Woohlab Echo Show Series Bedienungsanleitung
Galaxy Projector
User Manual
Product Usage Video
Connect the included power cable to the power port on the device. Plug the opposite end into a
power outlet.When plugged into an outlet, the ambient light on both sides of the projector will
briefly illuminate.
Press the Power button to turn on the projector. Once the device is powered on for the first time,
the ambient lights on both sides will gradually light up one by one until they are fully lit. A projec-
tion of pulsating stars will then appear along with slowly rotating clouds.
Directions for Use
Download the Woohlab mobile app on your smartphone and create an account.
IOS: Download the Woohlab app on App Store.
Andorid: Download the Woohlab app on Google Play.
Follow the steps in the Woohlab app to connect your device.
Your phone’s Bluetooth must be turned on in order to find and properly connect to the galaxy
projector.
Step 1 Step 2 Step 3
Available on the
App Store
ANDROID APP ON
play
Step 4 Step 5 Step 6
Notes:
(1)If you can’t connect your phone to the projector, press and hold the power button on the device.
Continue holding while the ambient lights on both sides flash 3 times and then illuminate for 2-3
seconds before powering down.This will reset the Bluetooth pairing setting.
Next, tap“Try Again”on the Woohlab app try to connect again.
(2)When connecting to Wi-Fi, be sure you’re connecting to a 2.4 GHz network. (5GHz is not support-
ed.) When prompted, enter the correct Wi-Fi password to connect.
If you don't want to connect to Wi-Fi during the initial setup, you can choose to skip it.Wi-Fi con-
nections can be established later in the settings section of the app.
Power Button
Press the Power button to power
on /off the device.
Mode Button
Press the Mode button to change light effects.
Rhythm Button
Press the Rhythm button to enable music rhythm mode.When the device is placed next to a music
player, the light effects will follow the beat of any audible music.
Press the power button to exit music rhythm mode.
Music Rhythm Indicator
When the music rhythm function is turned on,the timer indicator will light up.
Microphone
In the music rhythm mode, the built-in microphone will collect sound signals from music played
nearby.The device will then display light effects according to the rhythm of the music.
BUTTON CONTROLS
Power button
Rhythm Button Timer Button
Brightness Button
Reset Hole
Microphone
Type C Port
Mode Button
Music Rhythm Indicator Timer Indicator
Timer Button
When the Timer button is pressed, the star projector will automatically turn off after 1 hour.You can
also modify the default timing setting (1 hour) in the Woohlab app.
Brightness Button
Adjust the brightness of pattern lights, laser lights and ambient lights.Three brightness levels are
available: 30% - 60% - 100%.
Timer Indicator
When the timer function is turned on, the timer indicator will light up.
Reset Hole
Insert a paperclip into the hole and press and hold the button for 5 seconds.The ambient light on
both sides will flash green 5 times and then illuminate green for 2-3 seconds before powering
down.This will restore the device to factory settings.
Replace the pattern drawer
Try changing the pattern for different projection effects.
Replace the pattern drawer
Right ambient light
Star Projector base
Pattern light
Left ambient light
Laser light
On/Off Button
Slide the On/Off Button to
turn the pattern light on or
off.
Pattern Light Color Setting
The pattern light contains
two LEDs (A & B).
So you can choose any light
color from the Color Wheel
and Color Sliders options.
Brightness
0-100% adjustable.
Sliders
Color Sliders
R: Red Color
G: Green Color
B: Blue Color
W: White Color
Rotational Speed
0-100% adjustable.
Mode:
3 pattern light modes are available: Static, Breathe and
Gradient.The Breathe and Gradient mode options can be
customized with up to 8 different color combinations.
Choose any light color from
the Color Wheel by dragging
the A and B icons.
Color Wheel
Drag the RGBW color bar
of the Color Sliders to
select a color combination.
APP CONTROL FUNCTIONS
Brightness
0-100% adjustable.
Multiple music rhythm
modes are available,
and the sensitivity can be
adjusted right in the
Woohlab app.
When the projector is
placed next to a music
player,
the light effects will follow
the beat of any audible
music.
On/Off Button
Slide the On/Off Button to turn
the ambient lights on or off.
Theme：Choose from one of multiple
colors themes.
DIY Colors：The ambient lights on both sides
of the projector have a total of 6
LEDs. Each LED can be custom-
ized to display a different color.
Brightness
0-100% adjustable.
On/Off Button
Slide the On/Off Button
to turn the laser light on
or off.
Mode
2 laser light modes are
available: Static and
Breathe.
You can save the currently settings of Pattern / Laser / Ambient lights to Scenes - My favorite.
Here, you can adjust the timer setting.
For example, if you select “1 hour”and then“Save,”
the timer indicator on the device will light up, and
the galaxy projector will automatically turn off
after 1 hour.
OTHER FUNCTIONS
You can customize the start and end times of the device by creating a program.
The customized programs you’ve created are available in Scenes - My favorite.
Select the Scenes icon to choose different light effects.
Two options are available: Basic (factory-set light effects) and My Favorites (light effects custom-
ized by you).
Manage your woohlab galaxy projector with simple voice commands via Alexa smart speaker.
First, power on the device, and you can say "Alexa, discover devices"
Dieses Handbuch passt für folgende Modelle
19
Inhaltsverzeichnis
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
