Wizard-tk ON-KS850A Bedienungsanleitung
1
USER MANUAL
MINI CAMERA
2
Please read this user manual carefully and
thoroughly before any attempt to operate this
product and retain it for your future reference.
FEATUERS:
*Innovative Back-Splint design
*360 degrees rotated Clip
*HD 1920*1080P @30FPS
*4 pcs Leds ,support night vision
*Battery standby time is about 6 hours
*Built-in 16/32gb memory card (optional)
*Built-in 800mah battery , 4 hours working
3
DETAILED IMAGES:
Note:This item is without waterproof.
4
OPEARTIONS:
Note: Please charge about 3.5 hours before
using .
The default state of this product is
circularly covering the recorded video,
when the capacity of the memory card
is less than 400MB , the system will
automatically cover the previous
video ,and the file can’t be
recovered .Use this function with
caution
5
1. CHAGRING:
The Mini Camera has an internal battery .The
battery can be charged as following:
Please use the original USB cable , plug the
type-c connector into the camera and the
normal USB plug in your computer ,power
bank ,or use an external 5V 1A Charger.
Charging time is about 3.5 hours.
Note:Red led lights is on while charging , once
full charged , red led turns off.If red led light
blinks 10 times and the camera shuts down,it
means the battery is low .
6
2. POWERING THE CAMERA ON/OFF:
Long press the power button for 3 seconds to
turn on the camera. The blue led will light
up .
Long press on/off button for 3 seconds to turn
off the camera. The blue led will blink 9
times.
Note: The battery standby time is about 6
hours while the camera is on .
7
3. VIDEO RECORDING:
(1)Long press the power button for 3 seconds
to turn on the camera. The blue led will
light up .Press the on/off button to start
recording . The blue led will flash 4 times
before recording.During the recording
led light is off . Press on/off button again
to stop recording . The blue led returns to
blue ( standby state ).
(2)Press on/off button again to start another
recording .
Note:For long time recording ,the video
8
streaming is divided into files each 5 minutes.
4. NIGHT VISION ON/OFF:
To activate night vision mode,make sure that
the camera is on.Quickly twice press the on/
off button , then the blue led will flash one
time and the night vision IR Led is on.
Quickly twice press the on/off button to turn
off night vision. then the red led light will
flash one time and night vision is off.
5. RESETTING THE CAMERA:
When the camera works abnormally, you can
try to reset it.
9
To reset, insert pin to the reset hole,press one
time, the led light will turn off and reset is
done.
Restart the camera , it may be work normally .
Note:Please do not insert the pin to the other
hole.
6. VIDEO REPLAY
Long press power button for 3 seconds to turn
on the camera ,and blue led will light up .
Connect camera to computer or laptop with
the usb cable. Plug type-c connector into the
camera and the normal USB plug into the
10
computer or laptop. A new removable disk will
appear on the computer screen.Open the
removable disk to view the videos .
7. TIME STAPM:
Long press power button for 3 seconds to turn
on the camera.The blue led will light up .
Connect the camera to the computer via USB
cable.The camera will create a “txt” file
(userconfig) in the removable disk . Open the
text “userconfig” file to revise the display
time / date on your video .
The format is :
Inhaltsverzeichnis
Andere Wizard-tk Digitalkamera Handbücher
