WSE47 SOLAR SWIMMING POOL HEATER INSTRUCTION MANUAL 2
WSE Technologies Ph: (306) 244 –8808
303 47th St. E. Fax: (306) 244 - 9970
Saskatoon, SK Canada www.wsetech.com
INTRODUCTION
The WSE47 isa highly efficient, cost effective, and reliable way of heating your pool using
the power of the sun. The collectorsare constructed of corrosion resistant materials,
enabling them to provide many yearsof reliable operation. Evacuated tubesare designed
to rely on the sun’sradiation for heating rather than ambient temperatures, meaning the
pool can still be heated when the outside temperature islower than the pool’s
temperature. Thisisespecially beneficial at the beginning and end of the season when
daily air temperaturesare cool, resulting in an extended pool use season.
The collectorsare designed so that they can be installed either on theground or on a roof.
The best location to install the collectorsisan area that receivesthe most sunlight per day
and isasclose to the pool aspossible. We suggest assembling the collector at a maximum
distance of 10 m from thepool at an elevation lessthan 3 m above the pool.
For optimum performance the collector should be oriented facing true South. If the
collector can not be oriented facing south, the output will bereduced slightly but the
collector will still be able to absorb sunlight due to the cylindrical geometry of the tubes.
