Xantrex PV100S-208 Bedienungsanleitung

PV100S 100 kW

Grid-Tied

Photovoltaic

Inverter

Operation and Maintenance Manual

PV100S-208

PV100S-480

PV100S 100 kW Grid-Tied

Photovoltaic Inverter

Operation and Maintenance Manual

About Xantrex

Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with products from

50 watt mobile units to one MW utility-scale systems for wind, solar, batteries, fuel cells, microturbines, and backup

power applications in both grid-connected and stand-alone systems. Xantrex products include inverters, battery

chargers, programmable power supplies, and variable speed drives that convert, supply, control, clean, and distribute

electrical power.

Trademarks

PV100S 100 kW Grid-Tied Photovoltaic Inverter is a trademark of Xantrex International. Xantrex is a registered

trademark of Xantrex International.

Other trademarks, registered trademarks, and product names are the property of their respective owners and are used

herein for identification purposes only.

Notice of Copyright

PV100S 100 kW Grid-Tied Photovoltaic Inverter Operation and Maintenance Manual© May 2005 Xantrex

Disclaimer

UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”)

(a) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY

TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.

(b) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSS OR DAMAGE, WHETHER DIRECT,

INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH

INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK.

Date and Revision

May 2005 Revision C

Part Number

152379 Rev C

Contact Information

Telephone: 1 800 670 0707 (toll free North America)

1 360 925 5097 (direct)

Fax: 1 360 925 5143 (direct)

Email: [email protected]

Web: www.xantrex.com

152379 Rev C iii

About This Manual

Purpose

The purpose of this Operation and Maintenance Manual is to provide explanations

and procedures for operating, maintaining, and troubleshooting the PV100S 100

kW Grid-Tied Photovoltaic Inverter. Installation instructions are available in the

PV100S 100 kW Grid-tied Photovoltaic Inverter Planning and Installation

Manual.

Scope

This Manual provides safety guidelines and information about operating and

troubleshooting the unit.

Audience

This Manual is intended for anyone who needs to operate the PV100S 100 kW

Grid-Tied Photovoltaic Inverter. Operators must be familiar with all the safety

regulations pertaining to operating high-voltage equipment as dictated by local

code. Operators must also have a complete understanding of this equipment’s

features and functions.

Organization

This Manual is organized into five chapters and one appendix.

Chapter 1, “Introduction” contains information about the features and functions of

the PV100S 100 kW Grid-Tied Photovoltaic Inverter.

Chapter 2, “Operation” contains information on the basic operation of the

PV100S 100 kW Grid-Tied Photovoltaic Inverter.

Chapter 3, “Commissioning” contains information on safely commissioning the

PV100S 100 kW Grid-Tied Photovoltaic Inverter.

Chapter 4, “Troubleshooting” contains information and procedures for

troubleshooting the PV100S 100 kW Grid-Tied Photovoltaic Inverter. It provides

descriptions of common situations and errors that may occur and provides

possible solutions for resolving fault conditions. It also provides instructions for

clearing faults manually, if required.

Chapter 5, “Preventative Maintenance” contains information and procedures for

performing preventative maintenance on the PV100S 100 kW Grid-Tied

Photovoltaic Inverter.

Appendix A provides the environmental and electrical specifications for the

PV100S 100 kW Grid-Tied Photovoltaic Inverter.

About This Manual

iv 152379 Rev C

Conventions Used

The following conventions are used in this guide.

This Manual contains information for two models of the PV100S 100 kW Grid-

Tied Photovoltaic Inverter. One model is designed to operate with a 208 Vac utility

input, and the other model is designed to operate with a 480 Vac utility input.

• The model PV100S-208 100kW Grid-Tied Photovoltaic Inverter

(208 Vac input) will be referred to as the PV100S-208 when it is being

referenced individually.

• The model PV100S-480 100kW Grid-Tied Photovoltaic Inverter

(480 Vac input) will be referred to as the PV100S-480 when it is being

referenced individually.

• When both models are being referenced together, they will be referred to as the

PV100S.

WARNING

Warnings identify conditions or practices that could result in personal injury or loss of life.

CAUTION

Cautions identify conditions or practices that could result in damage to the unit or other

equipment.

Important:

These notes describe things which are important for you to know, but not as

serious as a caution or warning.

About This Manual

152379 Rev C v

Abbreviations and Acronyms

Related Information

You can find more information about Xantrex Technology Inc. as well as its

products and services at www.xantrex.com.

ANSI American National Standards Institute

CCU2 Converter Control Unit 2

CFM Cubic Feet per Minute

CW Clockwise

DSP Digital Signal Processor

FPGA Field Programmable Gate Array

GUI Graphical User Interface

IEEE Institute of Electrical and Electronics Engineers

IGBT Insulated Gate Bipolar Transistor

IPM Intelligent Power Module

kcmil 1000 circular mils

LAN Local Area Network

LCD Liquid Crystal Display

NFPA National Fire Protection Association

PBX Private Branch Exchange

PSL Phase-Shift Loop

POTS Plain Old Telephone Service

PV Photovoltaic

UFCU Universal Frontpanel Control Unit

152379 Rev C vii

Important Safety Instructions

SAVE THESE INSTRUCTIONS - DO NOT DISCARD

This manual contains important safety instructions for the PV100S that must be

followed during installation and maintenance procedures.

