Check after unpacking
Open the package to confirm that the components are integrity, then
check the printer's functions to ensure that it works properly.
❶Test power function:Connect the power supply. After the printer is powered on,confirm that if
the indicator of the knob is working properly ，and the indicator of the knob will display the Light blue
lightlight if it working properly .
❷Test knob function and Z-axis motion:Rotate the knob to confirm whether it can control the
printing platform move up and down,and whether the knob rotates smoothly.
❸Test photoelectric switch:Remove the printing platform and continue to rotate the knob clockwise
to control the lifting cantilever to descend until the trigger piece on the lifting cantilever is inserted into
the photoelectric switch groove to trigger it to conrm whether the lifting cantilever stops.
❹Test print function:Remove the printing platform,download the print file "print.wow"for
SparkMaker versionor "print.fhd"for SparkMaker FHD versionfrom SparkMaker official
website www.sparkmaker
3
d.comand save it to the SD card. Insert the SD card with the print le into
the printer card slot and the indicator of the knob will become the green breathing light,then press
the knob to start printing. At this time,the indicator light changes from green to red and flashes,the
lifting cantilever will drop to the position of the trigger photoelectric switch,then the light board will,emit
ultraviolet light,the fan will start to work,the screen will display the bottom layer pattern,and wait for a
bottom exposure time. After that,the light board is extinguished,the lifting cantilever will rise a certain
distance,and then decline again,then the light board emit ultraviolet light,and the screen displays the
next pattern... Continue this process until the end of printing.
❺Test tank:Check if the FEP membrane at the bottom of the tank has obvious scratches or broken
holes. Pour some water into the tank to check if it will leak.
10
Product working principle
SparkMaker SLA 3D printer
Designing a 3D solid model through 3D software,slice the model with SparkStudio,the
generated data will be used to accurately control the switch of the light board and the
movement of the lifting platform through the main board. The light beam emitted by the light
board passes through the controllable liquid crystal screen and is irradiated onto the surface
of the liquid photosensitive resin according to the designed path. Curing a layer of resin in a
specic area of the surface. When this layer is processed,a section of the model is generated.
The lifting platform is raised by a certain distance,the solid layer is covered with another layer
of liquid resin,and then the second layer is scanned,and the second solidified layer is firmly
bonded to the previous solidified layer,so that the layers are superposed to form a three-
dimensional model. After the model is taken out of the resin,clean the resin on the surface
of the model with alcohol,and the nal curing,and then polished,painted or colored to get the
desired product.
11
Check after unpacking
Product working principle
