Xantrex FREEDOM HF 1000 Bedienungsanleitung

Freedom HF

Inverter/Charger

Installation Guide

Freedom HF 1000

Freedom HF 1800

Freedom HF Install Guide.book Page i Friday, December 21, 2007 9:57 PM

Freedom HF Install Guide.book Page ii Friday, December 21, 2007 9:57 PM

This guide for use by qualified installers only

Freedom HF

Inverter/Charger

Installation Guide

Freedom HF Install Guide.book Page i Friday, December 21, 2007 9:57 PM

This guide for use by qualified installers only

About Xantrex

Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with

products ranging from small mobile units to utility-scale systems for wind, solar, batteries, fuel cells,

microturbines, and backup power applications in both grid-connected and stand-alone systems. Xantrex

products include inverters, battery chargers, programmable power supplies, and variable speed drives

that convert, supply, control, clean, and distribute electrical power.

Trademarks

Freedom HF Inverter/Charger is a trademark of Xantrex International. Xantrex is a registered trademark

of Xantrex International.

Other trademarks, registered trademarks, and product names are the property of their respective owners

and are used herein for identification purposes only.

Notice of Copyright

Xantrex Freedom HF Inverter/Charger Installation Guide © December 2007 Xantrex International. All

rights reserved.

Exclusion for Documentation

UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”)

(A)MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR

OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.

(B)ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER

SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF

SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’SRISK; AND

(C)REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH

STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY CANNOT

BE GUARANTEED. APPROVED XANTREX CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE

VERSION WHICH IS POSTED AT WWW.XANTREX.COM.

Date and Revision

December 2007 Rev A

Part Number

975-0395-01-01

Product Numbers

806-1020 (Freedom HF 1000)

806-1840 (Freedom HF 1800)

Contact Information

Telephone: 1 800 670 0707 (toll free North America)

1 408 987 6030 (direct)

Fax: 1 800 994 7828 (toll free North America)

Email: [email protected]

Web: www.xantrex.com

Freedom HF Install Guide.book Page ii Friday, December 21, 2007 9:57 PM

iii

This guide for use by qualified installers only

About This Guide

Purpose

The purpose of this Installation Guide is to provide explanations and

procedures for setting up and installing a Freedom HF Installation*.

For complete information on how to operate, maintain, and troubleshoot

the Freedom HF unit, see the Freedom HF Inverter/Charger Owner’s

Guide (Doc. Part Number: 975-0390-01-01)

* Recreational, Fleet Vehicle, or Marine installation.

Scope

The Guide provides safety guidelines, detailed planning and setup

information, as well as procedures for installing the inverter/charger unit.

It does not provide details about particular brands of batteries. You need

to consult individual battery manufacturers for this information.

Audience

The Guide is intended for anyone who needs to install a Freedom HF

Inverter/Charger installation. Installers should be technicians or

electricians who are certified for the type of specific installation.

Organization

This Guide is organized into two chapters and two appendixes.

Chapter 1 provides information to help in installing a Freedom HF

Inverter/Charger Installation.

Chapter 2 explains how to configure the Freedom HF to best meet your

electrical system requirements.

Appendix A contains electrical performance information and product

specifications.

Appendix B illustrates a typical marine installation for the Freedom HF.

Freedom HF Install Guide.book Page iii Friday, December 21, 2007 9:57 PM

About This Guide

iv 975-0395-01-01

This guide for use by qualified installers only

Conventions Used

The following conventions are used in this guide.

Related Information

You can find more information about Xantrex Technology Inc. as well as

its products and services at www.xantrex.com

WARNING

Warnings identify conditions or practices that could result in personal injury or

loss of life

CAUTION

Cautions identify conditions or practices that could result in damage to the unit or

other equipment.

Important:

These notes describe things which are important for you to know,

but not as serious as a caution or warning.

Freedom HF Install Guide.book Page iv Friday, December 21, 2007 9:57 PM

This guide for use by qualified installers only

Important Safety Instructions

IMPORTANT: Read and save this Installation Guide

for future reference.

This chapter contains important safety and installation instructions

for the Freedom HF Inverter/Charger units–Freedom HF 1000 and

Freedom HF 1800.

1. BEFORE INSTALLING AND USING THE FREEDOM HF, READ ALL

INSTRUCTIONS AND CAUTIONARY MARKINGS ON THE FREEDOM HF,

THE BATTERIES, AND ALL APPROPRIATE SECTIONS OF THIS GUIDE.

2. Do not expose the Freedom HF to rain, snow, spray, or bilge water.

To reduce risk of fire hazard, do not cover or obstruct the ventilation

openings. Do not install the Freedom HF in a zero-clearance

compartment. Overheating may result.

3. To avoid a risk of fire and electric shock, make sure that existing

wiring is in good condition and that wire is not undersized. Do not

operate the Freedom HF with damaged or substandard wiring.

4. The use of any attachments not recommended or sold by Xantrex,

may result in risk of fire, electric shock, or injury to persons.

5. Do not operate the Freedom HF if it has received a sharp blow, been

dropped, or otherwise damaged in any way. If the Freedom HF is

damaged, see the Warranty section.

WARNING: Limitations on use

The Freedom HF is not intended for use in connection with life support systems

or other medical equipment or devices.

CAUTION: Risk of injury

To reduce the risk of injury, charge only 12 Vdc lead-acid (GEL, AGM, and

Flooded) rechargeable batteries. Other battery types may burst, causing personal

injury and damage.

Freedom HF Install Guide.book Page v Friday, December 21, 2007 9:57 PM

vi 975-0395-01-01

This guide for use by qualified installers only

6. Do not disassemble the Freedom HF. It contains no user-serviceable

parts. See Warranty for instructions on obtaining service. Attempting

to service the Freedom HF yourself may result in a risk of electrical

shock or fire and will void your warranty. Internal capacitors remain

charged after all power is disconnected.

7. To reduce the risk of electrical shock, disconnect both AC and DC

power from the Freedom HF before attempting any maintenance or

cleaning or working on any circuits connected to the Freedom HF.

Turning off controls will not reduce this risk.

8. The Freedom HF must be provided with an equipment-grounding

conductor connected to the AC input ground.

1. WORKING IN THE VICINITY OF BATTERIES IS DANGEROUS. BATTERIES

GENERATE EXPLOSIVE GASES DURING NORMAL OPERATION.

THEREFORE, IT IS OF UTMOST IMPORTANCE THAT EACH TIME BEFORE

SERVICING THE UNIT IN THE VICINITY OF THE BATTERY, THAT YOU

READ THIS MANUAL AND FOLLOW THE INSTRUCTIONS EXACTLY.

2. This equipment contains components which tend to produce arcs or

sparks. To prevent fire or explosion, do not install the Freedom HF in

compartments containing batteries or flammable materials, or in

locations that require ignition-protected equipment. This includes any

space containing gasoline-powered machinery, fuel tanks, as well as

joints, fittings, or other connections between components of the fuel

system.

3. To reduce the risk of battery explosion, follow these instructions and

those published by the battery manufacturer and the manufacturer of

any unit you intend to use in the vicinity of the battery.

WARNING: Explosion hazard

Freedom HF Install Guide.book Page vi Friday, December 21, 2007 9:57 PM

975-0395-01-01 vii

This guide for use by qualified installers only

Personal Precautions When Working With Batteries

1. Study and follow all of the battery manufacturer's specific

precautions, such as removing or not removing cell caps while

charging, and recommended rates of charge.

2. Add distilled water in each cell until battery acid reaches the level

specified by the battery manufacturer. This helps to purge excessive

gas from cells. Do not overfill. For a battery without cell caps,

carefully follow manufacturer's recharging instructions.

3. Make sure the area around the battery is well ventilated.

4. Never smoke or allow a spark or flame near the engine or batteries.

5. Use extra caution to reduce the risk or dropping a metal tool on the

battery. It could spark or short circuit the battery or other electrical

parts and could cause an explosion.

6. Remove all metal items, like rings, bracelets, and watches when

working with batteries. Batteries can produce a short circuit current

high enough to weld metal to skin, causing a severe burn.

7. Have someone within range of your voice or close enough to come to

your aid when you work near a lead-acid battery.

8. Have plenty of fresh water and soap nearby in case battery acid

contacts skin, clothing, or eyes.

9. Wear complete eye protection and clothing protection. Avoid

touching your eyes while working near batteries.

10. If battery acid contacts skin or clothing, wash immediately with soap

and water. If acid enters your eye, immediately flood it with running

cold water for at least twenty minutes and get medical attention

immediately.

11. If you need to remove a battery, always remove the ground terminal

from the battery first. Make sure all accessories are off so you don’t

cause an arc.

WARNING: B

ATTERIES

PRESENT

ISK

LECTRICAL

HOCK

URN

FROM

IGH

HORT

-C

IRCUIT

URRENT

, F

IRE

XPLOSION

FROM

ENTED

ASES

. O

BSERVE

ROPER

RECAUTIONS

Freedom HF Install Guide.book Page vii Friday, December 21, 2007 9:57 PM

viii 975-0395-01-01

This guide for use by qualified installers only

12. Never charge a frozen battery.

13. Clean battery terminals. Be careful to keep corrosion from coming

into contact with your eyes.

MARINE UNIT LOCATION

14. Locate the Freedom HF unit away from batteries in a separate, well

ventilated compartment.

15. Never place the Freedom HF unit directly above batteries; gases from

a battery will corrode and damage the unit

16. Never allow battery acid to drip on the unit when reading gravity, or

filling battery.

17. Do not operate the unit in a closed in area, or restrict the ventilation in

any way.

DC CONNECTION PRECAUTION

18. Connect and disconnect DC output connections only after setting any

marine unit switches to off position and opening AC disconnect

19. FOR MARINE INSTALLATIONS, EXTERNAL CONNECTIONS

TO THE UNIT SHALL COMPLY WITH THE UNITED STATES

COAST GUARD ELECTRICAL REGULATIONS(33CFR183, SUB

PART I)

20. PROPER DISPOSAL OF BATTERIES IS REQUIRED. REFER TO

YOUR LOCAL CODES FOR DISPOSAL REQUIREMENTS.

Freedom HF Install Guide.book Page viii Friday, December 21, 2007 9:57 PM

Andere Handbücher für FREEDOM HF 1000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xantrex Wechselrichter Handbücher

Xantrex

Xantrex XPower 500 Bedienungsanleitung

Xantrex

Xantrex DR - REV A Bedienungsanleitung

Xantrex

Xantrex XPower Pocket Inverter 175 Bedienungsanleitung

Xantrex

Xantrex Xantrex PRO XM 1000 Bedienungsanleitung

Xantrex

Xantrex 807-1055 Bedienungsanleitung

Xantrex

Xantrex 815-3012-02 Bedienungsanleitung

Xantrex

Xantrex PROWATT SW SW 1000 Bedienungsanleitung

Xantrex

Xantrex 807-1055 Bedienungsanleitung

Xantrex

Xantrex Freedom Xi 807-1000 Bedienungsanleitung

Xantrex

Xantrex XW4024-120/240-60, XW4548-120/240-60,... Bedienungsanleitung

Xantrex

Xantrex GT5.0-NA-240 Bedienungsanleitung

Xantrex

Xantrex GT100-208 Bedienungsanleitung

Xantrex

Xantrex RV2012GS Bedienungsanleitung

Xantrex

Xantrex PROWATT SW SW 1000 Bedienungsanleitung

Xantrex

Xantrex SW Series Bedienungsanleitung

Xantrex

Xantrex XPower 450 Bedienungsanleitung

Xantrex

Xantrex PV-100208 Bedienungsanleitung

Xantrex

Xantrex PROwatt 1750 Bedienungsanleitung

Xantrex

Xantrex XPower 5000 Bedienungsanleitung

Xantrex

Xantrex 784-9115-01 Bedienungsanleitung

Xantrex

Xantrex XPower Inverter 3000 Bedienungsanleitung

Xantrex

Xantrex Freedom HF Bedienungsanleitung

Xantrex

Xantrex XPower 300 Bedienungsanleitung

Xantrex

Xantrex PV-30208 Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung