Wyred 4 Sound MS1 Bedienungsanleitung

MS Music Server
Owner’s Manual and Setup Guide

© Wyred 4 Sound. All rights reserved. MS Music Server
Owner’s Manual and Setup Guide v1.4
2
Table of Contents
Section
Page
Table of Contents
2
Important Safeguards
3-4
Special Notes
4
Package Contents
5
Design Features
5
Getting Connected
5
Configuring the MS Music Server
6-10
Manually Adding Music Files - PCs
11-12
Manually Adding Music Files - Apple Computers
13
Installing Roon (example of installing an application)
14-16
Installing other popular apps
16-20
Warranty Coverage
21-22
Obtaining Warranty Service
22
Service
22-23

© Wyred 4 Sound. All rights reserved. MS Music Server
Owner’s Manual and Setup Guide v1.4
3
Important Safeguards
●All the safety and operating instructions should be read before this product is operated.
●The safety and operating instructions should be retained for future reference.
●All warnings on the appliance and in the operating instructions should be adhered to.
●Follow all instructions.
●The appliance should not be used near water or moisture –for example, in a wet basement or near
a swimming pool, and the like.
●Clean only with soft, dry cloth.
●Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
●Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
●Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two
blades with one wider than the other. A grounding plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit your outlet, consult an electrician for replacement of the obsolete outlet.
●Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from the apparatus.
●Unplug this apparatus during lightning storms or when unused for long periods of time.
●Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
damaged in any way such as the power cord or plug is damaged. Other damage may occur if liq-
uid or objects have been dropped or spilled into the apparatus. Dropping the apparatus, exposure
to rain, and excessive moisture may cause additional damage.
●Keep the unit in a well ventilated environment. Ensure at least 4” clearance around top and sides.
●CAUTION: These servicing instructions are for use by qualified service personnel only. To re-
duce the risk of electric shock, do not perform any servicing other than that contained in the oper-
ating instructions unless you are qualified to do so.
●WARNING: To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids,
such as vases, shall not be placed on apparatus.
●WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect de-
vice shall remain readily operable.
●CAUTION: The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock.
●No naked flame sources, such as lighted candles, should be placed on the apparatus.
●WARNING: The terminals marked with symbol of “+/-“may be of sufficient magnitude to con-
stitute a risk of electric shock. The external wiring connected to the terminals requires installation
by an instructed person or the use of ready-made insulated leads or cords.
●Correct Disposal of this product. This marking indicates that this product should not be dis-
posed with other household wastes throughout the EU. To prevent possible harm to the envi-
ronment or human health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product was purchased. They can take

© Wyred 4 Sound. All rights reserved. MS Music Server
Owner’s Manual and Setup Guide v1.4
4
this product for environmentally safe recycling.
●Keep your packaging! It is custom made for your unit and will effectively protect it for possible
future use.
●Be sure to register your product. It is very important to complete the warranty registration form
located on our website. Complete and submit the form within 30 days of purchase to activate your
warranty.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
●Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
Special Notes
•CDs must be inserted into the server label side up.
•Take Caution to power the server down by a quick press of the power button. Do not unplug
the server while it is powered on or press and hold the power button to shut down.
•We highly recommend backing up your hard drive contents to an external hard drive on a
regular basis to prevent loss of data. Wyred 4 Sound is not responsible for any information lost in
the event of a component failure.
•If the server is not connected to the Internet when ripping CDs it will be unable to locate
tagging information and album artwork.

© Wyred 4 Sound. All rights reserved. MS Music Server
Owner’s Manual and Setup Guide v1.4
5
Package Contents
●1 –Music Server
●1 –Power Supply
●1 –Power Cable
●1 –User Manual
Design Features
•Drag, drop, and easily manage all of your local files
•Stream radio and music from included apps like Squeezebox, Spotify, and Tidal
•Roon Core Server
•AirPlay and DLNA-enabled
•Powerful Intel® Core™ i3 or Intel® Core™ i7 quad core 7th generation processors
•4 or 16 GB RAM
•Internal SSD for operating system
•Built-in slot drive for easy CD ripping
•Internal hard drive for storage and superior playback (you can also use your NAS)
•USB, I2S, Coax and Optical outputs
•All-aluminum enclosure
Getting Connected
1. Place the Server in the intended location and ensure that it has proper ventilation. We recommend
that if you are placing it in an enclosed cabinet, it is not on or near any other component that
produces excessive heat.
2. Connect the power supply to the wall outlet and then to the Server high current jack on the right
side of the rear panel.
3. Next connect an Ethernet cable from your router to the Ethernet port on the rear panel of the
server. (Alternatively you can use a wireless access point to connect the server to your router)
4. Connect the appropriate digital output to your DAC using the appropriate digital cable. The I²S
output is not a standard HDMI format output and is configured for the Wyred 4 Sound DAC-2v2
5. Power the unit on by pressing the power button located on the right side of the front panel. When
turning the unit off use a quick press of the power button. It will shut down in less than 30
seconds. Do not press and hold the power button to shut it down.
(Power “on” is indicated by blue light directly above the power button)
6. Proceed to the appropriate section for configuring the server for your desired use and enjoy!

© Wyred 4 Sound. All rights reserved. MS Music Server
Owner’s Manual and Setup Guide v1.4
6
Configuring the MS Music Server
All setup and software configuration menus for your new server are adjusted by using a computer’s
Internet browser. Type the following address in the browser address bar.
server.wyred4sound.com
The following screen will be displayed…
Click the Manage button and the following menu will be displayed…
The software version number, Music Server Model, IPAddress, and MAC address is shown here.
Clicking Home at any time will return to this information screen.

© Wyred 4 Sound. All rights reserved. MS Music Server
Owner’s Manual and Setup Guide v1.4
7
Clicking System will give the options to Reboot or Power Down your Music Server.
Clicking Help displays additional information about your server.
Clicking Settings enables adjustments of various settings within the system.
Settings for installed applications can be adjusted from this menu. For example clicking Roon Server
allows for adjusting settings for your Roon Server. Localization allows for setting time zone and
language.
System Settings is used to rename your Music Server; in the above examples our server is titled ms1.
Clicking the Apps link opens the menus for controlling, installing, and removing Applications.

© Wyred 4 Sound. All rights reserved. MS Music Server
Owner’s Manual and Setup Guide v1.4
8
Local Storage displays information about the internal SSD drive, available storage space, etc.
Clicking an installed application such as Roon Server, displays information about the application.
Clicking Software Manager is where the software version can be updated. If the Latest SW Version is
different than the Current SW Version clicking the Update button allows for updating the system software.

© Wyred 4 Sound. All rights reserved. MS Music Server
Owner’s Manual and Setup Guide v1.4
9
The Installed Apps tab displays the applications that are currently installed on your Music Server with a
brief description of what the software is used for.
Clicking on a particular app gives you the option to Delete application from your server. You must
confirm that you want to delete an app to remove it from your system.
Clicking the Available Apps tab displays various applications that are available to be installed on your
system.

© Wyred 4 Sound. All rights reserved. MS Music Server
Owner’s Manual and Setup Guide v1.4
10
Clicking on an available app gives the option to Install the application. In the example below the Storage
backup app is shown. This is the application used to backup your internal local storage SSD drive.
To automatically rip your CDs to FLAC files on the server install the CD Import app. This app will
automatically rip any standard CD that is inserted. You may click on the app and monitor the application
as it performs its magic. The app will also run in the background if you prefer to not monitor the ripping.
Inhaltsverzeichnis
Beliebte Server Handbücher anderer Marken

iRobo
iRobo IPC2U Bedienungsanleitung

Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung

Asus
Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung

HP
HP Integrity rx2600 Installationsanleitung

Milestone
Milestone Husky IVO 350T Bedienungsanleitung











