Worx WX126 Bedienungsanleitung
P06
P14
EN
D
Lithium-Ion cordless drill/driver
Lithium-lonen-Akku-Bohrschrauber
WX126 WX126.3
Original instructions EN
Übersetzung der Originalanleitung D
123
4
5
6
7
8
LOCK
UNLOCK
A B C
D
G
E F
6
Lithium-Ion cordless drill/driver EN
1. DETACHABLE KEYLESS CHUCK
2. TORQUE ADJUSTMENT RING
3. TWO-SPEED GEAR CONTROL
4. FORWARD/REVERSE ROTATION CONTROL
5. SOFT GRIP HANDLE
6. BATTERY PACK *
7. BATTERY PACK RELEASE BUTTON
8. ON/OFF SWITCH
9. LED LIGHT (See Fig. G)
* Not all the accessories illustrated or described are included in standard delivery.
7
Lithium-Ion cordless drill/driver EN
TECHNICAL DATA
Type WX126 WX126.3 (1-designation of machinery, representative of Drills)
Voltage 12 V
No load speed 0-350 / 0-1300/min
Number of clutch positions 15+1
Max torque (soft/hard) 14/24N.m
Chuck capacity 10mm
Max. drilling capacity Steel 10mm
Wood 20mm
Machine weight 1.1kg
NOISE INFORMATION
A weighted sound pressure LpA:73dB(A)
A weighted sound power LwA:84dB(A)
KpA&KwA 3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Drilling into metal Vibration emission value ah=1.24m/s2
Uncertainty K=1.5m/s2
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
8
Lithium-Ion cordless drill/driver EN
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job.This may significantly
reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 100C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
WX126 WX126.3
1.3 Ah lithium battery pack 1 1
Charger 3hr 30min
Bits 2 2
We recommend that you purchase your accessories from the same store that sold you the
tool. Use good quality accessories marked with a well-known brand name. Choose the type
according to the work you intend to undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
9
Lithium-Ion cordless drill/driver EN
ADDITIONAL SAFETY
RULES FOR YOUR
CORDLESS DRILL
1. Remove the battery pack from the drill
before carrying out adjustments.
2. Do not expose to rain or water.
3. Do not store the battery pack in
temperatures over 40oC.
4. Always charge the battery pack between
temperatures 0oC to 30oC. Ideal charging
temperature is 18oC to 24oC.
5. Only use the charger and the battery pack
provided no others.
6. Avoid short circuit of the battery pack
connections (screws & nails).
7. Do not incinerate or burn the battery pack,
it may explode.
8. Do not charge a damaged battery pack.
9. Replace any damaged supply cords on
your charger.
10.Always disconnect the charger power
supply before making or breaking the
connections to the battery pack.
11. Battery pack and charger will be warm
during charging this is normal.
12.When not in use, remove a charged battery
pack from the charger.
13.Always remove the battery pack from the
charger immediately after re-charging is
completed.
14.Your drill and battery pack will be warm
when working, this is normal.
15.Do not dispose of batteries in fire, or
with household waste. Return exhausted
batteries to your local collection or
recycling point.
16.Always check walls, floors and ceilings for
hidden power cables and pipes.
1 7. Use auxiliary handle(s), if supplied
with the tool. Loss of control can cause
personal injury.
18.Accessories and metal parts can become
very hot.
19.Hold power tool by insulated gripping
surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring. Cutting
accessory contacting a “live” wire may
make exposed metal parts of the power
tool “live” and could give the operator an
electric shock.
WARNING: If a small amount
of electrolyte should leak from
the battery pack under extremes of
temperature or after heavy use, then
wash off immediately from your skin and
hands using clean water. For eye contact,
rinse thoroughly with clean water and seek
medical treatment immediately.
10
Lithium-Ion cordless drill/driver EN
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Indoor use only
Do not expose to rain or water
Do not burn
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point
Li
SYMBOLS OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for driving in and
loosening screws as well as for drilling in
wood, metal and plastic.
BEFORE PUTTING INTO OPERATION
A) CHARGING THE BATTERY
The battery charger supplied is matched to the
Li-ion battery installed in the machine. Do not
use another battery charger.
The Li-ion battery is protected against deep
discharging. When the battery is empty,
the machine is switched off by means of a
protective circuit:The tool holder no longer
rotates.
In a warm environment or after heavy use, the
battery pack may become too hot to permit
charging. Allow time for the battery to cool
down before recharging.
When the battery pack is charged for the first
time and after prolonged storage, the battery
pack will accept a 100% charge after several
charge and discharge cycles.
B) TO REMOVE OR INSTALL BATTERY
PACK
(See A)
Depress the battery pack release button to
release and slide the battery pack out from
your tool. After recharge, slide it back into your
tool. A simple push and slight pressure will be
sufficient.
OPERATION
1. REMOVING AND MOUNTING CHUCK
(See B)
To remove the chuck, first rotate the rear
sleeve in clockwise direction, then pull the
chuck off toward the front.
To mount the chuck, first insert the spindle
into the chuck, then rotate the rear sleeve in
anticlockwise direction.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Worx Akku-Bohrschrauber Handbücher
