Worx WX092 Installationshandbuch

WX092

WX092.X

20V Multi-Function

Inflator

SAFETY AND OPERATING MANUAL

20V Multi-Function

Inflator

WX092

WX092.X

PRODUCT SAFETY

GENERAL SAFETY WARNINGS

WARNING Read all

safety warnings and all

instructions. Failure to follow

the warnings and instructions

may result in electric shock,

fire and/or serious injury.

Save all warnings and

instructions for future

reference.

- This appliance is not

intended for use by persons

(including children) with

reduced physical, sensory

or mental capabilities,

or lack of experience

and knowledge, unless

they have been given

supervision or instruction

concerning use of the

appliance by a person

responsible for their safety.

- Children should be

supervised to ensure that

they do not play with the

appliance.

ADDITIONAL SAFETY RULES

FOR CORDLESS AIR PUMP

1. Avoid using the pump at

temperatures below -25 oC

or above 45 oC

2. Never leave the pump

unsupervised while it is in

use.

3. Ensure that the ON/OFF

switch is turned off when

connecting to the power

source.

4. Caution! Operate the pump

only for a short time. Under

the high working pressure

of 8 bar (120 psi),The

appliance may overheat if

operated continuously for

longer than 2.5 minutes.

Switch the appliance off

immediately and allow it to

cool down for at least 7.5

minutes

5. Risk of injury! Do not pump

any objects up to more than

the intended pressure. They

could burst and cause injury

and/or material damage

6. Do not exceed the

permissible output range

of the pump. Do not pump

up any lorry, tractor or other

large tires

7. Do not work with any

materials that are or could

be easily inflammable or

explosive.

8. Never use the pump and

accessories for purposes

other than the ones for

which it was designed

9. The pump must be

20V Multi-Function

Inflator WX092

WX092.X

protected from moisture.

10.Before each use, check

the device. If damage

is detected, do not use

the device. Have repairs

performed only by a queried

technician. Never open the

device yourself.

11.The device produces a high

pressure. Do not direct

the air outlet at persons or

animals.

12.Remain alert at all times!

Never use the appliance

when you are distracted or

do not feel well

13.High pressure air could

result in death or serious

injury. Never operate

above maximum operating

pressure. Do not operate

with pressure switch or

safety valve set above

maximum allowable

working pressure.

14.Inhalation hazard. Using

pump to supply breathing

air could result in death or

serious injury. Do not use

pump to supply breathing

air.

15.The equipment and

packaging material are not

toys. Do not let children

play with plastic bags, foils

or small parts. There is a

danger of swallowing or

suffocating.

SAFETY WARNING FOR LED

LAMP

WARNING:The LED

lamp equipped with

power tool is in the Exempt

Group. In order to avoid the

viewer-related risk, operator

shall be more careful and read

all safety warnings and all

instructions. Failure to follow

the warnings and instructions

may result in optical injuries.

How to avoid exposure

hazard

With increasing distance from

a lamp the applicable hazard

values decrease - see Figure 1.

At the distance X1, EHV = 1, i.e.

the EHV equals the applicable

emission limit value. Distance

X1 is the hazard distance

(HD) for this lamp system.

At distance X2, the optical

radiation hazard value exceeds

the applicable emission limit

value by a factor of A. At this

distance, excessive exposure

to optical radiation may be

reduced either by restricting

exposure time by a factor of A

(if the emission limit values are

expressed in terms of radiant

20V Multi-Function

Inflator

WX092

WX092.X

exposure or time integrated

radiance), or by using

engineering controls (such

as filters) which attenuate

the accessible emission and/

or personal protective means

(such as eyewear, clothing)

which would limit the potential

exposure to the emitted

energy.

Figure 1 – Example of

graphic presentation of

distant dependent emission

hazard values

SAFETY WARNINGS FOR

BATTERY PACK

a) Do not dismantle, open

or shred cells or battery

pack.

b)Do not short-circuit a

battery pack. Do not

store battery packs

haphazardly in a box or

drawer where they may

short-circuit each other

or be short-circuited by

conductive materials.

When battery pack is not

in use, keep it away from

other metal objects, like

paper clips, coins, keys,

nails, screws or other small

metal objects, that can

make a connection from

one terminal to another.

Shorting the battery

terminals together may

cause burns or a fire.

c) Do not expose battery

pack to heat or fire.

Avoid storage in direct

sunlight.

d)Do not subject battery

pack to mechanical

shock.

e) In the event of battery

leaking, do not allow

the liquid to come into

contact with the skin or

eyes. If contact has been

made, wash the affected

area with copious

amounts of water and

seek medical advice.

f) Keep battery pack clean

and dry.

g)Wipe the battery pack

terminals with a clean

dry cloth if they become

dirty.

h)Battery pack needs to

be charged before use.

Optical hazard value exceeds applicable EL V

by factor of A: reduce exposure duration by

factor of A or attenuate emission by factor of A

Distance X

: EHV = 1

Optical hazard value = ELV

Distance X

: EHV = A

100

EHV

0.1

Distance

20V Multi-Function

Inflator WX092

WX092.X

Always refer to this

instruction and use

the correct charging

procedure.

i) Do not maintain battery

pack on charge when not

in use.

j) After extended periods

of storage, it may be

necessary to charge and

discharge the battery

pack several times

to obtain maximum

performance.

k)Recharge only with the

charger specified by

Worx . Do not use any

charger other than that

specifically provided for

use with the equipment.

l) Do not use any battery

pack which is not

designed for use with the

equipment.

m) Keep battery pack out

of the reach of children.

n)Retain the original

product literature for

future reference.

o)Remove the battery from

the equipment when not

in use.

p)Dispose of properly.

q)Do not mix cells of

different manufacture,

capacity, size or type

within a device.

r) Keep the battery away

from microwaves and

high pressure.

SAFETY POINTS FOR YOUR

FLASHLIGHT WORKLIGHT

SAFETY RULES FOR CORD

LESS PORTABLE HANDHELD

LIGHT

CHARGE BATTERY BEFORE

FIRST USE

CAUTION: Read, understand

and follow all Safety Rules

and Operating Instructions in

this Manual before using this

product.

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!

SAFETY INSTRUCTIONS

WARNING: Be sure to read

and understand all

instructions in this manual

before using this portable

hand-held light. Failure to

follow all instructions may

result in electric shock, fire

and/or serious personal

injury.

1. Know your cordless

portable hand-held light.

20V Multi-Function

Inflator

WX092

WX092.X

Read operator’s manual

carefully.

Learn its applications and

limitations, as well as the

specific potential hazards

related to this light.

2. Use only recommended

battery pack and charger.

Any attempt to use another

battery pack will cause

damage to the portable

hand-held light and could

possible explode, cause a

fire, or personal injury.

Note : For specific

information about battery

pack and charger ,please

refer to Table 1 in this

manual.

3. Remove battery pack

from portable hand-held

light before replacing

bulb or performing any

routine maintenance or

cleaning.

4. Let portable hand-held light

cool for several minutes

after use before changing

the bulb.

5. Do not disassemble the

portable hand-held light.

6. Do not place portable hand-

held light or battery pack

near fire or heat. They may

explode. Also, do not dispose

of a worn out battery pack

by incineration, even if it

is severely damaged or

completely worn out. The

battery may explode in fire.

7. Do not operate portable

hand-held light or

charging stand/

transformer near

flammable liquids or in

gaseous or explosive

atmospheres. Internal

sparks may ignite fumes.

8. To reduce the risk of

electric shock, do not

put portable hand-held

light in water or other

liquid. Do not place or store

portable hand-held light

where it can fall or be pulled

into a tub or sink.

9. Do not permit children to

use portable hand-held

light unsupervised. It is

not a toy. The temperature

of the bulb will become hot

after being on only a short

period of time. This hot

temperature can cause burn

injury if touched.

10. DO NOT USE OR PERMIT

USE OF PORTABLE HAND-

HELD LIGHT IN BED OR

SLEEPING BAGS. This

portable hand-held light

lens can melt fabric and a

burn injury could result.

20V Multi-Function

Inflator WX092

WX092.X

11. Keep light dry, clean,

and free from oil and

grease. Always use a clean

cloth when cleaning. Never

use brake fluid, gasoline,

petroleum-base products or

any strong solvent to clean

the portable hand-held light.

12. The light source of

this luminaire is not

replaceable; when the light

source reaches its end of life

the whole luminaire shall be

replaced.

SYMBOL

To reduce the risk of injury, user must

read instruction manual

Warning

Wear eye protection

Hearing protection must be worn

Risk of high temperature

Waste electrical products must not

be disposed of with household waste.

Please recycle where facilities exist.

Check with your local authorities or

retailer for recycling advice.

Li-I on

Li-Ion battery. This product has been

marked with a symbol relating to

‘separate collection’ for all battery

packs and battery pack. It will then

be recycled or dismantled in order to

reduce the impact on the environment.

Battery packs can be hazardous for the

environment and for human health since

they contain hazardous substances

Batteries may enter water cycle if disposed

improperly, which can be hazardous for

ecosystem. Do not dispose of waste batter-

ies as unsorted municipal waste

Do not burn

Class III

Replace any cracked protective shield

RCM marking

ABN: Australian Business Number. By

this number, business information such

as entity type, status, business location

etc. can be found at website http://abr.

business.gov.au.

ABN of Positec Australia Pty Limited is 14

101 682 357

20V Multi-Function

Inflator

WX092

WX092.X

PSI BAR KPA KG/CM

20V Multi-Function

Inflator WX092

WX092.X

100%

PSI BAR KPA KG/CM

A4A3

A2A1

E3 E4

20V Multi-Function

Inflator

WX092

WX092.X

100%

PSI BAR KPA KG/CM

A4A3

A2A1

E3 E4

Andere Handbücher für WX092

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Worx Elektrowerkzeuge Handbücher

Worx

Worx D-TAIL WT649.1 Bedienungsanleitung

Worx

Worx WU529 Bedienungsanleitung

Worx

Worx WX523 WorxSaw Bedienungsanleitung

Worx

Worx Sonicrafter WX679 Bedienungsanleitung

Worx

Worx Sonicrafter WX696 Bedienungsanleitung

Worx

Worx WX472 Installationshandbuch

Worx

Worx WX682L Bedienungsanleitung

Worx

Worx WX843 Series Betriebsanleitung

Worx

Worx MARKERX WX739 Bedienungsanleitung

Worx

Worx Sonicrafter WX678 Bedienungsanleitung

Worx

Worx Sonicrafter WX679 Bedienungsanleitung

Worx

Worx WX253 Bedienungsanleitung

Worx

Worx Sonicrafter WX696 Bedienungsanleitung

Worx

Worx Sonicrafter WX696 Bedienungsanleitung

Worx

Worx MakerX Installationshandbuch

Worx

Worx Sonicrafter WX676 Installationshandbuch

Worx

Worx WX041 Bedienungsanleitung

Worx

Worx WX543 Bedienungsanleitung

Worx

Worx WX680 Bedienungsanleitung

Worx

Worx WU670l Installationshandbuch

Worx

Worx WX696L X Series Bedienungsanleitung

Worx

Worx WX687L Bedienungsanleitung

Worx

Worx Sonicrafter WX671 Bedienungsanleitung

Worx

Worx Sonicrafter WX681 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch