Wisco Industries 621 Bedienungsanleitung
MODEL 621 - CONTROL PANEL ASSEMBLY
0027439SK
FS14130 - REV: ORIG
DESCRIPTION:
This document illustrates how to replace the Control Panel Assembly in your Model 621.
Please review this document thoroughly before beginning repairs. Wisco recommends using qualied local service agents. Wisco does not have authorized service agents.
TOOLS NEEDED
• Pliers (Needle Nose Recommended)
• #2 Phillips Head Screwdriver
PARTS INCLUDED
• (1) 0027439SK - CONTROL PANEL ASSEMBLY KIT
#1 #2
Page 1 of 4
MODEL 621 - CONTROL PANEL ASSEMBLY
0027439SK
FS14130 - REV: ORIG
1.) Remove the Door. (See door removal instrucons)
2.) Remove door gasket. Grab gasket from any corner
and gently pull out to remove.
3.) Remove the ve screws along the boom of the Con-
trol Panel holding it to the Boom Panel.
Page 2 of 4
UNPLUG UNIT FROM OUTLET AND ALLOW TO COOL
MODEL 621 - CONTROL PANEL ASSEMBLY
0027439SK
FS14130 - REV: ORIG
4.)Remove the front eight screws of the Control Panel.
Note the smaller sized screws that are located within the
gasket channel.
Page 3 of 4
5.) Use a pliers to carefully disconnect the ve wire
connecons from the Power Board. (Note Posion of
each wire)
6.) Assemble in reverse order and unit is ready for
operaon.
Wire Connecons:
#1 - Neutral
#2 - Line
#3 - Hi-Limit
#4 - Hi-Limit
#5 - Motor
#2
#1
#3 #4 #5
Andere Handbücher für 621
2
Inhaltsverzeichnis
Andere Wisco Industries Ofen Handbücher
Wisco Industries
Wisco Industries Amore Bedienungsanleitung
Wisco Industries
Wisco Industries 412-5-NCT Bedienungsanleitung
Wisco Industries
Wisco Industries 421 Bedienungsanleitung
Wisco Industries
Wisco Industries 560C Bedienungsanleitung
Wisco Industries
Wisco Industries 620 Bedienungsanleitung
Wisco Industries
Wisco Industries 575 EC Bedienungsanleitung
Wisco Industries
Wisco Industries 560B Bedienungsanleitung
