Xerox Nuvera 100 Bedienungsanleitung

General Information 1-1

Chapter

1-2

LINX™ Solid Inkjet 100 Service Manual

Chapter 1

General Information

This chapter provides information and a general overview of the

LINX

Solid Inkjet 100 Printer. Theory of operation, printer specifications and

components are presented in the following sections:

General Information 1-3

General Information

The iiLINX Solid Inkjet 100 printer, shown in Figure 1-1, is a user-

installable, low maintenance, environmentally friendly, High Quality

Referral Image PostScript printer.

0388-01

Figure 1-1. The

LINX Solid Inkjet 100 Printer (shown with optional

Auxiliary Feeder Unit Assembly)

To ensure complete understanding of the Solid Inkjet 100 printer, we

recommend participation in Solid Inkjet 100 printer service training.

1-4

LINX™ Solid Inkjet 100 Service Manual

Solid Inkjet 100 Printer Overview

The Solid Inkjet 100 Printer is an Adobe PostScript Level 3 (Version

3010) grayscale, solid inkjet printer. It supports 409 x 409 dots-per-

inch (dpi) resolution at draft mode, and 600 x 600 dpi at High

Resolution Medical mode.The speed of producing images is 4.8 pages-

per-minute (ppm) in draft mode, and 2.5 ppm in High Resolution

Medical mode.

Base Solid Inkjet 100 printer

The base Solid Inkjet 100 printer features 136 built-in fonts, and is

equipped with 64 Mbytes of RAM. It can be upgraded to 128 Mbytes

of RAM by adding an optional 64 Mbyte RAM DIMM.

All printers support two available paper trays:A and A4 trays and an

optional 500-sheet high-capacity paper tray assembly give the printer

a two-tray capability.The high-capacity paper tray assembly is

usually referred to as an auxiliary feeder unit.

A 133-MHz PowerPC processor oversees print engine operations and

PostScript image processing.The printer features an integral

bidirectional parallel port (IEEE 1284C with ECP mode) and a

10baseT Ethernet port (with support for EtherTalk,TCP/IP, DHCP

and Windows Peer-to-Peer). A USB high-speed serial port is also

provided.

An optional Ethernet interface board offers a 10BaseT/100BaseT/

10Base2 Ethernet connection providing standard protocol support for

EtherTalk,TCP/IP and DHCP.When installed, this card disables the

standard 10baseT port.

A second rear panel slot accommodates an internal IDE hard drive for

DICOM support.

Solid inks

Solid inks, sometimes called phase-change inks, are solid at room

temperature and are liquid at the higher temperature used during

printing. The inks solidify almost instantly after being jetted onto the

printer’s drum. Each of the Solid Inkjet 100 printer inks is especially

formulated for this printer; the inks are not interchangeable with

other models of solid ink printers.

NOTE: Turning the printer off and allowing it to cool causes it to

perform a printhead cleaning and purge cycle upon power-up. The

printer’s purge cycle consumes a significant amount of ink.During

normal use and servicing, turn the printer off and allow it to cool only

when necessary.

General Information 1-5

Memory Considerations

The printer dual frame buffer allows for printing one image while

processing a second image (which gives greater printing throughput).

With additional RAM memory, the printer’s capabilities increase as

detailed in Table 1-1:

Table 1-1. Installed RAM and Printer Capabilities

Feature Base Additional RAM Upgrade

(64 Mbytes) (128 Mbytes)

Fast (draft) printing yes yes

High-Resolution

Medical Printing yes yes

Pipelining yes yes

DICOM Support no yes

To verify what type of RAM is installed, print the 2-page

Configuration Page from the Front Panel menu and refer to “Installed

RAM.”

For example:

Installed RAM: 64 Mbytes

Memory Slot 1: SDRAM/Non-parity/32 Mbytes/

KMMe 665 403 CTL-GO

Memory Slot 2: SDRAM/Non-parity/32 Mbytes/

16LSDT 464AG-662C1

1-6

LINX™ Solid Inkjet 100 Service Manual

Print Engine Assemblies

Internal features of the print engine are illustrated in Figure 1-2.

0388-02

Ink load

assembly

X-axis drive

and motor

Paper feed

motor

Paper/

Drum

heater

Cap/Wipe/Purge

assembly

Transfix

roller

Process

motor

Y-axis

motor

Drum

Printhead

Figure 1-2. Internal Features of the Print Engine

General Information 1-7

Seven circuit boards support the printer’s electronics. (Refer to

Figures 1-3 and 1-4).Two boards, called I/O boards, left and right,

support the front panel, solenoids and sensors.The main board

contains the printer’s CPU processor, RAM and ROM.The power

supply accepts the AC input voltage and distributes it or converts it

to various other levels of required DC voltages and distributes them.

The power control board distributes power supply voltages to the

other printer boards and drives many printer motors.The front panel

provides a user interface to the printer.The printhead drive board, a

part of the printhead, manages the signals and voltages of the

printhead’s printing elements and sensors.The optional Ethernet

interface card and internal hard drive could be considered the eighth

and ninth circuit boards.

0388-03

I/O board

right

Front

panel

Figure 1-3. Circuit Boards of the Print Engine (Right Front View)

1-8

LINX™ Solid Inkjet 100 Service Manual

0388-04

I/O board

left

Power

control

board

Printhead drive

board

Optional

Internal hard

drive

Optional

Ethernet

Interface

card

Main board

Power

supply

Figure 1-4. Circuit Boards of the Print Engine (Left Rear View)

General Information 1-9

An internal data bus, called the I2C bus, connects all I/O boards to the

main board. (Refer to Figure 1-5.) Through this single bus, the main

board can “poll” the I/O boards for the state of the printer’s sensors as

well as actuate the printer’s solenoids.This data bus greatly

simplifies the wiring that would otherwise be required for monitoring

numerous sensors and solenoids. The I2C bus also extends down to the

Auxiliary Feeder Unit.

0388-05

C bus

Auxiliary

feeder unit

connection

Figure 1-5. The Printer’s I2C Bus

1-10

LINX™ Solid Inkjet 100 Service Manual

The printer features a printhead maintenance system used to clean

the printhead faceplate and clear clogs from the printhead nozzles.

(Refer to Figure 1-6.) The system consists of a vacuum pump

assembly, the cap/wipe/purge assembly, the cap/wipe/purge carriage

drive, the purge hose and tubing, and the purge filter.

Cap/Wipe/Purge

carriage drive

Purge hose

and tubing

Purge

Filter

Cap/Wipe/Purge

assembly

Vacuum

pump

assembly

0388-06

Figure 1-6. Printhead Maintenance System

Andere Handbücher für Nuvera 100

Inhaltsverzeichnis

Andere Xerox Multifunktionsdrucker Handbücher

Xerox

Xerox Color Qube 9201 Bedienungsanleitung

Xerox

Xerox WORKCENTRE 7755 Service-Handbuch

Xerox

Xerox WorkCentre 3345 Betriebsanleitung

Xerox

Xerox WorkCentre 6505 Betriebsanleitung

Xerox

Xerox 4150S - WorkCentre B/W Laser Bedienungsanleitung

Xerox

Xerox ColorQube 9201 Bedienungsanleitung

Xerox

Xerox WorkCentre Bedienungsanleitung

Xerox

Xerox WorkCentre PE16 Bedienungsanleitung

Xerox

Xerox WorkCentre 3119 Bedienungsanleitung

Xerox

Xerox AltaLink B8145 Bedienungsanleitung

Xerox

Xerox WorkCentre 7228 Bedienungsanleitung

Xerox

Xerox WorkCentre 7346 Bedienungsanleitung

Xerox

Xerox ColorQube 8700 Betriebsanleitung

Xerox

Xerox 4150 - WorkCentre B/W Laser Bedienungsanleitung

Xerox

Xerox 3100MFPX - Phaser B/W Laser Bedienungsanleitung

Xerox

Xerox 6279 Bedienungsanleitung

Xerox

Xerox AltaLink B8045 Leitfaden

Xerox

Xerox WorkCentre 5020DN Bedienungsanleitung

Xerox

Xerox C235 Bedienungsanleitung

Xerox

Xerox WorkCentre Pro 412 Bedienungsanleitung

Xerox

Xerox 6110MFP/XN Bedienerhandbuch

Xerox

Xerox DC230LP Gebrauchsanweisung

Xerox

Xerox WORKCENTRE 7755 Technisches Handbuch

Xerox

Xerox 4150xf - WorkCentre B/W Laser Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung