Xerox WorkCentre M118i Bedienungsanleitung

Xerox WorkCentre®M118i

This guide provides a quick reference for setting up the Scan to E-mail feature on the

Xerox WorkCentre M118i. It includes procedures for:

■Enabling Scan to E-mail on page 3

■Configuring Scan to E-mail on page 3

■Verifying Scan to E-mail Setup on page 5

■Troubleshooting Scan to E-mail on page 5

ee a

so:

System Administrator Guide: Provides detailed information about setting up E-mail.

User Guide: Provides step-by-step instructions for sending E-mail.

Scan to E-mail

Quick Setup Guide

701P42574

XeroxWorkCentreM118i

Before You Begin

Before enabling and configuring Scan to E-mail:

■Verify that the machine is connected on a TCP/IP network. See the Network Connection Quick

Setup Guide for more information.

■Obtain the following information from your network administrator or Internet Service Provider (ISP):

Required:

Administrator E-mail Address

NoteNoteNote

Enter the e-mail address created for the M118i machine

in the Administrator E-Mail Address field. The email

address populates the From portion of each e-mail sent

from the M118i machine. If an email address for the

machine has not been created, enter your email

address. When an email address is created for the

machine, replace your e-mail address with the

machine’s e-mail address. See Configuring Scan to

E-mail on page 3.

____________________________________

SMTP Server Address ________ . ________ . ________ . ________

Local E-mail Address for testing ____________________________________

Optional:

DNS Server Address ________ . ________ . ________ . ________

POP3 Server Address ________ . ________ . ________ . ________

POP3 Login User Name:

__________________________________

Password:

___________________________________

Enabling Scan to E-mail

XeroxWorkCentreM118i

Enabling Scan to E-mail

To enable the Scan to E-mail feature:

1. On the control panel, press the Log In/Out button.

2. Press the Select button below the display to select System Settings.

a. Use the numeric keypad to enter the Password. The default password is 11111.

b. Press the Select button to select Confirm.

3. Select Print Settings,and then press the Enter button.

4. Press the Select button until you see Software Option on the display, and then press the Enter button.

5. Use the numeric keypad to enter the Software Option password for Scan to E-mail, and then press the

Enter button. The password can be found on the inside cover of the Scan to E-mail Instructions.

Configuring Scan to E-mail

After Scan to E-mail is enabled, follow these steps to configure Scan to E-mail on your network.

Set the Administrator E-mail Address

1. At your computer, launch your web browser.

2. Enter the machine’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click the Properties tab.

4. Select Machine Details on the left sidebar.

a. Enter the machine’s email address in the Administrator E-mail Address field. If an email address for

the machine has not been created, enter your email address. Once an email address is available for the

M118i machine, repeat Steps 1 through 5 in this procedure to replace your e-mail address with the

machine’s email address.

b. Click the Apply New Settings button at the bottom of the page.

c. Enter the CentreWare IS administrator’s User Name and Password, and then click the OK button.

Note

The default CentreWare IS administrator’s User Name is admin and Password is x-admin. These

should be changed after network setup is complete.

d. At the reboot prompt, click the Reboot button.

5. Wait one minute for the reboot to complete, and then click the browser Refresh button.

Configuring Scan to E-mail

XeroxWorkCentreM118i

Enable the E-mail Ports

1. Click the Properties tab.

2. Select Port Status on the left sidebar.

a. Enable the SNMP, Send E-mail, and Mail Notice Service ports. Do not modify the other port settings

on this page.

b. Click the Apply New Settings button at the bottom of the page.

c. At the reboot prompt, click the Reboot button.

3. Wait one minute for the reboot to complete, and then click the browser Refresh button.

Enter the SMTP Settings

1. Click the Properties tab.

2. Select the Protocol Settings folder on the left sidebar, and then select E-mail.

a. Enter the SMTP Server Address.

b. If SMTP authentication is required, enter the POP3 Server Address, POP User Name, and

POP Password.

Note

The POP3 Server Address can be entered as an IP address or a server name.

c. If the machine uses a host name rather than an IP address, click TCP/IP in the left side bar, and verify

that the DNS Address 1 field contains the DNS Server Address. For more information, see the

Network Connection Quick Setup Guide.

d. Click the Apply New Settings button at the bottom of the page.

e. At the reboot prompt, click the Reboot button.

3. Wait one minute for the reboot to complete, and then click the browser Refresh button.

Create an Address Book Entry to Use for Verifying Scan to E-mail Setup

1. Click the Properties tab.

2. Select Address Book on the left sidebar.

a. Type a Speed Dial number from 1–200 to assign to the test recipient, and then click the Edit button.

b. Select E-mail from the Address Type drop-down list.

c. Enter the recipient’s local E-mail address in the Recipient Address field.

d. Enter the Recipient Name.

e. Click the Apply New Settings button.

Verifying Scan to E-mail Setup

XeroxWorkCentreM118i

Verifying Scan to E-mail Setup

Send a test E-mail to verify the Scan to E-mail setup:

1. Load a sample document into the document feeder.

2. On the control panel, press the E-mail button.

3. Press the Address Book button.

4. In the menu, highlight the address book entry you created, and then press the Next Address button to

select it.

5. Press the Enter button.

6. Press the green Start button to scan the document and send it as an attachment to the selected recipient.

7. Verify that the recipient received the E-mail with the scanned document as an attachment.

Troubleshooting Scan to E-mail

If the machine reports an SMTP error, use the following table to determine the cause and resolution:

Possible Cause Resolution

Incorrect mail server host name ■Verify that the correct corporate or ISP mail server name has been entered in

the SMTP Host Name field.

■Ensure that DNS information is entered correctly.

Incorrect “From:” E-mail address

entered

Verify that the Administrator E-mail Address is correct. The E-mail address must

match what the corporate or ISP mail server is expecting.

The corporate or ISP mail server

requires authentication

Check with your network administrator or ISP to determine if the mail server

requires authentication. If so, use CentreWare IS to enable “POP before SMTP”

authentication, and then enter the POP User Name and POP Password

information.

The corporate or ISP mail server

does not allow mail on the

standard port number 25

Check with your network administrator or ISP to verify that Port 25 is being used for

mail service. If not, obtain the mail service port information, and then use

CentreWare IS to configure it.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xerox Multifunktionsdrucker Handbücher

Xerox

Xerox WorkCentre 7228 Service-Handbuch

Xerox

Xerox WorkCentre 5020 Betriebsanleitung

Xerox

Xerox WorkCentre Pro 165 Bedienungs- und Wartungshandbuch

Xerox

Xerox C123 Copycentre Bedienungsanleitung

Xerox

Xerox 2218 - FaxCentre B/W Laser Bedienungsanleitung

Xerox

Xerox WorkCentre Bedienungsanleitung

Xerox

Xerox B225 Bedienungsanleitung

Xerox

Xerox ColorQube 9302 Bedienungsanleitung

Xerox

Xerox Phaser 3600 Bedienungsanleitung

Xerox

Xerox 8560MFPD - Phaser Multifunction Printer Color... Bedienungsanleitung

Xerox

Xerox 3300MFP - Phaser B/W Laser Bedienungsanleitung

Xerox

Xerox WorkCentre 6505 Betriebsanleitung

Xerox

Xerox WorkCentre 4260S Bedienungsanleitung

Xerox

Xerox WorkCentre 3615 Bedienungsanleitung

Xerox

Xerox 4150 - WorkCentre B/W Laser Bedienungsanleitung

Xerox

Xerox WorkCentre 6505N Bedienungsanleitung

Xerox

Xerox Nuvera 100 Bedienungsanleitung

Xerox

Xerox B1025 Service-Handbuch

Xerox

Xerox WorkCentre M24 Color Bedienungsanleitung

Xerox

Xerox WorkCentre 3550 Bedienungsanleitung

Xerox

Xerox Phaser 3200MFP Bedienungsanleitung

Xerox

Xerox WorkCentre 3119 Bedienungsanleitung

Xerox

Xerox WorkCentre 7328 Bedienungsanleitung

Xerox

Xerox 3100MFPX - Phaser B/W Laser Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung