WTC DEP 300s Bedienungsanleitung

USER MANUAL

DEP 300s - Q06905

Weld Control Communications

TABLEOFCONTENTS

WELDINGTECHNOLOGYCORP.©2017

Regarding this Documentation.............................................2

Revision History ...................................................................2

Languages Available..............................................................2

Symbols Used in this Documentation...................................3

Common Techniques Used in this Manual ..........................4

WTC Support - Industrial Technical services [ITS]............4

Working with Static-Sensitive Devices.................................5

Chapter 1: Overview...........................................................9

DEP 300s..............................................................................9

Physical Connections..........................................................11

Keypad layout......................................................................12

Chapter 2: Home Menu ...................................................19

1. System Settings...............................................................20

2. Network Connections .....................................................22

Backup / Restore.................................................................23

Network Communications..................................................29

3. Serial Network ................................................................37

4. Changing Language Preference ......................................39

Chapter 3: MODE SELECTION ..................................41

Home [f1]...........................................................................42

Chapter 4: Program Mode................................................43

Program Mode- Navigation Tree........................................44

Level 1: ...............................................................................45

Level 2: ...............................................................................46

Level 3: ...............................................................................47

Level 4: ...............................................................................48

Level 1.1: Review Schedule Menu......................................49

Programming a Schedule ....................................................51

WELDINGTECHNOLOGYCORP.©2017

Level 1. 2: Review Stepper Menu.......................................63

level 1. 3 Review Setups Menu ...........................................69

level 2.1 Review HIC Menu ...............................................70

level 2.2 EIP Options Menu...............................................70

level 2.3 Welder ID Menu ..................................................78

Level 2.4 Reload Options Menu.........................................79

Breaker Type.......................................................................83

Level 3. 1 Local Ethernet Menu.........................................89

Level 3.2 Fieldbus Mapping Menu.....................................95

Level 3.3 I/O Mapping.......................................................96

Level 3.4 Network Address Menu ......................................96

Level 4.1 Servo Cal.............................................................97

level 4.2 Spots .....................................................................98

Chapter 5: Status Mode..................................................105

Fault Menu .......................................................................108

fault filtering .....................................................................109

Stepper Status Menu ........................................................110

stepper reset ......................................................................112

RAFT Menu ....................................................................113

HIC Menu........................................................................115

IO Status Menu ................................................................115

Weld Data Menu ..............................................................117

Pressure Control Menu.....................................................120

Errors Menu .....................................................................120

Chapter 6: Display Mode ...............................................121

Heat Display Menu ..........................................................123

Chapter 7: Change Timer...............................................127

FAQ ..................................................................................131

How do I Upgrade DEP300 (EDEP) Software?..............131

M035030_V2.1-Q06905-12/2016

1 of 8

M035030_V2.1-Q06905-12/2016

2 of 8

REGARDING THIS DOCUMENTATION

This documentation is written to support the DEP 300s hand-held data

entry panel with software Q06905-23

It has been designed for planning, programming, start-up personnel,

operators, service technicians, plant operators, line builders and

maintenance personnel to assist with procedures related to installing

the weld control.

Screen shots of the software application are for illustrative purpose

only and may appear different than your specific application.

REVISION HISTORY

LANGUAGES AVAILABLE

This documentation was originally published in English. Translations

are available in Chinese and Japanese.



REVISION REL.DATE COMMENTS

1.0 1/28/11 InitialreleaseofmanualM‐035030,softwareQ06905‐00‐11.

2.0 6/20/16 CompleteupdateofmanualwithsoftwareversionQ96905‐23

2.1 12/19/16 AddednoteforBack‐upandRestorecycleandMStiming.Updated

formats.

M035030_V2.1-Q06905-12/2016

3 of 8

SYMBOLS USED IN THIS DOCUMENTATION

In compliance with the CE standard, the following symbols are

used to identify safety instructions. Their meaning is a s follows:

This symbol will be used wherever failure to observe safety measures

may result in death, severe bodily injury o serious damage to

property.

This symbol will be used wherever insufficient or lacking compliance

with instructions may result in personal injury.

This symbol denotes when insufficient or lacking compliance with

instructions may damage equipment or files.

NOTE:

This symbol informs the user about special features, or where to find

more information.

This symbol draws attention to specific instructions or product

features.

This symbol indicates that only WTC service personnel or WTC repair

partners should service or open this device. Breaking a warranty seal

will void the warranty of this device.

M035030_V2.1-Q06905-12/2016

4 of 8

COMMON TECHNIQUES USED IN THIS MANUAL

The following conventions are used throughout this manual:

• Bulleted lists such as this one provide information, not

procedural steps.

JNumbered lists provide sequential steps or hierarchical

information.

Italic typeisusedforemphasis.

WTC SUPPORT - INDUSTRIAL TECHNICAL SERVICES [ITS]

WTC tests all of our products to ensure that they are fully operational

when shipped from the manufacturing facility. If you are experiencing

installation or startup problems, please review the troubleshooting

information contained in this publication. If you need assistance,

please contact Customer Support (see the table below); our trained

technical specialists are available to help. When emailing please

provide a photograph of the serial tag and Hardware Status Screen on

the DEP 300s if possible.

If the product is not functioning and needs to be returned, contact

your distributor. You must provide a Customer Support case number

to your distributor in order to complete the return process.



Phone

United States/Canada 1.248.477.3900 Ext: 3020

Outside United States/

Canada



Internet

Worldwide Go to http://support.wtc.com

M035030_V2.1-Q06905-12/2016

5 of 8

WORKING WITH STATIC-SENSITIVE DEVICES



ESD COSTS!

Electrostatic discharge (ESD) can ignite flammable materials and

damage electronic components. Static electricity can attract

contaminants in clean environments or cause products to stick

together. Other costs of ESD-damaged electronic devices are in their

replacement and production down time. Associated costs of repair

and rework, shipping, labor and overhead can be significant. Reducing

losses to ESD and static electricity is an ABSOLUTE NECESSITY.



PERSONNEL GROUNDING

Before touching any Electrostatic Discharge Sensitive (ESDS) devices or

circuit boards, put on and wear an Electrostatic Discharge (ESD) wrist

strap. Ground this strap through a one megohm (1 MΩ) resistor.

HANDLING OR MOVING ESDS DEVICES

Handle all circuit boards by their edges ONLY. NEVER touch the traces

or edge pad connectors.

WORKSTATION REQUIREMENTS

If diagnostics are required, move the circuit board to an approved ESD

workstation. A static-safe workstation must include a grounded ESD

mat, wrist strap and cord. The measured static voltage at a workstation

MUST NOT exceed 50 volts.

For detailed information about ESD contact:

WTC Industrial Technical Services

Phone: +1 248-477-3900 | Fax: +1 248-477-8897

Email: [email protected]

Website: www.weldtechcorp.com

HOW TO GET HELP AND SUPPORT

NEVER use the personnel grounding system described below when

working with voltages above 220 VAC.

NOTE:

Use ONLY static-shielding containers for transporting ESDS devices or

circuit boards.

M035030_V2.1-Q06905-12/2016

6 of 8

For technical support, contact WTC's Industrial Technical Services

department. Please have the following information available:

Your Contact Information:

• Company Name

• Phone Number

• FaxNumber

• Email Address

Weld Control Part Number and Serial Number

• Located on the serial tag on the outside of the cabinet

Weld Timer and DEP-300 Firmware Revisions

• The weld timers firmware revision is located in the Display Mode

menu.

• The DEP-300s firmware revision is located in the System Settings

menu.

Description of Problem

• Faults and Alerts

• Mechanical and Electrical Issues

• Weld Quality Issues

M035030_V2.1-Q06905-12/2016

7 of 8

NOTES:

Andere WTC Handheld Handbücher

WTC

WTC DEP-100S Installationshandbuch

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Unitech

Unitech HT1 1D Batch Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Symbol

Symbol MC18 Installations- und Betriebshandbuch

Acer

Acer n20 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung