wolfappliance.com
|
7
TEPPANYAKI MODULE OPERATION
Teppanyaki Operation
POWER LEVEL
When the heating element is activated, the power level indi-
cator will illuminate indicating the level of heat. The lowest
heat is represented by the small ame, varying levels of heat
by additional indicators, and the highest heat by all indica-
tors including the large ame. Refer to the chart below.
SETTING POWER LEVEL USES
Low 1–3 indicators Keep food warm
Medium 4–5 indicators Fruits and vegetables
Medium High 6-7 indicators Fish, seafood, chicken,
burgers, sausage and grilled
cheese
High 8–10 indicators Diced meats and steaks
POWER LEVEL INDICATOR
Setting controls:
1To activate a heating element, touch for the desired
element (front or rear) on the control panel. The power
level indicator will ash and all indicators for that element
will ash. Refer to the illustration below.
2To complete the activation, touch for highest heat,
for lowest heat, or touch the desired preset power
level indicator.
3To change the heat setting while the element is on, touch
or slide to the desired preset power level.
4To turn the element off, touch .
POWER LEVEL
INDICATOR
Power level indicator.
2-ZONE COOKING
The unit has two cooking zones that can be set indepen-
dently. To set zones independently, verify bridge is not
activated, then adjust the front and rear zones.
SINGLE-ZONE | BRIDGE COOKING
A single cooking zone may be activated, or touch to set
both cooking zones to the same temperature. This provides
a larger cooking surface at a consistent temperature.
Setting controls:
1Touch for the front cooking zone.
2Set desired temperature of the front zone.
3Touch to activate the rear zone at the same tempera-
ture as the front. When bridge is activated, will illumi-
nate on the control panel. To change the temperature
when bridge is activated, touch either zone.
4To return to 2-zone cooking, touch and adjust the
temperature for each zone independently.
PREHEAT
Preheat for approximately 10 minutes before adding food.
Food is cooked directly on the surface.
BRIDGE
Bridge activation.
