Wonwoo Rapport III-Pro Bedienungsanleitung

P/N : 388087140

PRINTED IN KOREA

RapportIII

MultiFunctionalCCTVTester

RAPPORT III / Rev.01/1 Nov.2010

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

MULTI FUNCTIONAL CCTV TESTER

02 MULTI FUNCTIONAL CCTV TESTER

TABLE OF CONTENTS TABLE OF CONTENTS

Symbols

Drawing

..................................................

Information

Before Using Rapport III

Safety Information

Product Introduction

Major functions of Rapport III

Standard item

Introduction

Product Specification

General specification

Meter sepecification

Functional Specification

Power ON/OFF

Mode setup

Video tester

DVR function

Digital multimeter

PTZ controller

UTP cable tester

..................................................

................................

........................

..........................................

.............................................

..........................................

.............................................

.......................................

.....................................

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

Be sure to read through the "Safety Information" section

before using this Rapport III.

This basic instruction manual is for users of the Rapport III . Starting with an

outline of this Rapport III, the manual explains its operation,how it connects to

other devices, how to use the menu buttons,and how it should be operated.

It is highly recommended, even for those who have handled similar devices,

as well as for those using it for the first time, to read all the instructions

thoroughly, especially the precautions, before using the Rapport III.

If there are any questions which arise when using the Rapport III or the unit

is damaged, please contact the supplier of your Rapport III.

Safety Information highlights and explains the precautions which should be

taken, for the safety of Users, when using the Rapport III.

Introduction to the Rapport III, explains the available features and appearance.

Specifications of the Rapport III, explains the specification of the Rapport III.

Functional Use, details the functions of the Rapport III and explains their uses.

General

Rapport

III

is a Portable Service Monitor &

Multimeter with a built-in 3.5 inch digital monitor.

It’s a simple and convenient multi-functional

measurement and test tool which provides

monitoring and analytical data when installing

CCTV systems

Product Functions

Operating Temperature: -10℃~ 50℃

Relative Humidity: 30% ~ 90%

Recharge Voltage: 12V ±10%, 1.2 A or above

Video Input and Output

Multimeter (Voltage and Resistance)

Cable Test (UTP)

PTZ Control

Video Storage Function (DVR, Rapport

III

- PRO)

BEFORE USING RAPPORT III

INFORMATION

04 MULTI FUNCTIONAL CCTV TESTER 05

MULTI FUNCTIONAL CCTV TESTER

*Normal operation: Without using DVR and Multimeter

*The Rapport III and Rapport III Pro support the same basic functions, but the Rapport III does not

include the DVR function.

Precautions

The following describes how to safely operate the

Rapport

III

Please read carefully “the precautions for use of this product” prior to using

this device. Check the input and output ranges of any voltages being applied

to all inputs and outputs of the device, and ensure their connections have been

made properly so no abnormal load is placed on the operation of the device.

If the measurement value is unknown when measuring a resistance, set the

Rapport

III

meter to its maximum value so that no abnormal load is placed

upon the device.

The Rapport

III

should only be used under the environmental conditions shown

in the specification where temperature and humidity figures should be adhered to.

Before using the multimeter

function for circuit testing,

always disconnect all Video

In/Out connections made to

any other external devices.

Connecting the Test Lead Set

to a circuit for testing, with these

connections made, causes

them to use a common

grounding path and could

result in damage to the device.

MONITOR

5 VOLT

DC POWER SUPPLIES

COM +

Precautions

Place fingers behind the protecting pad when using a test probe.

Turn off the power to the circuit under test and discharge all high voltage

capacitance before starting resistance or continuity tests to avoid damage

to the Rapport

III

When using the meter function, do not forget to turn on the power to

the Rapport

III

and use the correct measurement range before connecting

to a circuit to be measured.

Do not measure resistance when power is applied to a circuit.

Do not use the meter function, if the Rapport

III

or the Test Lead

set look damaged.

Do not disassemble the Rapport

III

Do not expose the ports or joints to dirt or liquids.

Avoid areas with strong magnetic or electromotive fields, which can cause

incorrect measurements or operability.

Be mindful not to shock or shake the unit while in use to avoid damage.

Do not touch it with wet hands.

Do not use the unit in damp, humid or gaseous environments.

Pay attention to the following precautions when using

the Rapport

III

06 MULTI FUNCTIONAL CCTV TESTER 07

MULTI FUNCTIONAL CCTV TESTER

SAFETY INFORMATION SAFETY INFORMATION

08 MULTI FUNCTIONAL CCTV TESTER

Precautions

Battery Charging Precautions

The Rapport

III

has a built-in Lithium Polymer Battery.

It can be recharged using a DC12V power adapter with

an output of 1.2A or above and reaches its full charge

after a period in excess of 6 hours. After the battery

has been fully charged for the first 2~3 charging cycles,

it can be used for approximately 6 hours.(Max.8 hrs)

(In normal operation)

The battery can be recharged by connecting it to the

DC adapter, regardless of OSD power, when the slider

switch has been turned on.

The discharge operation starts when the Main Switch is turned on and it then

consumes power from the battery. Therefore, when the Rapport

III

is not

being used for a period of time, make sure the Main Switch is turned off.

Precautions

Battery Handling

Do not charge the battery in ambient temperatures above 40ºC/104ºF

Never short circuit the positive and negative poles of the battery.

Do not disassemble; the battery is not a serviceable item.

Keep away from static electronic fields while using, charging or

when storing.

Stop charging immediately if the battery is overheating, emitting

a burning smell, changed in colour or distorted.

Only use the supplied battery charger or one with a safety guarantee.

Do not immerse the battery in water.

Avoid mechanical shocks to the battery.

Do not bend the tabs are these are breakable.

Do not open the folded edges.

The sealed edge adjacent to the battery contacts is a very sensitive

area; take care not to bend or fold the edges.

The soft packaging can easily be damaged by contact with sharp

surfaces or objects, take care when handling or storing.

Avoid short circuits, as this will cause internal damage to the battery.

MULTI FUNCTIONAL CCTV TESTER

SAFETY INFORMATION SAFETY INFORMATION

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

DVR Function (This funtion is only supported by the Rapport

III

-PRO)

Summary

Designed, with portability and serious CCTV engineers in mind, the Rapport

III

is an advanced piece of video test equipment consisting of many useful test

functions needed to professionally install a CCTV system; test functions include

Video Level, Service Monitor, Multimeter, UTP Test, PTZ Test, RS-422 and

RS-485 Communication Test, etc.

MajorFunctionsofRapport

III

Video Testing

►Tests whether a video image is present, and its quality, by displaying

the image on the built-in 3.5” Digital Monitor

►

►Conducts and displays the Video Level (IRE test) of the image.

►Store the video input on to a SD Card and play it back.

Meter

►Functions for testing voltage, resistance and short circuits.

UTP Cable Testing

►Test the integrity of connection conditions of a Category 5e UTP cable.

Checks for continuity or short circuits.

►Video signal generator Mode : It outputs a Colour Bar which allows the

engineer to test a video monitor or DVR.

Rapport

III

supports both PAL & NTSC video signal format

PTZ Protocol Analyzer

It determines which protocol controls a PTZ camera from a PTZ

Controller or DVR. This helps the CCTV Installer to understand

the protocol and find faulty devices.

StandardItems

Check the contents of your Rapport

III

package against the standard

checklist below :

Tester Carry Bag

10 MULTI FUNCTIONAL CCTV TESTER 11

MULTI FUNCTIONAL CCTV TESTER

PRODUCT INTRODUCTION PRODUCT INTRODUCTION

Rapport

III

Main Test Unit

Rapport III Package

SD Card ( 2Gb Storage ) - (optional, Rapport

III

-PRO)

Test Lead Set ( 1 x Red Lead, 1 x Black Lead )

Rechargeable Lithium Polymer Battery(7.4V 2000mA)

UTP Test Terminal - Dongle

User Manual

Power Adapter (DC12V)

Safety Strap

BNC Video Cable

Rapport III- PRO

Rapport

User’s Manual

Test Lead Set

(Red, Black)

Safety Strap

Power Adaptor

UTP

Tester Termial

BNC Video cable

SD Card

* SD Card is provided to

Rapport III- PRO only.

S D

RAPPORT

Bag

Introduction

12 MULTI FUNCTIONAL CCTV TESTER 13

MULTI FUNCTIONAL CCTV TESTER

PRODUCT INTRODUCTION PRODUCT INTRODUCTION

BNC Video Input

RS-485 In/Out

LED Indicator

Power Input DC12V

Main Power Switch

BNC Video Output

UTP Input

SD Card Slot

PTZ Control Pad

Test Lead Port

LED Indicator

Rapport III (without DVR function)

The Rapport III and Rapport III-Pro support the same basic

functions, but the Rapport III does not include the DVR function.

On charging : RED LED ON

Fully charged: GREEN LED ON

The LED turns Red or Green depend on the recharging status.

When operating the Rapport without an adapter.

On operating: RED LED ON

Low battery : RED LED flickers on and off

Charging

mode

Operating

mode

Power LED

Remark

Item

RED LED

Charging

Fully charged

Charging error

Operating

Low battery

GREEN LED

OFF

Flicker

OFF

Adaptor

connected

Adaptor

disconnected

*This is for power LED status when the power switch is ON.

