Winmate W27L100-CHC1 Bedienungsanleitung

Please read this instructions before operating the device and retain them for future reference.

27.6”/ 28.6”/ 38”

Bar-Type

Chassis Display

W27L100-CHC1

W28L100-CHA2

W38L100-CHA1

User Manual

V1.0

For more information on this

and other Winmate products,

please visit our website at:

www.winmate.com

Document Part Number: 91521110103H

USER MANUAL CONTENTS 
- 2 - 
CONTENTS 
PREFACE .............................................................................................................- 3 -
ABOUT THIS USER MANUAL ...........................................................................- 10 -
CHAPTER 1: INTRODUCTION...........................................................................- 12 -
1 Product Features ................................................................................- 12 -
2 Package Content ................................................................................- 13 -
3 Schematics and Dimensions...............................................................- 14 -
3.1 Schematics and Dimensions 27.6”............................................- 14 -
3.2 Schematics and Dimensions 28.6”............................................- 15 -
3.3 Schematics and Dimensions 38”...............................................- 16 -
4 Physical Buttons and LED Indicators..................................................- 17 -
CHAPTER 2: INSTALLATION............................................................................- 19 -
1 Safety Precautions..............................................................................- 19 -
2 Cable Mounting Considerations..........................................................- 19 -
3 VESA Mounting Guide........................................................................- 20 -
4 Powering On.......................................................................................- 21 -
4.1 AC Adapter Components ..........................................................- 21 -
4.2 Power Considerations...............................................................- 22 -
4.3 Connecting the Power...............................................................- 23 -
5 Connecting Peripherals.......................................................................- 24 -
5.1 DC Input Connector...................................................................- 24 -
5.2 VGA Connector.........................................................................- 24 -
5.3 HDMI Connector .......................................................................- 25 -
5.4 DVI Connector...........................................................................- 25 -
CHAPTER 3: Operating the Device ..................................................................- 26 -
1 Turning on the System........................................................................- 26 -
2 OSD Menu Navigation ........................................................................- 27 -
3 Troubleshooting Guide........................................................................- 29 -
APPENDIX A: PRODUCT SPECIFICATIONS....................................................- 31 -

USER MANUAL PREFACE

- 3 -

PREFACE

No part of this document may be reproduced, copied, translated, or transmitted in

any form or by any means, electronic or mechanical, for any purpose, without the

prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve

design and/or performance. We assume no responsibility or liability for the use of

the described product(s) conveys no license or title under any patent, copyright,

or masks work rights to these products, and make no representations or

warranties that these products are free from patent, copyright, or mask work right

infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only.We make no representation or guarantee

that such application will be suitable for the specified use without further testing or

modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer

discovers a defect, we will, at his/her option, repair or replace the defective product

at no charge to the customer, provide it is returned during the warranty period of

one year, with transportation charges prepaid. The returned product must be

properly packaged in its original packaging to obtain warranty service. If the serial

number and the product shipping data differ by over 30 days, the in-warranty

service will be made according to the shipping date. In the serial numbers the third

and fourth two digits give the year of manufacture, and the fifth digit means the

month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W17Axxxxxxxx means October of year 2017.

USER MANUAL PREFACE

- 4 -

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor tofind the update information about the product.Second,

contact with your distributor, sales representative, or our customer service center

for technical support if you need additional assistance.

You may need the following information ready before you call:

•Product serial number

•Software (OS, version, application software, etc.)

•Description of complete problem

•The exact wording of any error messages

In addition, free technical support is available from our engineers every business

day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products.

USER MANUAL PREFACE

- 5 -

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful

information or to alert you to the potential for hardware damage or personal injury.

These are Notes, Important, Cautions, and Warnings. The following is an example of

each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to

know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains

how to avoid the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et

explique comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from

electrical hazards and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur

des emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates

the potential risk of serious electrical shock due to improper

grounding.

Le symbole de Mise à Terre indique le risqué potential de choc

électrique grave à la terre incorrecte.

USER MANUAL PREFACE

- 6 -

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections

lorsque l’alimentation est présente. Des composantes

électroniques sensibles peuvent être endommagées par des sauts

d’alimentation. Seulement du personnel expérimenté devrait ouvrir

ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la terre

comme précaution. Placer toutes les composantes électroniques

sur une surface conçue pour dissiper les charge, ou dans un sac

anti-statique lorsqu’elles ne sont pas dans le chassis.

USER MANUAL PREFACE

- 7 -

Safety Precautions

For your safety carefully read all the safety instructions before using the

device. Keep this user manual for future reference.

•Always disconnect this equipment from any AC outlet before

cleaning. Do not use liquid or spray detergents for cleaning. Use a

damp cloth.

•For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

•Keep this equipment away from humidity.

•Put this equipment on a reliable surface during installation. Dropping

it or letting it fall could cause damage.

•The openings on the enclosure are for air convection and to protect

the equipment from overheating.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

•Before connecting the equipment to the power outlet make sure the

voltage of the power source is correct.

•Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

•If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over-voltage.

•Never pour any liquid into an opening. This could cause fire or

electrical shock.

•Never open the equipment. For safety reasons, only qualified service

personnel should open the equipment.

•All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the

following problems appear:

oThe power cord or plug is damaged.

oLiquid has penetrated into the equipment.

oThe equipment has been exposed to moisture.

oThe equipment does not work well or you cannot get it to work

according to the user manual.

oThe equipment has been dropped and damaged.

oThe equipment has obvious signs of breakage.

•Do not leave this equipment in an uncontrolled environment where the

storage temperature is below -20°C (-4°F) or above 60°C (140°F). It

may damage the equipment.

USER MANUAL PREFACE

- 8 -

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the product. When

in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vous doutez de leur provenance, contactez le

manufacturier.

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the

device.

Toujours vérifier votre mise à la terre afin que l’équipement ne

se décharge pas sur vous.

•Cover workstations with approved anti-static material. Use a wrist

strap connected to a work surface and properly grounded tools and

equipment.

•Use anti-static mats, heel straps, or air ionizer for added protection.

•Handle electrostatic-sensitive components, PCB’s and assemblies

by the case or the edge of the board.

•Avoid contact with pins, leads, or circuitry.

•Turn off power and input signals before inserting and removing

connectors or test equipment.

•Keep the work area free of non-conductive materials, such as

ordinary plastic assembly aids and Styrofoam.

•Use filed service tools, such as cutters, screwdrivers, and vacuum

cleaners that are conductive.

•Always put drivers and PCB’s component side on anti-static foam.

USER MANUAL PREFACE

- 9 -

Important Information

Federal Communications Commission Radio Frequency

Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

⚫This device may not cause harmful interference.

⚫This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B"

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

him own expense.

EC Declaration of Conformity

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the Council

directions.

Electromagnetic Compatibility Directive (2014/30/EU)

•EN55024: 2010/ A1: 2015

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2014

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

•EN55032: 2012/AC:2013

•EN61000-3-2:2014

•EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

•EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

USER MANUAL ABOUT THIS USER MANUAL

- 10 -

ABOUT THIS USER MANUAL

This User Manual provides information about using the Winmate® Bar-Type

Chassis Display. This User Manual applies to Bar-Type Chassis DisplayW27L100-

CHC1, W28L100-CHA2 and W38L100-CHA1.

The documentation set for the Bar-Type Chassis Display provides information for

specific user needs, and includes:

•Bar-Type Display User Manual –contains detailed description on how to

use the display, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual

product.

Document Revision History

Version

Date

Note

1.0

30-Nov-2018

Initial release

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Winmate Monitor Handbücher

Winmate

Winmate R19L100-67FTP Bedienungsanleitung

Winmate

Winmate W07L100-GSO1 Bedienungsanleitung

Winmate

Winmate R15L100-VMC3HB Bedienungsanleitung

Winmate

Winmate DS424PMB Bedienungsanleitung

Winmate

Winmate W15L100-PTA3-ME Bedienungsanleitung

Winmate

Winmate W24L100-SPA269 Bedienungsanleitung

Winmate

Winmate R15L600-65A1FTP Bedienungsanleitung

Winmate

Winmate W07L100-POT1-C Bedienungsanleitung

Winmate

Winmate W27L100-MLA1FP-4K Bedienungsanleitung

Winmate

Winmate R15L600-65EX Bedienungsanleitung

Winmate

Winmate R08L100-MLU1 Bedienungsanleitung

Winmate

Winmate R05T100-PMD1HB Bedienungsanleitung

Winmate

Winmate R15L100-GCC3-C Bedienungsanleitung

Winmate

Winmate Military M270TF-MIL Bedienungsanleitung

Winmate

Winmate B Series Bedienungsanleitung

Winmate

Winmate W32L100-PTA1-SDI Bedienungsanleitung

Winmate

Winmate R10L CH Series Bedienungsanleitung

Winmate

Winmate R15L100-MLC3HB Bedienungsanleitung

Winmate

Winmate GC Series Bedienungsanleitung

Winmate

Winmate W55L100-OML2 Bedienungsanleitung

Winmate

Winmate W07L100-GST1-C Bedienungsanleitung

Winmate

Winmate W24L100-SPA2 Bedienungsanleitung

Winmate

Winmate W07L100-GCO1-HB-C Bedienungsanleitung

Winmate

Winmate R19L100-MLM1 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung