2.4.2 HDMI Connector - 23 -

2.4.3 DVI Connector - 23 -

2.4.4 S-Video - 24 -

2.4.5 Composite Video - 24 -

CHAPTER 3: OPERATING THE DEVICE - 26 -

3.1 Turning on the System - 26 -

3.2 OSD Menu Navigation - 27 -

CHAPTER 4: TROUBLESHOOTING - 31 -

4.1 Troubleshooting Guide - 31 -

APPENDIX A: FREQUENCY TABLE - 33 -

APPENDIX B: REMOTE CONTROL SET COMMAND - 35 -

APPENDIX C: REMOTE CONTROL GET COMMAND - 37 -

USER MANUAL PREFACE

- 3 -

PREFACE

No part of this document may be reproduced, copied, translated, or

transmitted in any form or by any means, electronic or mechanical, for any

purpose, without the prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in

order to improve design and/or performance. We assume no responsibility or

liability for the use of the described product(s) conveys no license or title

under any patent, copyright, or masks work rights to these products, and

make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified.

Applications that are described in this manual are for illustration purposes

only. We make no representation or guarantee that such application will be

suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material

and workmanship defects for a period of one year from the invoice date. If the

customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during

the warranty period of one year, with transportation charges prepaid. The

returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by

over 30 days, the in-warranty service will be made according to the shipping

date. In the serial numbers the third and fourth two digits give the year of

manufacture, and the fifth digit means the month (e. g., with A for October, B

for November and C for December).

For example, the serial number 1W16Axxxxxxxx means October of year

2016.

USER MANUAL PREFACE

- 4 -

Customer Service

We provide a service guide for any problem by the following steps: First, visit

the website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every

business day. We are always ready to give advice on application

requirements or specific information on the installation and operation of any of

our products.

Naming Rule

R19LXXX-PMXX

Item

Description

Panel Type

Panel Size

LXXX

Product Size

Mechanical Type(Panel Mount)

Panel Model

USER MANUAL PREFACE

- 5 -

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful

information or to alert you to the potential for hardware damage or personal injury.

These are Notes, Important, Cautions, and Warnings. The following is an

example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to

know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and

explains how to avoid the potential problem.

Unealerted’ attention indique un dommage possible à l’équipement

et explique comment éviter le problem potentiel.

WARNING!/AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from

electrical hazards and how to avoid the potential problem.

Un Avertissement de Choc Électriqueindique le potentiel de

chocssur des emplacements électriques et comment éviterces

problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates

the potential risk of serious electrical shock due to improper

grounding.

Le symbole de Miseà Terre indique le risqué potential de choc

électrique grave à la terre incorrecte.

USER MANUAL PREFACE

- 6 -

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections lorsque

l’alimentation est présente. Des composantes électroniques

sensibles peuvent être endommagées par des sauts d’alimentation.

Seulement du personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la

terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou

dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

USER MANUAL PREFACE

- 7 -

Safety Precautions

For your safety carefully read all the safety instructions before using the

device. Keep this user manual for future reference.

Always disconnect this equipment from any AC outlet before

cleaning. Do not use liquid or spray detergents for cleaning. Use a

damp cloth.

For pluggable equipment, the power outlet must be installed near

the equipment and must be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation.

Dropping it or letting it fall could cause damage.

The openings on the enclosure are for air convection and to

protect the equipment from overheating.

CAUTION/ATTENTION

Do not cover the openings!

Before connecting the equipment to the power outlet make sure

the voltage of the power source is correct.

Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over-voltage.

Never pour any liquid into an opening. This could cause fire or

electrical shock.

Never open the equipment. For safety reasons, only qualified

service personnel should open the equipment.

All cautions and warnings on the equipment should be noted.

CAUTION

Always ground yourself to remove any static charge before

touching the board. Modern electronic devices are very sensitive

to static electric charges. As a safety precaution, use a grounding

wrist strap at all times. Place all electronic components in a

static-dissipative surface or static-shielded bag when they are not

in the chassis.

USER MANUAL ABOUT THIS MANUAL

- 8 -

ABOUT THIS USER MANUAL

This User Manual provides information about using the Winmate® Panel Mount

Display. The documentation set provides information for specific user needs, and

includes:

Panel Mount Display User Manual –contains detailed description on

how to use the display, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual

product.

Document Revision History

Version

Date

Note

1.0

25-Aug-2017

New document release

USER MANUAL CHAPTER 1 INTRODUCTION

- 9 -

INTRODUCTION

This chapter gives you product overview,

describes features and hardware

specification. You will find all accessories

that come with the display device in the

packing list. Mechanical dimensions and

drawings included in this chapter.

USER MANUAL CHAPTER 1 INTRODUCTION

- 10 -

CHAPTER 1: INTRODUCTION

Congratulations on purchasing Winmate® Panel Mount Display. Versatile display

in an open-frame housing designed for rear and VESA mounting with integrated

bracket design for KIOSK applications.

The Panel Mount Display is a microprocessor-controlled to work with 5.7~32” TFT

LCD panel. It is designed to meet the demanding performance requirements of

today’s business and industrial applications.

1.1 Product Features

Winmate® Panel Mount Display features:

5.7-32”TFT LCD

1x HDMI, 1x VGA (Standard)

1 x DVI, 1 x S-Video, 1 x Composite (Optional)

Panel Mount housing

Sleek and flush mounts

Suitable for industrial applications

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Winmate Monitor Handbücher

Winmate

Winmate W07L PC Series Bedienungsanleitung

Winmate

Winmate R19L300-SDA1 Bedienungsanleitung

Winmate

Winmate GC Series Bedienungsanleitung

Winmate

Winmate W15L100-PTA3-ME Bedienungsanleitung

Winmate

Winmate R15L600-MRA3FP Bedienungsanleitung

Winmate

Winmate R19L100-67FTP Bedienungsanleitung

Winmate

Winmate W07L100-GST1-C Bedienungsanleitung

Winmate

Winmate R15L600-65C3-DVI Bedienungsanleitung

Winmate

Winmate R15L600-MLA3FP Bedienungsanleitung

Winmate

Winmate W55L100-OML2 Bedienungsanleitung

Winmate

Winmate P Series Bedienungsanleitung

Winmate

Winmate R15L100-MLC3HB Bedienungsanleitung

Winmate

Winmate W07L100-GST1 Bedienungsanleitung

Winmate

Winmate PT Series Bedienungsanleitung

Winmate

Winmate Open Frame Display Bedienungsanleitung

Winmate

Winmate B Series Bedienungsanleitung

Winmate

Winmate 19L RM Series Bedienungsanleitung

Winmate

Winmate W27L100-MLA1FP-4K Bedienungsanleitung

Winmate

Winmate R15L600-65EX Bedienungsanleitung

Winmate

Winmate R19L100-MLM1 Bedienungsanleitung

Winmate

Winmate R10L CH Series Bedienungsanleitung

Winmate

Winmate R15L600-MLA3FP Bedienungsanleitung

Winmate

Winmate W27L100-CHC1 Bedienungsanleitung

Winmate

Winmate R15L100-VMC3HB Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung