Wintal LRC8 Bedienungsanleitung
Introduction
Thank you for your purchasing our Learning Digital LCD Universal Remote Control.
You have selected a newly designed remote control with latest concept and fastest
way to set up direcltly by the brand name and code No.
This universal remote control almost works with all brands of Televisions (TV),
DVD-players and DVR-players (DVD), DVB receivers and (digital) Satellite receivers
and Cable box (DVB), Video Recorders (VCR), Tuner receivers (TUNER),
Tape receivers (TAPE), CD-players (CD), Audio amplifiers and LD-players
and other Audio (AUX).
You can use Auto Search to scan the code library in case that you can not find your
device brand in the code list.
This Remote control also can learn a new code from an original remote control to
supplement the codes in case of its shortage.
Show View function scans all channels to let you have quick view.
All off function can switch on or off all your devices with one button.
Macro function makes several sequent operations with one button for your home theater.
Volume lock can fix VOL+/VOL- button to control Amplifier only for your home theater.
Device lock can fix the device against changing by a new set up until you unlock it.
Backlight for LCD screen and separate device backlight to show you the currently
working device.
Low battery indication to remind you when need to replace batteries.
All the set up data will be stored in back up memory permanently, you don't need to
worry about data loss when you replace battery.
Real time clock to show you time, AM or PM.
Please enjoy the time with this new intelligent LCD Universal Remote Control.
Device Code Assignment
Total codes: 1839
Bank
TV
VCR
DVB
DVD
CD
TUNER
TAPE
AUX
for Device
TV
VCR
Satellite Cable DVB
DVD DVR
CD
TUNER
TAPE
AMP LD VCD
Initial code
048
075
075
026
035
039
067
032
Total of codes
488
182
403
190
124
114
134
204
1
Key Functions
MUTE
DISPLAY
SHOW VIEW
+
+
SET
Starting to set up the remote control or show you the
status of LCD screen.
LEARN
Setting up learning functions.
TV VCR DVB CD DVD TUNER TAPE AUX
Selecting the device which you want to control.
POWER
Turning the device on or off.
AV
Works like the TV/Video key on your original TV
remote, and TV/SAT key on your original satellite
remote, A.B in cable and CD modes.
MENU
Works like the Menu or OSD (on-screen display)
or Memory key on your original remote control.
CH
Works like the Channel Up and Down on your
original remote control.
VOL
Control the volume like the Volume Up and Down
on your original remote control.
REW
Fast reverse.
PLAY
Turn on your DVD, CD etc.
FFWD
Fast forward
REC
Record
Key Functions
3
STOP
Terminate your operation.
PAUSE
Terminate the operation for a moment and standby.
SHOW VIEW
Scans all channels for you to quick view all programs.
All off
Switches on or off all your devices only with one button.
Macro
Let you make sequent operations of your home theater.
Display
Displaying info on the selected channel.
Key to mute the sound.
0-9
The number keys operate the same function as on your original remote control,and
maybe also used for entering device codes when setting up.
Works like the enter on your original remote.
OK EXIT
Works like the UP，DOWN，LEFT，RIGHT，OK，EXIT Keys on your original
remote control as menu function. But during set up mode,they are only used as cursor,
confirm and exit from programming your remote control.
Television video
TV and text mixed
Teletext mode
Page hold�
RED YELLOW BLUE GREEN buttons are for TV Fast Text.
1. Turn on the device (e.g. TV) you would like to operate. If it is a VCR, Please insert
a tape.
2. Press and hold SET key on your remote control. Then press (simultaneously)
one of the device keys (e.g. TV)
3. Then release them, the Brand will be displayed on the screen.
4. You can press the or key to select the brand of your device (e.g. Your TV brand:
Life)
5. Check the function of the keys. If none of the keys of your new remote control can
work, or most of the keys work improperly, please try another code by or key,
until all basic functions operate properly.
6. If you are satisfied with the code, just press OK key to save it. LCD shows SUCCESS
and then finishes the set up.
TV 048
11:58
TV 010
12.00
ACCENT
023
ACME
ACME
004
010
SUCCESS
SET+TV OK
OK
OK
AM
PM
Remark:
1. To return to beginning status, press the EXIT key or the device key (e.g. TV, or VCR...)
2. You must point your remote control to the device that you want to control when you test the keys.
3. OK, EXIT is only used to set-up your new remote control during set up process. You can't
control your device as normal menu function at this moment until you quit from setting up.
4. If the device is locked, you must first unlock the device to set up.
Set-up by Auto Search
If set-up by brand and the code failed or you cannot find the brand name of your own
device in remote control screen, you may use the Auto Search to find the correct code
to operate your device.
1. Turn on the device (e.g. TV) you would like to operate. If it is a VCR, Please insert
a tape.
2. Press SET key on your new remote control for more than 3 seconds, then release it.
3. Press the or keys to select CODE SETUP in the LCD menu, and press OK key.
4. The screen shows the DEV SEARCH in the LCD menu, and press OK key, then
press device key to select your desired operation device(e.g. TV) and then
4
Device Set- Up
Direct Set - Up by Brand and Code
1S'
5
DVD
12:02
026
PM
SEARCHING�
CODE SETUP DEV SEARCH
SET 3S' OK
OK
OK
DVD 026
TV 048
TV
11 :45 AM
055�
Remark:
1. If you do not stop the search in time when the device reacts, you may press the or key to search
back to find the passed code.
2. OK, EXIT is only used to set-up your new remote control during the Auto Search, you can't
control your device for menu function at the moment until you quit from the set up.
3. When remote control searches through all codes, the remote control will stop at the beginning code of
the search.
4. If the device is locked, you must first unlock the device then set up.
Set-up by Entering Code
1. Turn on the device, which you would like to control (e.g. TV ).
2. In the back section of this manual, find the brand name and code No. of your
device brand (e.g. Lifetec 003,010,062,).
3. Press SET key on your new remote control for more than 3 seconds, then
release it.
4. Press the or keys to select CODE SETUP in the LCD menu, and press
OK key.
5. The screen shows DEV SEARCH in the LCD menu, press the or keys to
select DEV SETUP in the LCD menu, and press OK key.
Device Set- Up
press OK key to start Auto Search.(You must point your remote control to
your device at the moment)
5. See if the device reacts or not, once the device reacts, press any key to stop the
search.
6. Test if most of the keys work well or not. If most keys work not good enough, please
repeat step 4~5.
7. If you find satisfied code please press OK key to save it and LCD shows
SUCCESS and then show DEV SEARCH. You can press device key (e.g. DVD)
again to finish SET UP or use or to select other set up.
Press any key to stop search if your device reacts,
Then test the key functions.
TV
TV 048
OK
SUCCESS 1S'
DEV SEARCH
Learning
The LEARN feature is used to supplement the preprogrammed code list. The
standard code list may provide most of the functions needed, but you can add a small
number of additional functions for your remote control, or you can add a new code
from a new remote control which is not in the code list.Under learning mode, you must
need to prepare another remote control that you will take the codes into this remote
control.You can select LEARN KEY to learn commands, or DELETE KEY to delete
learn commands, or choose DELETE DEV to delete all commands under a device, or
DELETE ALL for all learnt commands under all device in learning category.
Learn a Command
1. Press a device key (e.g. TV) where you want to learn .
2. Press and hold the SET key for more than 3 seconds, then release it. Or you can
press Learn key for more than 3 Seconds then you can enter into learning mode
directly.
3. Scroll or key to LEARNING in the LCD menu, then press the OK key.
6
Device Set- Up
6.Then you press device key to select your desired operation device(e.g. TV) and then
press OK key, you must now enter the 3-digit device code (e.g. 003 for Lifetec TV)
7.Press OK key to save it and LCD shows SUCCESS, and press EXIT key two times
to exit from the SETUP mode.
8. You check the function of the keys on remote control. If most keys on your new
remote control do not work properly, try another 3-digit device code (e.g. 010…) from
the list under the same brand. Repeat steps 3 to 7 until all the basic functions operate
correctly.
12:02
075
PM
TV
CODE SETUP DEV SEARCH
SET 3S' OK
TV
OK
DEV SETUPVCR 075
048
OK
VCR
TV 003
Press code number. (eg.003)
DVE SETUP
SUCCESS 1S'
MUTE
DISPLAY
SHOW VIEW
Learning eye
50mm
Remark:
1. A selected target key can be multi learnt from different source keys, it will store the final learnt
signal only.
2. All usual function keys can be learnt except Show View, Macro, Set, Learn, All off .
3. Some code form may not be learnt by this remote control
4. You can learn about 100 keys total for 8 devices.
Delete the Learnt Key
If you like to delete a learnt command, you can follow the steps as below:
1. Press the device key (e.g. TV) where the command you like to delete.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Scroll or key to LEARNING in the LCD menu, then press OK key and
the LCD display LEARN KEY.
7
Learning
4. Scroll or key to LEARN KEY in the LCD menu and then press OK key.
The LCD displays SELECT KEY.
5. Select the (target) key you want to learn (e.g. Power) on new remote control.
Then LCD shows "WAITING".