WARNING: Shock Hazard

Read and keep this Operation and Maintenance Manual for future reference.

Before installing PV100S (either model), read all instructions, cautionary markings, and

all other appropriate sections of this manual. Failure to adhere to these warnings could

result in severe shock or possible death. Exercise extreme caution at all times to prevent

accidents.

WARNING: Shock Hazard

The PV100S enclosures contain exposed high voltage conductors. The enclosure doors

should remain closed with the latches tightened, except during maintenance or testing.

These servicing instructions are for use by qualified personnel who meet all local and state

code requirements for licensing and training for the installation of Electrical Power

Systems with AC and DC voltage to 600 volts. To reduce the risk of electric shock, do not

perform any servicing other than that specified in the installation instructions unless you

are qualified to do so. Do not open the cabinet doors if extreme moisture is present (rain or

heavy dew).

WARNING: Lethal Voltage

In order to remove all sources of voltage from the PV100S, the incoming power must be

de-energized at the source. This may be done at the main utility circuit breaker and by

opening the AC Disconnect and the DC Disconnect Switches on the PV100S. Review the

system configuration to determine all of the possible sources of energy. In addition, allow

5 minutes for the DC bus capacitors, located on the ceiling of the cabinet, to discharge

after removing power.

Safety

viii 152379 Rev C

General Safety Precautions

1. When installing the PV100S use only components recommended or sold by

Xantrex. Doing otherwise may result in a risk of fire, electric shock, injury to

persons, and will void the warranty.

2. Do not attempt to operate the PV100S if it has been dropped, or received more

than cosmetic damage during transport or shipping. If the PV100S is

damaged, or suspected to be damaged, see the Warranty section of this

manual.

3. To reduce the risk of electrical shock, lock-out and tag the PV100S before

attempting any maintenance, service, or cleaning.

Personal Safety

Follow these instructions to ensure your safety while working with the PV100S.

Safety Equipment

Authorized service personnel must be equipped with standard safety equipment

including the following:

• Safety glasses

• Ear protection

• Steel-toed safety boots

• Safety hard hats

• Padlocks and tags

• Appropriate meter to verify that the circuits are de-energized

(600 Vac and DC rated, minimum)

Check local safety regulations for other requirements.

Wiring Requirements

1. All wiring methods and materials shall be in accordance with the National

Electrical Code ANSI/NFPA 70. When sizing conductors and conduits

interfacing to the PV100S, both shall be in accordance with the National

Electric Code ANSI/NFPA 70, as well as all state and local code

requirements.

2. Use copper conductors only with insulation rated for 90 °C.

3. The PV100S has a three-phase output. It is marked with this symbol:

4. The AC power conductor wiring interfacing with the AC terminals in the

Transformer Enclosure are located at T6-X1, T6-X2, and T6-X3. These

terminals should be tightened to a torque value of 420 in-lbs (47.5 Nm) for

model PV100S-208 and model PV100S-480. Conductors terminated to these

terminals must use a crimp-on type ring terminal or compression-type lug.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xantrex Wechselrichter Handbücher

Xantrex

Xantrex RM1012 Bedienungsanleitung

Xantrex

Xantrex DR1512W Bedienungsanleitung

Xantrex

Xantrex 120 VAC/60 Bedienungsanleitung

Xantrex

Xantrex XPower 175 PLUS Bedienungsanleitung

Xantrex

Xantrex XW4024-120/240-60, XW4548-120/240-60,... Bedienungsanleitung

Xantrex

Xantrex XPower 1000 Bedienungsanleitung

Xantrex

Xantrex TR1512-120-60 Bedienungsanleitung

Xantrex

Xantrex XPower 150 Bedienungsanleitung

Xantrex

Xantrex XPower 5000 Bedienungsanleitung

Xantrex

Xantrex XW4024 230 50 Bedienungsanleitung

Xantrex

Xantrex RS3000 Bedienungsanleitung

Xantrex

Xantrex XPower 150 Bedienungsanleitung

Xantrex

Xantrex Freedom HF Bedienungsanleitung

Xantrex

Xantrex Freedom SW 815-2012 Bedienungsanleitung

Xantrex

Xantrex Link 10 Bedienungsanleitung

Xantrex

Xantrex PROWATT SW SW 1000 Bedienungsanleitung

Xantrex

Xantrex Prosine PS2.5 and Betriebsanleitung

Xantrex

Xantrex FREEDOM HW 1000 Bedienungsanleitung

Xantrex

Xantrex RV2012GS Bedienungsanleitung

Xantrex

Xantrex RV2012GS Bedienungsanleitung

Xantrex

Xantrex Xantrex PRO XM 1000 Bedienungsanleitung

Xantrex

Xantrex PROsine 2.0 Bedienungsanleitung

Xantrex

Xantrex XPower 3000 Bedienungsanleitung

Xantrex

Xantrex XPower 5000 Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung