Worlde PANDAMINI Referenzhandbuch
USB MIDI CONTROLLER INTRODUCTION
This is an ultra-compact and light-
weight MIDI controller which serves to control music software. It is equipped with
velocity-sensitive keys, and 8 velocity-sensitive drum pads as well as 4
faders and 4 rotary controls.
both PC and Mac(OTG convertor cable is required for connecting to Mobile phone and Pad)
. You can do without a bulky power
adapter as power supply is via the USB bus. The unit is supplied with a software editor which
you can
website.
The software editor will let you customize this USB MIDI controller to your own requirements. It’s
download the full user manual and other setting instructions from http://en.worlde.com.cn/.
3 STEPS FOR PANDAMINI TO WORK
1) Connect your PANDAMINI to the computer by USB cable.
2) Download the software editor from the download page of WORLDE website and customize
all editable controllers, and create,
save and load presets.
3) Open your DAW in your computer
and select PANDAMINI as your hardware controller in your DAW.
CONNECTING A COMPUTER
Use the included USB cable to connect the USB MIDI controller to a
USB2.0 port on your computer. The power will turn on and the scene
LED will light up. Select the PANDAMINI as MIDI controller within your
music software and you are ready to go.
FIRST STEPS WITH THE EDITOR
The editor will let you customize all editable controllers, and create,
save and load presets. Make sure to download the software editor
from http://en.worlde.com.cn/. Always connect the PANDAMINI
to your computer before opening the editor.
After opening the editor, click the control you would like to modify
and edit its assignments in the lower right pane in the main screen.
In order for your adjustments to be reflected in your MIDI controller
you will need to write the data into the controller. For this, select
Communication > Send Scene Data from the top menu bar. Make sure
your DAW is not open when software editor is used or it will fail to
send the data to PANDAMINI.
DEVICE SETUP IN SOFTWARE
To select PANDAMINI as a controller for your digital audio workstation (DAW):
1. Connect PANDAMINI to your computer using a standard USB cable. (If you are connecting
PANDAMINI
make sure it is a powered hub. If another device with USB3.0 is connect
ed to USB hub at the same time,
will not work properly at this time.)
2. Open your DAW(make sure the software editor is closed before open the DAW).
3. Open your DAW's Preferences, Options, or Device Setup, select PANDAMINI
as your hardware controller, and then close
that window. Your PANDAMINI is now able to communicate with your software.
For more info of mapping setting of PANDAMINI to DAW, please visit the download page of
http://en.worlde.com.cn/
SYSTEM REQUIREMENTS
Windows 10/8/7/XP/Vista
Mac OS X 10.3.9 and better
All information is subject to change without prior notice.
Important: Visit http://en.worlde.com.cn/
to download the complete User Guide and Software application Mapping Setting Instructions.
weight MIDI controller which serves to control music software. It is equipped with
25
faders and 4 rotary controls.
The controller connects
. You can do without a bulky power
you can
download from WORLDE
The software editor will let you customize this USB MIDI controller to your own requirements. It’s
also available to
all editable controllers, and create,
and select PANDAMINI as your hardware controller in your DAW.
Now you are ready to go.
PANDAMINI
to a USB hub,
ed to USB hub at the same time,
PANDAMINI
as your hardware controller, and then close
http://en.worlde.com.cn/
to download the complete User Guide and Software application Mapping Setting Instructions.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The LEDs does
not light up No power
Please make sure that the PANDAMINI is connected to
your computer by the USB cable and the computer is
powered on. Sometimes change another USB cable or
computer is needed to make sure if the USB cable is
working fine.
No sound from
PANDAMINI
The PANDAMINI is MIDI-controller,
which means that it does not contain
any sounds inside.
Please make sure that the PANDAMINI is connected to
your computer or hardware sound module.
No sound from target
device
PANDAMINI is not properly
connected.
Check your computer’s USB connection to confirm that
the PANDAMINI is recognized. If necessary, replug the
connection and restart your computer.
PANDAMINI connected after
software application has started.
If controlling an external hardware module, make sure
that it’s a USB Host supporting device.
Problem is caused by use of a USB
hub.
Unplug the PANDAMINI from the USB hub and connect
directly to your computer.
Software application not set to
receive MIDI data from the
PANDAMINI.
Ensure that the PANDAMINI or “USB” MIDI device is
listed as an active MIDI source in your application.
Usually, the MIDI settings can be accessed through the
application’s Preferences menu.
PANDAMINI’s MIDI channel is not
the same as application’s incoming
MIDI channel.
Make sure that the PANDAMINI is sending MIDI
information on the channel that the target device
expects.
Keys/Pads/Knobs/Sliders
not working
Keys/Pads/Knobs/Sliders not set to
mapping to your DAW.
Make sure you have set the PANDAMINI to mapping to
your DAW manually. For more mapping info please visit
the download page of WORLDE website.
Drivers fail to install Computer’s got some problem on
USB port.
PANDAMINI is driver free device, so basically no driver is
required for this device. Please try to use the PANDAMINI
on another USB port or even on another computer.
PANDAMINI fails to
connect to computer Fail to connect to computer. Check your computer’s USB connection to confirm that
the PANDAMINI is recognized.
RGB pads colors can’t be
changed
Software editor is not used
properly.
Use the software editor to change the RGB colors of the
pads.
PANDAMINI is not working
properly with Software
applications
Mapping Settings for PANDAMINI
to Software application is not
finished.
The PANDAMINI is compatible with any software(Such as
Cubase, FL Studio, Bitwig, Ableton Live, Logic Pro and so
on) which supports the MIDI protocol. Please consult
your specific hardware or software device’s
documentation for instructions on enabling the
PANDAMINI as a MIDI input device.
CC No. of the Knobs,
Sliders, Pads can’t be
changed
Software editor is not used
properly.
Use the software editor to change the CC No. of the
Knobs, Sliders, and pads.
Andere Worlde Controller Handbücher
