Winmate E430T Series Bedienungsanleitung

E430T Series

Elegant Industrial PDA

User Manual

Notes:

All screens in this guide are simulated. Actual displays may be different.

Depend on the different software version on your E430T; you may get different screens with same

tasks.

Unless specified otherwise, all instructions to perform tasks in this guide assume that you are starting

from the home screen.

FEDERAL COMMUNICATIONS COMMISSION

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

RF exposure warning

The equipment complies with FCC RF exposure limits set forth for an uncontrolled

environment.

The antenna(s) used for this transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

RF exposure information (SAR)

This Elegant Industrial PDA meets the government's requirements for exposure to

radio waves. This Elegant Industrial PDA is designed and manufactured not to

exceed the emission limits for exposure to radio frequency (RF) energy set by the

Federal Communications Commission of the U.S. Government. The exposure

standard for wireless Elegant Industrial PDA employs a unit of measurement known

as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.

Tests for SAR are conducted using standard operating positions accepted by the

FCC with the Elegant Industrial PDA transmitting at its highest certified power level in

all tested frequency bands. Although the SAR is determined at the highest certified

power level, the actual SAR level of the Elegant Industrial PDA while operating can

be well below the maximum value. This is because the Elegant Industrial PDA is

designed to operate at multiple power levels so as to use only the poser required to

reach the network. In general, the closer you are to a wireless base station antenna,

the lower the power output. The highest SAR value for US model Elegant Industrial

PDA as reported to the FCC when tested for use at the body, as described in this

user guide, is 0.770 W/kg.

Before starting to use E430T

1) Insert Micro SD / SIM card (Optional)

The built-in storage space of your E430T series PDA is mainly used for operation system. To enable some

functions need bigger storage space, such as camera or other APP, please insert a Micro SD card before

using.

2) Charge the Battery

The battery in your new E430T series device is not charged yet. Please charge with the bundled USB

cable before your first use.

Caution! Please don’t remove the battery pack or try to take this PDA apart while the E430T is charging.

These actions will result in some damages and may invalidate your warranty.

3) Some tips for using and caring your PDA

Your E430T series PDA is designed to resist damages from certain rugged conditions. However, to help

care for your PDA, please avoid prolonged or extreme exposure to those conditions.

To ensure the rugged design works and protects your PDA, please be sure the USB connector

cover is closed and the back cover is screwed properly.

Don’t leave your PDA near a heat source; this can damage the device.

Avoid dropping your PDA on a hard surface; this can potentially cause damage to the device.

To clean your PDA, use a dry soft cloth. Don’t use alcohol or other cleaning solutions.

Please don’t have your PDA contact with water when the cover is opened. The water-proof design

works only when the outer case is sealed properly.

Note: Certain apps and features may not be available in all countries.

To know your Ex430xx more

the important keys & connectors

Front View

Volume

Power:

Press = sleep

hold = power

Function Key

3.5 mm

headset

Webcam

Proximity & Light Sensor

LED indicator

Earpiece

4.3” Touch

Screen

Home

Back

Micro USB

Microphone

Back View

LED

5M Pixels Camera

Speaker

START

Please follow the E43xx QIG to set up E43xx

1. Make the Ex430xx facing down, and then unscrew the screws of Ex430xx.

2. Gently pull Ex430xx out of its back cover.

3. Pull the plastic strap, and then remove the battery.

4. Push the metal cover backward and lift the metal cover. Then put the SD card into the socket, close the

metal cover and push forward till click sound.

5. Reinsert the battery again.

6. Fix the back cover with screws.

7. Use the supplied power adapter and USB cable to charge Ex430xx for 4hrs.

Note: This product uses a non-removable battery. The battery should only be removed when you

want to changed SD card.

Set up and Go

Turn on

Go to Setting

Set Language

Andere Handbücher für E430T Series

Inhaltsverzeichnis

Andere Winmate PDA Handbücher

Winmate

Winmate E500RM8 Series Bedienungsanleitung

Winmate

Winmate S430T-CE Bedienungsanleitung

Winmate

Winmate E430 Series Bedienungsanleitung

Winmate

Winmate E500 Series Bedienungs- und Wartungsanleitung

Winmate

Winmate S430T series Bedienungsanleitung

Winmate

Winmate E430 Series Bedienungsanleitung

Winmate

Winmate S430T2-M Series Bedienungsanleitung

Winmate

Winmate E430M2 Series Bedienungsanleitung

Winmate

Winmate E430 Series Bedienungsanleitung

Winmate

Winmate S430T2-NKC Bedienungsanleitung

Winmate

Winmate E500QK Bedienungsanleitung

Winmate

Winmate E430 Series Bedienungsanleitung

Winmate

Winmate S430M4 Series Bedienungsanleitung

Winmate

Winmate E500RM8-ME Bedienungsanleitung

Winmate

Winmate E430RM4L Series Bedienungsanleitung

Winmate

Winmate C350T Series Bedienungsanleitung

Winmate

Winmate E430RM4L-4E Bedienungsanleitung

Winmate

Winmate E430RM2 Series Bedienungsanleitung

Winmate

Winmate S430T2-NKM Series Bedienungsanleitung

Winmate

Winmate S430T2-C Bedienungsanleitung

Winmate

Winmate E430T Series Bedienungsanleitung

Beliebte PDA Handbücher anderer Marken

SPOT

SPOT SPOT Bedienungsanleitung

Palm

Palm handheld Bedienungsanleitung

Getac

Getac PS236 Bedienungsanleitung

Sharp

Sharp CE-1600P Bedienungsanleitung

HTC

HTC PHAR100 Bedienungsanleitung

Mindeo

Mindeo M40 Bedienungsanleitung

Acer

Acer n30 Bedienungsanleitung

ASCOM

ASCOM 9D24 EX Bedienungsanleitung

Unitech

Unitech PA520BTNF Bedienungsanleitung

HandHeld

HandHeld Nautiz X3 Bedienungsanleitung

Casio

Casio PALM Bedienungsanleitung

Sharp

Sharp TM-20 Kurzanleitung

Atid

Atid AT870 Bedienungsanleitung

AML

AML M7225 Bedienungsanleitung

Audiovox

Audiovox Maestro Technisches Handbuch

Casio

Casio PV-750 Plus Gebrauchsanweisung

Unitech

Unitech PT630 Bedienungsanleitung

PSC

PSC Falcon 4220 Bedienungsanleitung