14 MULTI FUNCTIONAL CCTV TESTER 15

MULTI FUNCTIONAL CCTV TESTER

PRODUCT INTRODUCTION

Part Name Function

LCD TFT LCD

POWER Red LED is on when the OSD POWER is on

Data Transmitting LED Red LED is on when Data is Transmitted

Data Receiving LED Red LED is on when Data is Received

Key Button

Key Button For Controlling External Devices i.e. Rapport III

MODE Button Used to Change Setup

SET Button OSD Selection

OSD Button It toggles OSD & POWER on/off

FAR Button Adjusts PTZ Focus (Far Direction) &

Increases Video Image Brightness

NEAR Button Adjusts PTZ Focus (Near Direction) &

Decreases Video Image Brightness

TELE Button Zooms PTZ (Zoom In) &

Increases Video Image Contrast

WIDE Button Zooms PTZ (Zoom Out) &

Decreases Video Image Contrast

Shift Setup Button Moves PTZ Up, Down, Right, Left &

Also Used for Menu Functions

METER

Voltage Button Measures Voltage

Resistance Button Measures Resistance

Setup Change Button Changes setup Between AC & DC, Resistance/continuity Test

Record Video (Rapport

III-

PRO)

Image data list for SD card (Rapport

III

-PRO)

Playback Recoded Video (Rapport

III

-PRO)

Test Lead Connection Positions

Position of Black Test Lead, Common Ground(-ve)

Position of Red test Lead for Measuring

Voltage & Resistance(+ve)

①

②

③

④

⑥

⑤

⑦

FILE

REC

PLAY

Test Lead Connection

FILE

MODE

SET

TELE

WIDE

OSD

PWR

CLEAR

AC DC

/ /

OPEN

REC

PLAY

COM

PRODUCT INTRODUCTION

Rapport III-Pro

Part Name Function

LCD TFT LCD

POWER Red LED is on when the OSD POWER is on

Data Transmitting LED Red LED is on when Data is Transmitted

Data Receiving LED Red LED is on when Data is Received

Key Button

Key Button For Controlling External Devices i.e. Rapport

III

MODE Button Used to Change Setup

SET Button OSD Selection

OSD Button It toggles OSD & POWER on/off

FAR Button Adjusts PTZ Focus (Far Direction) &

Increases Video Image Brightness

NEAR Button Adjusts PTZ Focus (Near Direction) &

Decreases Video Image Brightness

TELE Button Zooms PTZ (Zoom In) &

Increases Video Image Contrast

WIDE Button Zooms PTZ (Zoom Out) &

Decreases Video Image Contrast

Shift Setup Button Moves PTZ Up, Down, Right, Left &

Also Used for Menu Functions

METER

Voltage Button Measures Voltage

Resistance Button Measures Resistance

Setup Change Button Changes setup Between AC & DC, Resistance/continuity Test

Measures Video Level

Test Lead Connection Positions

Position of Black Test Lead, Common Ground(-ve)

Position of Red test Lead for Measuring

Voltage & Resistance(+ve)

①

②

③

④

⑥

⑤

⑦

IRE

Test Lead Connection

IRE

MODE

SET

TELE

WIDE

OSD

PWR

AC DC

/ /

OPEN

COM

Rapport III

NEAR

FAR

NEAR

FAR

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

SD Card Slot (Rapport III-PRO)

③

④

②

①

Part Name Function

①

②

③

④

DC Power Jack DC Power Input Jack (DC12V, 1.2A)

Power Switch ON/OFF Main Power Switch

UTP RJ45 Jack Test Jack for UTP cable

SD Card

①

④

② ③

Part Name Function

Input BNC Input for External Video signal

Output BNC Outputs the Screen Displayed on the Rapport III,

or the Internally Generated Video Test Signals

Communication

Port

Connections for RS422 and RS485

Input & Output (Rx+, RX-, TX+, Tx-)

Safety Strap Used to Carry the Rapport III Safely

①

②

③

④

16 MULTI FUNCTIONAL CCTV TESTER 17

MULTI FUNCTIONAL CCTV TESTER

PRODUCT INTRODUCTION PRODUCT INTRODUCTION

GeneralSpecification MeterSpecification

Mode Range Minimum

Measuring Accuracy

DC Voltage

400mV 100uV

4V 1mV

40V 10mV

300V 100mV

AC Voltage

4V 1mV

40V 10mV

300V 100mV

Resistance

400Ω 0.1Ω

4㏀1Ω

40㏀10Ω

400㏀100Ω

4㏀1㏀

40㏀10㏀

Continuity Beeper is activated when the resistance is below 80Ω

±(2.5% +4dgts)

±(2.0% +4dgts)

±(2.0% +2dgts)

±(2.0% +4dgts)

±(3.0% +5dgts)

(40㎐~ 500㎐)

Electrical

Characteristics

Input Voltage 12V ±10%, above 1.2A

Battery Lithium Polymer Battery

(Inner packaging)

Built-in Charger

Charging Time More than 6 hrs

Operation Time More than 6 hrs

(Max.8hrs)

Image

TV Type NTSC/PAL

Image level 1Vpp, 140 IRE

PTZ

Operation Test

Protocol Multi

Transmission

Speed

Mode RS-422, RS-485

2400bps ~ 115.2Kbps

UTP Cable

Test Tests Continuity/Crossed Cable, and Breaks or

Short-Circuit

Size W(88mm) X L(126mm) X D(40mm)

18 MULTI FUNCTIONAL CCTV TESTER 19

MULTI FUNCTIONAL CCTV TESTER

PRODUCT SPECIFICATION PRODUCT SPECIFICATION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Wonwoo Prüfgeräte Handbücher

Wonwoo

Wonwoo Rapport mini HD Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung