Wisenet SHD-3000F2 Bedienungsanleitung
In-ceiling Housing
Installation Manual
SHD-3000F2
2_ SHD-3000F2
Overview 3
What’s Included 3
Installation Instructions 4
Installation (indoor type)
4
Product Specifications 8
TABLE OF CONTENTS
SHD-3000F2 _3
ENG
OVERVIEW
This In-CEILING HOUSING is a mounting ADAPTOR that is designed to mount the smart
dome camera in built-in style on a double-layer ceiling.
WHAT’S INCLUDED
HOUSING SAFETY BRACKET (
1EA)
SAFETY WIRE (1SET)
In-ceiling Housing
Installation Manual
SHD-3000F2
TEMPLATE (1EA)
outdoor type (3EA)
indoor type (2EA)
INSTALLATION MANUAL
4_ SHD-3000F2
INSTALLATION INSTRUCTIONS
1. Select an installation position or place that can endure more than 4 times of the total weight
of the installation structure.
2. At least 250mm or more of spare height is required above the CEILING BOARD.
3. CEILING BOARD’s thickness should be less than 40mm.
4. Be sure to secure the SAFETY WIRE to avoid a product fall.
5. If you want to attach the camera to the ADAPTOR, use the only provided SCREWS.
INSTALLATION
(INDOOR TYPE)
1. Place the TEMPLATE on the CEILING BOARD and drill a guided hole.
❶ Remove the round filling (“C”) from the TEMPLATE.
➋ Place TEMPLATE A onto the CEILING BOARD to which you will attach the ceiling
mount ADAPTOR and drill a hole of Ø165mm in diameter.
See the figure below for the hole shape.
250mm 이상일 것
천장보드 40mm 이하일 것
More than 250mm
CEILING BOARD Less than 40mm
Ø165mm
형판
천장 보드
Ø
165
mm
TEMPLATE
CEILING BOARD
SHD-3000F2 _5
ENG
2. Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the
ANCHOR BOLT as below:
❶ Tighten the nut (“N1”) on the ANCHOR BOLT.
➋ Insert the provided SAFETY BRACKET into the ANCHOR BOLT.
➌ Tighten two nuts (“N2”,”N3”) onto the ANCHOR BOLT.
➍ Hook and fix one end of the SAFETY WIRE onto the SAFETY BRACKET.
➎ Hook and fix the other end of SAFETY WIRE onto the HOUSING as shown below.
3. To connect to the camera, insert the external cable through the side hole on the housing
to the inside of the housing as shown in the figure.
M
Refer to the installation manual of the camera that you want to install, and prepare necessary
cables for camera connection.
앙카볼트
천장
너트(N1)
안전브라켓
앙카볼트
너트(N2,N3)
안전와이어
천장
하우징
The ANCHOR BOLTs and nuts are optional and not included in the product package.
ANCHOR BOLT
Nut (N1)
Safety BRACKET
Nut (N2,N3)
SAFETY WIRE
ANCHOR BOLT
HOUSING
CEILING
CEILING
천장
홀하우징
하우징
외부케이블
CEILING
Hole HOUSING
HOUSING
External Cable
6_ SHD-3000F2
4. Push the HOUSING inside the CEILING through the CEILING hole, and tighten the
SCREWs (x2) clockwise to fix the HOUSING on the CEILING.
(The BRACKET will be positioned from <A> to <B> as shown.)
M
Ensure that the HOUSING is firmly secured to the CEILING BOARD.
브라켓
브라켓
<A상태> <B상태>
브라켓
하우징
브라켓
스크류
시계방향으로 회전
5. Remove the dome cover from the camera
BRACKET
SCREW
Turn clockwise
HOUSING
BRACKET
BRACKET
BRACKET
<A> <B>
AC 24V / DC 12V
RESET
VIDEO
F
W
AF
T
N
+ -
AC 24V / DC 12V
RESET
VIDEO
F
W
AF
T
N
+ -
SHD-3000F2 _7
ENG
6. Installing the camera
Using the three screws, mount the camera in the housing.
※
When attaching the camera to the mount, check the arrow directions in the figure below before proceeding.
하우징
천장
AC24V / DC 12V
RESET
VIDEO
F
W
AF
T
N
+ -
AC24V / DC 12V
RESET
VIDEO
F
W
AF
T
N
+ -
CEILING HOUSING
7. install the cover onto the HOUSING.
Assemble the network cable through the
hole on the bottom part of the housing.
PRODUCT SPECIFICATIONS
Item Specifications
Dimension (mm) D194 X H102
Weight 350g
Temperature -10℃ ~ 50℃
Material PC
Color Ivory
Inhaltsverzeichnis
Andere Wisenet Kamerazubehör Handbücher
Wisenet
Wisenet SKY Bedienungsanleitung
Wisenet
Wisenet SHB-9000H Bedienungsanleitung
Wisenet
Wisenet SHD-3000F1 Bedienungsanleitung
Wisenet
Wisenet SHB-4300HP Bedienungsanleitung
Wisenet
Wisenet SHB-4301HP Bedienungsanleitung
Wisenet
Wisenet SHD-3000F4 Bedienungsanleitung
Wisenet
Wisenet SHD-3000F5 Bedienungsanleitung
Wisenet
Wisenet SHB-D-9000H Bedienungsanleitung
