Xerox 220 Gebrauchsanweisung

7KH'RFXPHQW&RPSDQ\

;(52;

DC220/230/332/340ST Windows NT® 4.0 (TCP/IP) Scan to File Quick Install

Page 1 of 2

At the Repository Server:

1. Create a Repository Directory at the NT

server or NT workstation.

a) Record the TCP/IP address of the

Repository Server for later use:

_________________________________

2. Assign users and rights to the Repository

Directory.

3. Create a user account and assign a

password for the DC220/230/332/340ST

to use to log in to the Repository Server.

For NTFS drivers, Change permission to

the Repository Directory is required for the

DC220/230/332/340ST account. For the

NT4.0 server account, the Log on Locally

permission is required.

a) Record the name of the user account

and the password for later use:

_________________________________

4. Ensure that FTP services are running at

the Repository Server by running

Microsoft Internet Service Manager®:

a) Select the FTP service. From the

toolbar, select Properties > Service

Properties > Directory tab.

b) Select Add, then browse for the

Repository Directory and make this

the Home Directory for the FTP

service (Example: c/scandir).

c) Select both the Read and Write check

boxes under Access.

d) Select the OK button.

5. Test the FTP connection to the Repository

Server by logging in to the server from

another workstation, using the User Name

and Password created earlier.

6. Record the path the user account will

need to get to the Repository Directory,

i.e. [/], if you made this your Home

Directory.

_________________________________

At the DC220/230/332/340ST Control

Panel:

1. Enter System Administrator Setups:

a) Press the [Access] button on the

Control Panel.

Over

Installation Requirements:

• Be sure that the DC220/230/332/340ST is

correctly set up and configured for TCP/IP.

• The DC220/230/332/340ST Scan To File

option kit must be installed before

performing this procedure.

• For an NT server, ensure that Microsoft

Internet Information Services®(IIS) is

installed on the server.

•To install the DC220/230/332/340ST into a

DHCP environment, exclude the addresses

assigned to the DC220/230/332/340ST at

the DHCP server.

•For NT workstations, ensure that Microsoft

Peer Web Services®is installed on the

clients.

Note: Installing Microsoft IIS or Peer Web

Services requires that the server or workstation

be rebooted.

Before Installation:

Please review the DC220/230/332/340ST

Scanning Overview card before proceeding.

For assistance, contact your local Xerox Customer Support Center

602E60380

7KH'RFXPHQW&RPSDQ\

;(52;

DC220/230/332/340ST Windows NT® 4.0 (TCP/IP) Scan to File Quick Install

Page 2 of 2

g) Press [Save].

h) Press [Login Name], then press

[Edit] and use the keyboard on the

screen to enter the account name for

the DC220/230/332/340ST. Case

sensitivity applies.

i) Press [Save].

j) Press [Password], then press [Edit]

and use the keyboard on the screen to

enter the password for the DC220/

230/332/340ST. Case sensitivity

applies.

k) Press [Save].

3. Press [Save] to return to the Scan to File

Setups screen.

a) If required, press [Repository 1] to set

up Repositories 1 through 4. Follow

the steps above to enter the setup

information.

4. Press [Filing Policy]. Select the desired

Filing Policy.

5. Press [Confirmation Sheet].

a) Press [Enable].

b) Press [Save].

6. Press [Close] to return to the Scan to File

Setups screen.

7. Press [Exit].

8. The DC220/230/332/340ST will

automatically reboot and print a

configuration sheet in approximately 3

minutes.

9. Check the settings on the configuration

sheet against those that were entered

previously.

10.Install Visioneer PaperPort®software at

each client workstation.

11. Test the Scan to File feature.

12.Verify the successful scan by checking the

Confirmation Report printed by the

DC220/230/332/340ST and by checking

the Repository on the server.

Use CentreWare Internet Services®, if available

to create templates, or use the default template.

