Xenosys L2SWE Bedienungsanleitung
Doc. No.
F702M-L2SWEK
L2SWE
(Wireless LED HeadLight System)
User Manual
Optical Device Medical Device System Engineering
XENOSYS CO., LTD.
2, Venture-ro, 100 Beon-gil, Yeonsu-gu, Incheon 22013, Korea
TEL. 82-32-875-9811~2 FAX. 82-32-875-9813
www.xenosys.co.kr / sales@xenosys.co.kr
Wireless LED HeadLight System (L2SWE) www.xenosys.co.kr
2
Table of Contents
INTRODUCTION .............................................................................................................................3
SAFETY & PRECAUTIONS ............................................................................................................4
FEATURES ......................................................................................................................................7
COMPONENTS................................................................................................................................8
FUNCTIONS ....................................................................................................................................9
OPERATING INSTRUCTION.........................................................................................................12
BASIC TROUBLESHOOTING........................................................................................................16
SPECIFICATIONS..........................................................................................................................17
ELECTROMAGNETIC COMPATIBILITY ......................................................................................22
TRANSPORTATION......................................................................................................................22
STORAGE ......................................................................................................................................23
CLEANING INSTRUCTION...........................................................................................................24
SERVICE & WARRANTY ..............................................................................................................24
Wireless LED HeadLight System (L2SWE) www.xenosys.co.kr
3
INTRODUCTION
Wireless LED Headlight System: L2SWE is the medical device with lithium-Polymer battery and
LED light source which is suitable for flashing on to watch the wound or surgery spot. As it is
wireless can be attached to headband or glasses, it does not need long wires and fiber optic
cable. By the help of co-axial & shadow-free illumination, L2SWE provides you the excellent
color rendering with consistent brightness. The biggest feature of this product is that the size of
the irradiation area can be controlled by adjusting the illumination area adjustment knob.
This product is the medical device and KFDA approval & registration is described like below table.
Registration No.
1909
Certificate
No.
Gyeongin Jesin 07-86
Product Category I
(A) General Instruments
Class
Class 1
Product Category II
A03000 Medical Light
and Lamps
Product
Category III
A03030.01 Operating
Headlamp
Product Model No.
L2SWE
Manufacturer
Xenosys Co., Ltd.
Country of Origin
Republic of Korea
The external figure of product is like below pictures. Please refer to components on page 8~9.
Isometric View
Front View
Side View
Table A describes features of L2SW and detail specifications are described from page 17~19.
Model
Power
Spectrum
Lamp Type
L2SWE
Portable Battery
Visible
LED
Table A: L2SWE (Wireless LED Headlight System) Features
Wireless LED HeadLight System (L2SWE) www.xenosys.co.kr
4
SAFETY & PRECAUTIONS
Before the usage, you should read the manual & precautions carefully and use it properly. You
should follow next procedures and warnings about the battery & other components to prevent
any fire, injury, or damage to human body.
WARNING for Safety
1. Do not heat the product with microwave machine or oven.
2. Do not dispose the battery and LED Control Unit and battery pack into a fire.
3. The product is not waterproof (Ordinary equipment, IPX0), so avoid the humidity and water.
4. Do not use in the presence of a flammable anesthetic mixture with air, oxygen, or nitrous
oxide.
Warning for Power Unit
1. Do not use any undesignated DC power supply except Xenosys. If any damage or
unexpected hazard happens by the usage of undesignated DC power supply, the
manufacturer is NOT responsible for any damage or collapse.
2. In case of any oil spillage or liquid to inside of the product may cause fire or electric shock.
Then turn off the power immediately and disconnect the power cord.
3. Do not bend or twist the power cord excessively. It may cause fire or electric shock.
4. Do not touch the power cord with wet hand which may cause electric shock or equipment
damage.
Wireless LED HeadLight System (L2SWE) www.xenosys.co.kr
5
Warning for Main Body
1. Never disassemble or undertake modification of the equipment.
2. Do not put any metal or flammable object into the main body. It may cause fire or electric
shock.
3. Any drop or hard shock may cause the potential damage to the equipment.
4. Do not use or store the equipment in the area where get the direct ray of light, humidity, dust
or soot.
5. Clean up with a dry and soft cloth.
6. Do not use the detergent or chemical fluid to clean which may cause discoloration.
7. Avoid the reach of children or pets.
8. Maintain the following conditions for storing the product.
Environment for Storage & Transportation
Ambient Temperature
-10℃~ 40℃(14℉~ 104℉)
Relative Humidity
30 ~ 85% @ -10℃~ 40℃(14℉~ 104℉)
Pressure
860 hPa ~ 1060 hPa
WARNING for LED Lens Module
1. Do not drop, crush, or put a high pressure on LED lens module.
2. Clean LED lens surface with dipped alcohol or methanol in dry cloth softly.
3. Do not bend or twist the connection cable between the main body and LED lens module
which may cause the defective.
4. LED optic outside emits heat, so be careful on touching.
5. Do not look directly into LED lens module or some one’s eyes to avoid the risk of permanent
eye damage.
