woodmizer E10 Leitfaden
E10 Motor
Safety, Operation, Maintenance
& Parts Manual
LT15 rev. E2.00 - E8.13
LT15W rev. A1.00 - A1.14
Safety is our #1 concern! Read and understand
all safety information and instructions before oper-
ating, setting up or maintaining this machine.
April 2010
Form #1100
©2019
Printed in the United States of America, all rights reserved. No part of this manual may be
reproduced in any form by any photographic, electronic, mechanical or other means or used in
any information storage and retrieval system without written permission from
Wood-Mizer
8180 West 10th Street
Indianapolis, Indiana 46214
&DOLIRUQLD
3URSRVLWLRQ:DUQLQJ
:$51,1*%UHDWKLQJJDVGLHVHOHQJLQHH[KDXVWH[SRVHV\RXWRFKHPLFDOVNQRZQWR
WKH6WDWHRI&DOLIRUQLDWRFDXVHFDQFHUDQGELUWKGHIHFWVRURWKHUUHSURGXFWLYHKDUP
$OZD\VVWDUWDQGRSHUDWHWKHHQJLQHLQDZHOOYHQWLODWHGDUHD
,ILQDQHQFORVHGDUHDYHQWWKHH[KDXVWWRWKHRXWVLGH
'RQRWPRGLI\RUWDPSHUZLWKWKHH[KDXVWV\VWHP
'RQRWLGOHWKHHQJLQHH[FHSWDVQHFHVVDU\
)RUPRUHLQIRUPDWLRQJRWRZZZ3ZDUQLQJVFDJRY
:$51,1*'ULOOLQJVDZLQJVDQGLQJRUPDFKLQLQJZRRGSURGXFWVFDQH[SRVH\RXWR
ZRRGGXVWDVXEVWDQFHNQRZQWRWKH6WDWHRI&DOLIRUQLDWRFDXVHFDQFHU$YRLGLQKDOLQJ
ZRRGGXVWRUXVHDGXVWPDVNRURWKHUVDIHJXDUGVIRUSHUVRQDOSURWHFWLRQ
)RUPRUHLQIRUPDWLRQJRWRZZZ3:DUQLQJVFDJRYZRRG
Table of Contents Section-Page
Table of Contents WMdoc072619 iii
TOC
SECTION 1 ABOUT THIS MANUAL 1-1
SECTION 2 OPERATION 2-1
2.1 Starting The Motor .................................................................................2-1
SECTION 3 MAINTENANCE 3-1
3.1 Safety......................................................................................................3-1
SECTION 4 REPLACEMENT PARTS 4-1
4.1 Motor Starter Assembly .........................................................................4-1
LT15 Rev. E6.06+
4.2 Motor Starter Assembly .........................................................................4-3
LT15 Rev. E6.00 - E6.05
4.3 Motor Starter Assembly .........................................................................4-5
LT15 Rev. E2.00 - E5.00
4.4 Motor Assembly .....................................................................................4-7
4.5 Throttle/Clutch Assembly ......................................................................4-8
LT15 E10 Rev. E1.00+
INDEX I
About This Manual
1
1-1 WMdoc072619 About This Manual
SECTION 1 ABOUT THIS MANUAL
This manual is provided as a supplement to the equipment manufacturer’s manuals. This
manual provides information specific to the use of this equipment on the Wood-Mizer®
sawmill. Refer to the sawmill operator’s manual and manufacturer's manual before
attempting to operate this equipment.
IMPORTANT! Read the sawmill operator’s manual and engine manu-
facturer’s manual for instructions and safety precautions before oper-
ating this equipment.
The information and instructions given in this manual do not amend or extend the limited
warranties for the equipment given at the time of purchase.
Operation
Starting The Motor
Operation WMdoc072619 2-1
2
SECTION 2 OPERATION
2.1 Starting The Motor
DANGER! Ensure the blade is disengaged and all persons are out of
the path of the blade before starting. Failure to do so will result in death
or serious injury.
Turn the main switch on the starter box to the ON position.
Press the green START button located on the starter box to start the motor.
MOTOR SHUTOFF
Press the red STOP button on the starter box to stop the motor.
Turn the main switch to the OFF position.
Maintenance
Safety
3
3-1 WMdoc072619 Maintenance
SECTION 3 MAINTENANCE
Refer to the manufacturer’s manual for maintenance intervals and procedures unless oth-
erwise instructed in this manual. Follow the manufacturer’s recommendations for dusty
conditions.
IMPORTANT! This manual only provides information about additional
procedures or procedures to be performed at different time intervals
than found in the manufacturer's manuals. Refer to the manufacturer's
manual for complete maintenance instructions.
WARNING! Clean sawdust from all guards, vents, control
boxes, or any area where sawdust may gather after every
shift. Failure to do so may result in fire, causing death or
serious injury.
3.1 Safety
Use caution when performing maintenance or service to the motor.
DANGER! Always be aware of and take proper protective measures
against rotating shafts, pulleys, fans, etc. Always stay a safe distance
from rotating members and make sure that loose clothing or long hair
does not engage rotating members resulting in possible injury.
DANGER! Make sure all electrical installation, service and/or mainte-
nance work is performed by a qualified electrician and is in accordance
with applicable electrical codes.
DANGER! Hazardous voltage inside the electric sawmill disconnect
box, starter box, and at the motor can cause shock, burns, or death.
Disconnect and lock out power supply before servicing! Keep all elec-
trical component covers closed and securely fastened during mill oper-
ation.
WARNING! Remove the blade before performing any engine service.
Failure to do so may result in serious injury.
WARNING! Always wear proper and necessary safety equipment
when performing service functions. Proper safety equipment includes
eye protection, breathing protection, hand protection and foot protec-
tion.
Maintenance
Safety
Maintenance WMdoc072619 3-2
3
This symbol identifies the interval (hours of operation) at which each maintenance pro-
cedure should be performed. "AR" signifies maintenance procedures which should be
performed as required.
0
Replacement Parts
Motor Starter Assembly
4
3-1 E1001doc072619 Replacement Parts
E10
SECTION 4 REPLACEMENT PARTS
4.1 Motor Starter Assembly
LT15 Rev. E6.06+
HAZARDOUS VOLTAGE
Hazardous voltage inside disconnect box,
starter box, and at electric motor can cause
shock, burns, or death. Disconnect and lock
out power supply before servicing! Keep all
electrical component covers closed and
securely fastened during machine
operation.
Failure to do so will result in severe
personal injury.
Wood-Mizer Products, Inc.
800-525-8100 Reorder #S20061
1
14
15
16
7
13
11
2
5
6
4
10
8
150178-1
3
9
12
17
Replacement Parts
Motor Starter Assembly
Replacement Parts E1001doc072619 3-2
4
E10
REF DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY.
MOTOR MODULE, 10HP 3-PHASE 208-240V ELECTRIC MOTOR 017954 1
MOTOR MODULE, 10HP 3-PHASE 380-500V ELECTRIC MOTOR 017955 1
Motor Parts (See Section 4.4)
Control Assembly, LT15 E10 3-Phase 240V 053713 1
Control Assembly, LT15 E10 3-Phase 460V 053738 1
1Bolt, 5/16-18 x 3/4 Hex Head F05006-5 4
2Bracket, Front Electric Motor Mount 035991 1
3Bracket, Rear Electric Motor Mount 035992 1
4Enclosure, 16” x 16” x 8” Custom 053584 1
LT15E10L Electrical Components (See Component List)
LT15E10H Electrical Components (See Component List)
5Washer, 5/16 Flat F05011-16 4
6Nut, 5/16-18 Keps F05010-20 4
7Harness Assembly, LT15E10L Blade Motor (3-Phase 240V) 053714 1
Harness Assembly, LT15E10H Blade Motor (3-Phase 460V) 053739 1
8Decal, Electrical Hazard Danger S20061 1
9Decal, LT15E10 Control Cabinet 069362 1
10 TUBE WELDMENT, WIRE HANGER LT15E 034906 1
11 MOUNT WELDMENT, BATTERY/CONTROL BOX 034899 1
12 BOLT, 5/16-18 X 3/4” HEX HEAD F05006-102 4
13 NUT, 5/16-18 NYLON LOCK F05010-58 4
14 BOLT, 3/8-16 X 1” HEX HEAD F05007-7 3
15 WASHER, 3/8” SPLIT LOCK F05011-4 3
16 WASHER, 3/8” SAE FLAT F05011-3 3
17 CLAMP, 1” EMT P05436 1
Replacement Parts
Motor Starter Assembly
4
3-3 E1001doc072619 Replacement Parts
E10
4.2 Motor Starter Assembly
LT15 Rev. E6.00 - E6.05
REF DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY.
1 MOUNT WELDMENT, BATTERY/CONTROL BOX 034899 1
2 WASHER, 3/8 FLAT F05011-3 3
3 WASHER, 3/8 SPLIT LOCK F05011-4 3
4 BOLT, 3/8-16 X 1 HEX HEAD F05007-7 3
5 BOLT, 5/16-18 X 3/4 HEX HEAD F05006-102 4
HAZARDOUS VOLTAGE
Hazardous voltage inside disconnect box,
starter box, and at electric motor can cause
shock, burns, or death. Disconnect and lock
out power supply before servicing! Keep all
electrical component covers closed and
securely fastened during machine
operation.
Failure to do so will result in severe
personal injury.
Wood-Mizer Products, Inc.
800-525-8100 Reorder #S20061
STOP!
Read and understand operator’s
manual and all safety
instructions before setting up,
operating or maintaining this
machine.
Failure to do so may result in
injury, death or equipment
damage.
Wood-Mi zer Products , Inc.
800-525-8100 Reorder #016402
STOP!
Always wear eye, ear,
respiration and foot
protection when
operating this machine.
Failure to do so may
result i n injury.
Wood-Mizer Products, Inc.
800-525-8100 Reorder #S11753
1
23
4
5
6
7
8
9
10
11
12
16
13
14
15
150150-2
Andere Handbücher für E10
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere woodmizer Industrieanlagen Handbücher
woodmizer
woodmizer PD200G19-S Leitfaden
woodmizer
woodmizer HR250 Bedienungsanleitung
woodmizer
woodmizer LT70H AH Bedienungsanleitung
woodmizer
woodmizer MP360 E16S Bedienungsanleitung
woodmizer
woodmizer LT40HD-R Bedienungsanleitung
woodmizer
woodmizer LMS-HPR Einrichtungshandbuch
woodmizer
woodmizer LT70 Series Leitfaden
woodmizer
woodmizer LT30HD Leitfaden
woodmizer
woodmizer PD200 Series Leitfaden
woodmizer
woodmizer LT30 Bedienungsanleitung
woodmizer
woodmizer OS96 Leitfaden
woodmizer
woodmizer BMT200 Leitfaden
woodmizer
woodmizer CBT-430 Leitfaden
woodmizer
woodmizer LT15 AL-KO Bedienungsanleitung
woodmizer
woodmizer LT15SA Bedienungsanleitung
woodmizer
woodmizer 4015X5 Leitfaden
woodmizer
woodmizer TVS-FT Series Bedienungsanleitung
woodmizer
woodmizer BMT300 Leitfaden
woodmizer
woodmizer BMT100-2 Leitfaden
woodmizer
woodmizer LASTEC 621ER Handbuch