Additional information on this installation can be

found in the DC220/230/332/340ST System

Administration Guide, or the CentreWare®

manual, Getting Started with Internet Services.

b) Enter the System Administrator

password by typing #22222 (# key

and 22222) on the keypad and

pressing [Enter] on the screen.

Note: #22222 is the factory default

and may be changed by your Xerox

service representative to suit your

needs.

2. Access the Scan to File Setups screens:

a) On the screen display, press [Scan to

File Setups].

Note: The Job Template Pool and Update All

Templates options on this screen are not used in

this environment.

b) Press [Default Repository].

c) Press [TCP/IP].

d) Press [File Server IP Address], then

press [Edit] and use the keyboard on

the screen to enter the Repository

Server’s IP address.

e) Press [Save].

f) Press [Directory Path], then press

[Edit] and use the keyboard on the

screen to enter the path for the

DC220/230/332/340ST account to use

to get to the Repository Directory at

the Server.

602E60380

7KH'RFXPHQW&RPSDQ\

;(52;

DC220/230/332/340ST NetWare® 3.1x/4.1x Bindery Scan to File Quick Install

Page 1 of 2

Repository Directory:_____________________

1. Enter System Administrator Setups:

a) Press the [Access] button on the

Control Panel.

b) Enter the System Administrator

password by typing #22222 (# key

and 22222) on the keypad and

pressing [Enter] on the screen.

Note: #22222 is the factory default

and may be changed by your Xerox

service representative to suit your

needs.

2. Access the Scan to File Setups screens

and assign the Default Repository Server:

a) On the screen display, press [Scan to

File Setups].

b) Press [Default Repository].

Note: The Job Template Pool and Update All

Templates options on this screen are not used in

this environment.

c) Press [Netware].

d) Press [Server].

e) Press [Edit] and use the keyboard on

the screen to enter the name of the file

server.

f) Press [Save].

3. Assign the Default Repository Path:

a) Press [Directory Path].

b) Press [Edit] and use the keyboard on

the screen to enter the path.

Be sure to enter the full path,

including the volume name, to the

DC220/230/332/340ST account

directory

Example: vol1:\users\scan.

c) Press [Save].

4. For a Bindery installation, set the NDS

Tree and NDS Context to a dash:

a) Press [NDS Tree].

b) Press [Edit] and use the keyboard on

the screen to enter a [-] dash.

Over

Installation Requirements:

•Be sure that the DC220/230/332/340ST is

connected, configured and operational as a

Network Printer with NetWare enabled and

the correct Frame Type selected before

performing this procedure.

•The DC220/230/332/340ST Scan to File

option kit must be installed before

performing this procedure.

•Create a user account for the DC220/230/

332/340ST. Use SYSCON for NetWare 3.1x,

or NWADMIN for NetWare 4.1x/IntraNet-

Ware Bindery to create an account on the

file server for the DC220/230/332/340ST

with all access rights to the document

Repository except supervisor.

Before Installation:

Please review the DC220/230/332/340ST

Scanning Overview card before proceeding.

Record the following information for use during

setup at the DC220/230/332/340ST:

Scan User Name:________________________

Scan User Password:_____________________

File Repository Server:____________________

For assistance, contact your local Xerox Customer Support Center

602E60390

7KH'RFXPHQW&RPSDQ\

;(52;

DC220/230/332/340ST NetWare® 3.1x/4.1x Bindery Scan to File Quick Install

Page 2 of 2

7. Press [Save] to return to the Scan to File

Setups screen.

a) If required, press [Repository 1] to set

up Repositories 1 through 4. Follow

the steps above to enter the setup

information.

8. Press [Filing Policy]. Select the desired

Filing Policy.

9. Press [Save].

10.Press [Confirmation Sheet].

a) Press [Enable].

b) Press [Save].

11. Press [Close] to return to the Setups

screen.

12.Press [Exit].

13.The DC220/230/332/340ST will

automatically reboot and print a

configuration sheet in approximately 3

minutes.

14.Check the settings on the configuration

sheet against those that were entered

earlier.

15.Install Visioneer PaperPort®software at

each client workstation:

16.Test the Scan to File feature.

17.Verify the successful scan by checking the

Confirmation Report printed by the

DC220/230/332/340ST and by checking

the Repository on the server.

Use CentreWare Internet Services®, if available

to create templates, or use the default template.

Additional information on this installation

procedure can be found in the DC220/230/332/

340ST System Administration Guide or the

CentreWare®manual, Getting Started with

Internet Services.

c) Press [NDS Context].

d) Press [Edit] and use the keyboard on

the screen to enter a [-] dash.

e) Press [Save].

5. Enter the Login Name:

a) Press [Login Name].

b) Press [Edit] and use the keyboard on

the screen to enter the name of the

DC220/230/332/340ST user account.

Be sure to enter the name exactly the

same as entered on the server.

c) Press [Save].

6. Enter the User Password:

a) Press [Password].

b) Press [Edit] and use the keyboard on

the screen to enter the password

exactly the same as entered on the

server. If no password was assigned,

use the left arrow key to delete the

default password.

c) Press [Save].

602E60390

7KH'RFXPHQW&RPSDQ\

;(52;

DC220/230/332/340ST UNIX® / Other TCP/IP Scan to File Quick Install

Page 1 of 2

2. Assign users and rights to the Repository

Directory.

3. Create a user account and assign a

password for the DC220/230/332/340ST

to use to log in to the Repository Server.

a) Record the name of the user account

and the password for later use:

_________________________________

Read and Write permissions to the

Repository Directory are required for the

DC220/230/332/340ST account.

4. Ensure that FTP services are running at

the Repository Server.

5. Test the FTP connection to the Repository

Server by logging in to the server from

another workstation, using the User Name

and Password created earlier.

6. Record the path the user account will need

to get to the Repository Directory.

_________________________________

At the DC220/230/332/340ST Control

Panel:

1. Enter System Administrator Setups:

a) Press the [Access] button on the

Control Panel.

b) Enter the System Administrator

password by typing #22222 (# key

and 22222) on the keypad and

pressing [Enter] on the screen.

Note: #22222 is the factory default

and may be changed by your Xerox

service representative to suit your

needs.

2. Access the Scan to File Setups screens:

a) On the screen display, press [Scan to

File Setups].

b) Press [Default Repository].

Note: The Job Template Pool and Update All

Templates options on this screen are not used in

this environment.

c) Press [TCP/IP].

d) Press [File Server IP Address], then

press [Edit] and use the keyboard on

the screen to enter the Repository

Server’s IP address.

Over

Installation Requirements:

•Be sure that the DC220/230/332/340ST is

correctly set up and configured for TCP/IP.

•The DC220/230/332/340ST Scan To File

option kit must be installed before

performing this procedure.

•To install the DC220/230/332/340ST into a

DHCP environment, exclude the addresses

assigned to the DC220/230/332/340ST at

the DHCP server.

•Ensure that a FTP server is operating on the

network.

Before Installation:

Please review the DC220/230/332/340ST

Scanning Overview card before proceeding.

At the Repository Server:

1. Create a Repository Directory at the UNIX

or FTP server.

a) Record the TCP/IP address of the

Repository Server for later use:

_________________________________

For assistance, contact your local Xerox Customer Support Center

602E60400

7KH'RFXPHQW&RPSDQ\

;(52;

DC220/230/332/340ST UNIX® / Other TCP/IP Scan to File Quick Install

Page 2 of 2

3. Press [Save] to return to the Scan to File

Setups screen.

a) If required, press [Repository 1] to set

up Repositories 1 through 4. Follow

the steps above to enter the setup

information.

4. Press [Filing Policy]. Select the desired

Filing Policy.

