English
11
10
To pair additional devices with
your V5BT, simply follow the
instructions under “Pairing with
your V5BT” on pages 6-7.
When the Power button is pressed
to turn the speaker on from Sleep
or Standby mode, the V5BT will
look for the most recently paired
device that was connected to the
speaker. If that device is available,
the V5BT will reconnect to it. If the
last paired device is not available,
the V5BT will continue to search
for the next most recently paired
device. It will connect with the
most recently paired device that
it finds.
Problem connecting? Visit wrensound.com/support for additional help.
When you wish to connect to a
specific paired device, press and
hold the Source button on the
front of the speaker for three (3)
seconds. The Bluetooth indicator
will blink amber two times per
second indicating that the V5BT
is trying to connect to a paired
device. Select “Wren Speaker” on
the source device. The Bluetooth
indicator will change to solid
white when an active connection
is established (Figure 5).
To clear the V5BT’s memory
of all paired devices, press and
hold the Setup button on the
rear of your V5BT and, while
holding the Setup button, press
the Power button on the front
control panel. The Volume
indicator will blink amber
two times to indicate that the
memory has been cleared. When
the V5BT is powered on again,
it will be in pairing mode and
ready to pair with a Bluetooth
device (see “Pairing with your
V5BT” on page 6).
Note:After you have cleared your
V5BT’s memory, you must delete
“Wren Speaker” from your source
device’s list of available Bluetooth
devices before you can pair it
with the V5BT again. To delete
a previously paired Wren V5BT
from your source device’s memory,
follow the directions provided by
the manufacturer.
Many households (and many individuals) have multiple Bluetooth-equipped devices that
they use for music. The Wren V5BT can “remember” pairings with up to six dierent
Bluetooth devices, eliminating the need to go through the initial pairing process every
time you switch devices.
Using multiple devices on your V5BT
solid
white
Figure 5