Warning for Battery Pack
Wireless LED HeadLight System (L2SWE) www.xenosys.co.kr
6
1. The battery pack for L2SWE is Lithium-Polymer rechargeable one.
2. When transporting only battery, make sure to keep it in soft case. Do not make any
conductor to connect the battery charging point.
3. The battery operating time may shorten using in the cold place (below (-10℃) even fully
charged one. In that case, warm up the battery within the pocket before using L2SW. Do
not heat up the battery with microwave or any heater.
4. Use only the charger which is provided by Xenosys.
5. Charger battery in the range of 0℃~ 40℃. It may take longer to charger the battery out of
this temperature range.
6. Provided battery can be charged and discharged about 300 times at room temperature.
Lithium-ion battery is expendables, thus if the operating time is shortened after full charge,
we recommend exchanging new battery.
7. Be careful on benzene, thinner, alcohol (volatile & flammable fluid) and water. If those
chemicals penetrate the battery, it may cause the trouble in circuit and any accident.
8. If there is any swollen battery, spill, emit, or fire, stop using immediately and contact the
distributor (dealer) or the manufacturer.
9. Never use any damaged battery and charger.
10. In case of the first installation or unused long time, then charge the battery fully before
using.
Warning for Charging
1. Do not connect any metallic objects between the cradle connector and battery. This may
cause the defective on the charger and charger cradle.
2. Use only the charger which is provided by Xenosys on the phone jack. This may cause the
defective on the charger and charger cradle.
Warning for Disposal
1. In case of careless disposal, it may pollute the environment, so make sure to separate
collection.
Wireless LED HeadLight System (L2SWE) www.xenosys.co.kr
7
FEATURES
1. Operating Principle
L2SWE adopts the way to deliver DC voltage from the battery to LED device through Step-
Down circuit and generate light speed through the lens. Even though battery voltage is
reduced, L2SWE allows LED to provide consistent brightness.
2. Electrical Rating
1) DC Power Supply: Input 100-240 V~ (50-60 Hz, 0.3 A), Output 5 V , 2.2A
2) Charger: Input-DC5V, 2.2A / Output-DC4.2V, 1.0A
3) Battery Pack (BTPWL): DC3.7V 620mAh (Lithium Polymer)
4) Battery Pack (BTPWS): DC3.7V 380mAh (Lithium Polymer)
3. Protection Classification & Type against Electric Short
1) Protection Classification: ①LED Control Unit: Battery Operated Equipment
②Medical power supply: Class II device
2) Protection: N/A
4. Safety Circuit: L2SWE contains Latching Power Switch circuit and protection circuit for over
current & overvoltage to keep the charging quantity.
5. Block Diagram: Refer to below figure.
Wireless LED HeadLight System (L2SWE) www.xenosys.co.kr
8
COMPONENTS
1. Basic Components
①Main Body(LED Control
Unit, LCUWE)
②Battery Pack
(BTPWL-2 pcs, BTPWS-2
pcs)
③Charger (LCHW)
①Medical DC Power Supply
(FW8000MUSB05)
②USB Power Cable (USBC)
③KOIKO Mini Driver(DRV18)
④L2SW Universal Clip
⑤(UGC02)
BTPWS
BTPWL
Wireless LED HeadLight System (L2SWE) www.xenosys.co.kr
9
⑥
3. Components List
No.
Components
Main Function & Description
Qty.
Reference
①
Main Body (LED Control Unit,
LCUWE)
Refer to page 9
1
②
Battery Pack (BTPWL)
Battery Pack (BTPWS)
Refer to page 10
2
2
③
Charger (LCHW)
Refer to page 11
1
④
Medical DC Power Supply
(FW8000MUSB/05)
Refer to page 11
1
⑤
USB Power Cable (USBC)
-
1
⑥
KOIKO Mini Driver (DRV18)
-
1
⑦
Universal Clip
-
1
FUNCTIONS
1. Main Body (LED Control Unit, LCUWE)
①Power ON/OFF: Operating with touch sensor and power ON/OFF for LED lens module.
②Intensity Change Switch: Adjust the brightness intensity from 1 to 3 step.
③Pogo Pin: Connect to battery output terminal.
①
③
④
⑤
②
Wireless LED HeadLight System (L2SWE) www.xenosys.co.kr
10
M2 Flat headed bolt
④Adjustable link: LED Lens module can move up-down, and left-right side.
⑤LED Lens Module (LLMW)
⑥Illumination Area Adjustment Knob: Possible to adjust the diameter size of illumination
field (ex. Ø 10 ~ Ø 82mm@WD400mm)
⑦Fix Screw hole: Bolt position for universal clip or Xenosys TTL frame or loupe fix.
※※How to install: Insert or temporarily assemble the M2
flat head bolt into the fix screw hole at the center of the
fixing bracket shown in the left figure, select the universal
clip or Loupe to be mounted, insert the selected assembly
into the mounting groove, and screw it completely with
bolts.
2. Battery Pack
①Battery Output Terminal: Assemble to pogo pin of main body
②Battery Pack(Large Quantity, BTPWL): 3.7V / 620mAh Li-Polymer
③Battery Pack(Standard, BTPWS): 3.7V / 380mAh Li-Polymer
①
②
③
Inhaltsverzeichnis
Andere Xenosys Taschenlampe Handbücher