5. Press [Confirmation Sheet].

a) Press [Enable].

b) Press [Save].

6. Press [Close] to return to the Scan to File

Setups screen.

7. Press [Exit].

8. The DC220/230/332/340ST will

automatically reboot and print a

configuration sheet in approximately 3

minutes.

9. Check the settings on the configuration

sheet against those that were entered

previously.

10.Install Visioneer PaperPort®software at

each client workstation.

11. Test the Scan to File feature.

12.Verify the successful scan by checking the

Confirmation Report printed by the

DC220/230/332/340ST and by checking

the Repository on the server.

Use CentreWare Internet Services®, if available

to create templates, or use the default template.

Additional information on this installation

procedure can be found in the DC220/230/332/

340ST System Administration Guide or the

CentreWare®manual, Getting Started with

Internet Services.

e) Press Save

f) Press [Directory Path], then press

[Edit] and use the keyboard on the

screen to enter the path for the

DC220/230/332/340ST account to use

to get to the Repository Directory at

the FTP Server.

Example 1:

Server Repository Directory: /scandir

FTP root directory: /scandir

Directory Path (root) is: /

Example 2:

Server Repository Directory: /ftp/scandir

FTP root directory: /ftp

Directory Path (root) is: /scandir

g) Press [Save].

h) Press [Login Name], then press

[Edit] and use the keyboard on the

screen to enter the account name for

the DC220/230/332/340ST. Case

sensitivity applies.

i) Press [Save].

j) Press [Password], then press [Edit]

and use the keyboard on the screen to

enter the password for the DC220/

230/332/340ST. Case sensitivity

applies.

602E60400

7KH'RFXPHQW&RPSDQ\

;(52;

DC220/230/332/340ST NDS® Scan to File Quick Install

Page 1 of 2

Record the following information for use during

setup at the DC220/230/332/340ST:

Scan User Name:________________________

Scan User Password:_____________________

NDS Tree:______________________________

NDS Context:___________________________

File Repository Server:____________________

Repository Directory:_____________________

Note: Scan to File requires the typefull (or fully

distinguished) NDS syntax.

Example: cn=xxx.ou=xxx.o=xxx.c=xxx.

1. Enter System Administrator Setups:

a) Press the [Access] button on the

Control Panel.

b) Enter the System Administrator

password by typing #22222 (# key

and 22222) on the keypad and

pressing [Enter] on the screen.

Note: #22222 is the factory default

and may be changed by your Xerox

service representative to suit your

needs.

2. Access the Scan to File Setups screens

and assign the Default Repository Server:

a) On the screen display, press [Scan to

File Setups].

Note: The Job Template Pool and Update All

Templates options on this screen are not used in

this environment.

b) Press [Default Repository].

c) Press [Netware].

d) Press [Server].

e) Press [Edit] and use the keyboard on

the screen to enter the name of the file

server.

f) Press [Save].

3. Assign the Default Repository Path:

a) Press [Directory Path].

b) Press [Edit] and use the keyboard on

the screen to enter the path.

Be sure to enter the full path,

including the volume name, to the

DC220/230/332/340ST account

directory.

Example: vol1:\users\scan.

c) Press [Save].

Installation Requirements:

•Be sure that the DC220/230/332/340ST is

connected, configured and operational as a

Network Printer with NetWare enabled and

the correct Frame Type selected before

performing this procedure.

•The DC220/230/332/340ST Scan To File

option kit must be installed before

performing this procedure.

•Create a user account for the DC220/230/

332/340ST. Use NWADMIN for NetWare

4.x/IntraNetWare, to create an account on

the file server for the DC220/230/332/340ST

with all access rights to the document

Repository except supervisor.

Before Installation:

Please review the DC220/230/332/340ST

Scanning Overview card before proceeding.

For assistance, contact your local Xerox Customer Support Center

602E60410 Over

7KH'RFXPHQW&RPSDQ\

;(52;

DC220/230/332/340ST NDS® Scan to File Quick Install

Page 2 of 2

6. Enter the User Password:

a) Press [Password].

b) Press [Edit] and use the keyboard on

the screen to enter the password

exactly the same as entered on the

server. If no password was assigned,

use the left arrow key to delete the

default password.

c) Press [Save].

7. Press [Save] to return to the Scan to File

Setups screen.

a) If required, press [Repository 1] to set

up Repositories 1 through 4. Follow

the preceeding steps to enter the

information.

8. Press [Filing Policy]. Select the desired

Filing Policy.

9. Press [Save].

10.Press [Confirmation Sheet].

a) Press [Enable].

b) Press [Save].

11. Press [Close] to return to the Scan to File

Setups screen.

12.Press [Exit].

13.The DC220/230/332/340ST will

automatically reboot and print a

configuration sheet in approximately 3

minutes.

14.Check the settings on the configuration

sheet against those that were entered

previously.

15.Install Visioneer PaperPort® software at

each client workstation.

16.Test the Scan to File feature.

17.Verify the successful scan by checking the

Confirmation Report printed by the

DC220/230/332/340ST and by checking

the Repository on the server.

Use CentreWare Internet Services®, if available

to create templates, or use the default template.

Additional information on this installation can be

found in the DC220/230/332/340ST System

Administration Guide, or the CentreWare®

manual, Getting Started with Internet Services.

4. Validate/edit the NDS settings:

a) Press [NDS Tree].

b) Press [Edit] and use the keyboard on

the screen to enter the name of the

NDS Tree.

c) Press [Save].

d) Press [NDS Context].

e) Press [Edit] and use the keyboard on

the screen to enter the NDS Context

name.

f) Press [Save].

5. Enter the Login Name:

a) Press [Login Name].

b) Press [Edit] and use the keyboard on

the screen to enter the name of the

DC220/230/332/340ST user account.

Be sure to enter the name exactly as it

was entered on the server.

c) Press [Save].

602E60410

Andere Handbücher für 220

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xerox Multifunktionsdrucker Handbücher

Xerox

Xerox WORK CENTRE 5325 Bedienungsanleitung

Xerox

Xerox Phaser 6020 Bedienungsanleitung

Xerox

Xerox WorkCentre 3215 Betriebsanleitung

Xerox

Xerox WorkCentre 7655 Bedienungsanleitung

Xerox

Xerox WorkCentre Pro 555 Bedienungsanleitung

Xerox

Xerox WorkCentre 3045 Bedienungsanleitung

Xerox

Xerox 700i Bedienungsanleitung

Xerox

Xerox VersaLink C405/N Bedienungsanleitung

Xerox

Xerox Document WorkCentre 480cx Technisches Handbuch

Xerox

Xerox WorkCentre 6400 Bedienungsanleitung

Xerox

Xerox 212 DC Bedienungsanleitung

Xerox

Xerox ColorQube 9201 Betriebsanleitung

Xerox

Xerox VersaLink B605 Bedienungsanleitung

Xerox

Xerox FaxCentre F2121 Bedienungsanleitung

Xerox

Xerox PHASER 8560MFP Bedienungsanleitung

Xerox

Xerox PrimeLink B9100 Bedienungsanleitung

Xerox

Xerox B1025 Service-Handbuch

Xerox

Xerox WorkCentre Pro 40 Bedienungsanleitung

Xerox

Xerox WORKCENTRE C2424 Bedienungsanleitung

Xerox

Xerox 3635MFP - Phaser B/W Laser Bedienungsanleitung

Xerox

Xerox 4150 - WorkCentre B/W Laser Bedienungsanleitung

Xerox

Xerox WORKCENTRE 7755 Bedienungsanleitung

Xerox

Xerox Phaser 8860 Bedienungsanleitung

Xerox

Xerox Phaser 6500DN Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung