WYTRON MagicCD Series Bedienungsanleitung
2
CONTENT
1.
Introduction 5
2.
Caution 7
3.
Installation 8
4.
Operation 17
5.
Main Function 22
5.1
Copy 22
5.2
Copy + Comp 23
5.3
Emulate 23
5.4
Emu + Copy 24
5.5
Compare 24
5.6
Quick Erase 24
5.7
Verify 24
5.8
Load (if HDD installed) 25
5.9
External 25
6.
Sub-function 27
6.1
Setup 27
6.1.1 Start Writers 27
6.1.2 Write Method 28
3
6.1.3 CD Write Speed 28
6.1.4 DVD Write Speed 28
6.1.5 CD-ROM Drive 29
6.1.6 Autoloader (if autoloader installed) 29
6.1.7 Eject Disc 30
6.1.8 Buzzer 30
6.1.9 CD+G 31
6.1.10 CopyComp Eject 31
6.1.11 Read CDDA index0 31
6.1.12 Skip Read Error 31
6.1.13 MODE 2 Compare 32
6.1.14 Power On Wait 32
6.1.15 Show version 32
6.1.16 Go load trays 32
6.1.17 Transfer mode 33
6.1.18 Turbo Copycomp 34
6.1.19 Change Password 34
6.1.20 Startup Command 35
6.1.21 CD to CD (if HDD installed) 35
6.1.22 HDD Partition Size (if HDD installed) 36
4
6.1.23 Hdd Partition Group (if HDD installed) 37
6.1.24 HD to CD Write Speed (if HDD installed) 38
6.1.25 HD to DVD Write Speed (if HDD installed) 39
6.1.26 Grip before accept 39
6.1.27 Load Nonblank Disc (if HDD installed) 40
6.1.28 CDDA load speed (if HDD installed) 40
6.1.29 Language (for DVD-6xx series only) 40
6.2
Edit 41
6.3
Delete 46
6.4
Clear 46
6.5
Disc Info 46
6.6
Show Drive 46
6.7
Burn in 47
6.8
Update 48
6.9
Reset 49
7.
Circuit drawing 50
8.
Trouble shooting 54
9.
Device support 56
10.
Appendix 58
5
1. Introduction
Thank you for choosing MagicDVD series CD/DVD duplication
controller card. Hopefully this equipment will bring you
satisfactory and great pleasure in CD/DVD duplication.
Features:
1. Stand-alone design, no PC or software required.
2. Easy operation, no training required.
3. Load, Copy, Compare, Verify, Emulate, Editing, etc.
4. Compatible formats depend on the writers installed.
5. On-the-fly direct copy or through hard drive loading.
6. Track selection available for copying music tracks.
7. Compatible with many brands of CD/DVD writers
such as Pioneer, NEC, Lite-On, Asus, Sony, etc.
IMPORTANT NOTE:
1. Make sure voltage setting (AC115/230V) is correct.
2. Stable input of power is required for normal
operation.
3. Duplicator should be placed in a clean & cool
working environment.
4. Check, clean the master and CD/DVD discs before
duplication starts.
5. Do not touch recording surface of the discs.
6. Do not move the duplicator during operation.
7. DO NOT remove the serial number labels
attached on controller card. Warranty will be
VOID if any label is torn off or damaged. Wytron
reserves the right to fix those cards without
labels.
6
8. Warranty will be VOID if the controller card has
been tampered with. Wytron will not accept to
repair these controller cards even within
warranty. The controller card must be
maintained in the original shipped status to
comply the warranty condition, no artificial
modification allowed.
7
2. Caution
In no circumstance will Wytron be liable for direct, indirect,
special, incidental, or consequential damages arising out of the
use or inability to use of this product or documentation even if
is advised of the possibility of such damages. Wytron shall not
be liable for any hardware used with the product, including the
costs of repairing, replacing, or recovering such hardware.
Wytron reserves the right to offer RMA service for
non-warranty items due to availability of service parts and
production changes.
8
3. Installation
You may get MagicCD or MagicDVD series duplicator in three
possibilities:
A. Controller only
1. Prepare necessary devices including:
a. IDE bus CD/DVD-ROM drive
b. IDE bus CD/DVD writer.
c. Suitable tower case.
d. Hard drive.
e. Switching power supply (Appropriate capacity is
suggested. Bad quality of power supply might
damage the controller board and cause unstable
operation.
2. Assemble all required devices mentioned above and make
sure all IDE writers are in master mode. The
CD/DVD-ROM reader and hard drive (optional) have to be
connected together at specific slot (black, besides the
power connector) on the controller card with hard drive in
master mode and CD/DVD-ROM in slave. The
CD/DVD-ROM should be connected to the middle
connector of an EIDE cable and the hard drive to the last
connector. If there is only a CD/DVD-ROM or hard drive
installed, the device should be in master mode and be
always connected at the end of the EIDE cable.
Installation profiles are suggested below from left side of
cross-section view. The number of writers installed may
vary due to different controller card and requirements.
9
Model:DVD-688
EIDE data cables
DRV #2
DRV #3
DRV #4
DRV #5
DRV #6
DRV #9
DRV #8
DVD-688
DRV #10
DRV #11
DRV #7
CD/DVD-ROM
Hard drive
(Situation in max. connection)
10
Model:DVD-668
EIDE data cables
Hard drive
CD/DVD-ROM
DVD-668
IDE #2
IDE #3
IDE #4
IDE #5
IDE #6
(Situation in max. connection)
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere WYTRON Controller Handbücher