6. Point the transmitter of the original remote control remotes face to the receiver
window of this universal remote by approximately 30mm apart.
7. Press and hold the original remote key (e.g. Power) until the LCD display SUCCESS
for 1 second. If LCD display FAILED, please Repeat Steps 4-6.
8. Repeat Step 4-6 to learn more other keys.
SET 3S
OK
OK
TV 048
11:45
CODE SETUP LEARNENG
LEARN KEY
SELECT KEY
WAITING Press a source Key
from original remote
to learn next key
SUCCESS
Press a target key
(e.g. Power)�
Original Remote Control
Universal Remote Control
TV
11:45
048 CODE SETUP LEARNING
LEARN KEY
DELETE KEY
SUCCESS
SELECT KEY
SURE DELET
SET 3S' ok
ok
ok
Seiect a key you want to delete
Delete All Learnt Command of a Device
If you like to delete all learnt commands in a device once, instead of deleting every key
one by one, please follow below steps:
1. Press a device key (e.g. TV) where you want to delete commands .
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Scroll or key to LEARNING in the LCD menu, and then press the OK key and
the LCD display LEARN KEY.
4. Scroll or key to DELETE DEV in the LCD menu and then press the OK key.
5. Select device you want to delete, then press OK key.
6. The LCD shows SURE DELET and then press OK key, the LCD shows SUCCESS.
7. Repeat step 5 to delete commands in other devices.
8. Press EXIT key (e.g. TV) to quit from deleting operation.
SUCCESS CODE SETUP
DELETE DVE
LEARNENG
LEARN KEY
SET 3S'
ok
SELECT DVE ok
8
Learning
4. Scroll or key to DELETE KEY in the LCD menu and then press OK key.
5. Press the key that you want to delete, the LCD shows SURE DELET and then
press the OK key to confirm, the LCD will show SUCCESS .
6. Repeat Step 4 to delete other keys you want.
7. Press a device key (e.g. TV) to quit the delete operation when all desired remote
commands are deleted.
ok
ok
SELECT KEY
1S'
ok
SURE DELET SUCCESS
SELECT DVE
Select a device you
want to delete
(eg.TV)
ok
IS'�
Remark: It will take about 3 minutes for delete all commands in one device. If the commands are not so many,
we suggest you delete commands one by one.
Delete All Learnt Keys
If you like to delete all learnt commands in the unit, please follow the below steps:
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Scroll or key to LEARNING in the LCD menu, then press OK key, LCD
shows LEARN KEY.
3. Scroll or key to DELETE ALL in the LCD menu and then press OK key.
4. The LCD shows SURE DELET, then press OK,LCD shows SUCCESS to finish
the deletion.
TV 048
11:45
CODE SETUP LEARNING
LEARN KEY
OK
OK
OK
DELETE ALL
SURE DELET
SUCCESS TV 048
11:45
SET 3S'
9
Learning
OK
TV 048
11:45 AM
CODE SETUP
MACR02
SET UP
SELECT KEY SUCCESS MACRO1
MACRO
MACRO1
ok
orok
ok
ok
ok
Remark:
1. You can set up to maximum 10 commands in a MACRO.
2. Make sure all the keys can send out signals, otherwise even if you programmed
these keys inside the MACRO, it still can not work properly when you operate
MACRO function. You can check those keys by pressing them to see the relative
Device
buttons flash or not before you set up MACRO.
3. Make sure the device must have relative conditions when you operate MACRO
function. For example the disc must be put in DVD player and a video tape must
be put in VCR when you like to play DVD or make a record by your VCR.
SET 3S'
10
Macro Function
MACR02
MACR03
Select the device and function key that you like
(eg. TV+POWER+AV,DVD+POWER)
Macro Function
Set up Macro
Macro function let you make sequent operation for your home theater.
You can set up a Macro by following below steps:
1. Press and hold
SET
key for more than 3 seconds, then release it.
2. Press the or key to select
MACRO
in the LCD menu, and then press OK key.
3. Press the or key to select the
MACRO1
in the LCD menu (or
Macro2
or
Macro3), then press OK key.
4. The screen shows SETUP, and then press OK key.
5. You can select the device and function key for a sequent operation that you like.
(e.g.
: TV+POWER+MUTE+AV, DVD+PLAY, VCR+RECORD
, etc. That means you
want turn on the TV and shut off its sound, switch TV input to AV port, at the same
time DVD start to play disc, VCR begins to record )
6. Press
OK
key to save the setting, LCD shows
SUCCESS
then exit to current
setup state,
7. You can press any device key to finish set up or press the
EXIT
key to last state
and use or to select other set up.
Inhaltsverzeichnis
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
