WP Suspension wishes you lots of success and riding pleasure with your
front fork.
General notice:
Pay attention to the following notes, when you are working with WP suspension products as
described in this owners manual.
Regularly you need the special tools of WP Suspension next to the general equipment. These
tools, with a unique “T” number (available at your local WP suspension importer), protect you
from damaging the parts.
Always use aluminium protector-plates, when clamping our products or parts in the vice.
Always replace damaged or worn parts.
Clean all parts before assembling.
Always use clean and professional tools.
Always check your fork before riding.
Check fork for irregularities before each session
Consult your local WP suspension dealer for service. Or in case of any doubt.
Advice start settings WP MXMA 4800 KIT Suspension
Track Compression Rebound Preload Ride height
(clicks) (clicks) (turns)
Sand 10 18 3 0 lines
Hard-pack 12 16 0 2 lines
* Settings depended on ride style, rider, bike type and riders weight. This settings are mend for a base setup which suites most riders. Most front
forks are delivered with custom made setup based on riders weight there riding style and for what purpose they want to use the fork.
