Xerox 2006NPC - DocuColor Color Laser Bedienungsanleitung

Xerox DocuColor 2006 22–1

Copy Features

The following copy features are available on the DocuColor 2006

copier/printer:

•Reduce/ Enlarge options

•Paper Supply options

•Original Type options

•Lighten/Darken options

•Quality Adjustment

•Advanced Features

This chapter provides detailed information about using each of these features.

Reduce/Enlarge

The Reduce/Enlarge feature allows you to increase or decrease the size of

the original image onto your copy output. Selecting a Reduce/Enlarge

percentage on the Copier Control Panel specifies a desired change in the

original image size.

The following Reduce/Enlarge options are available on your DocuColor 2006

copier/printer:

•100 % - The copy image will be the same size as the original image.

•Auto % - The DocuColor 2006 copier/printer automatically detects

original document size. After you select your desired paper output size,

the copier/printer reduces or enlarges the image to fit onto the output

paper.

22. Copy Features

Xerox DocuColor 2006

22–2

•Preset % - The Preset % settings are shown on the Copier Control

Panel. The copier/printer automatically determines output size based on

the selected reduction or enlargement percentage.

The following tables list the Preset %options available on the DocuColor

2006 and how each percentage affects certain paper sizes.

•Manual % options- The Zoom Arrow Buttons allow you to set a manual

zoom percentage between 25% and 400%. The manual zoom

percentage displays on the Copier Screen.

Using the Reduce/Enlarge feature

Follow these steps to make a copy using the Reduce/Enlarge feature:

1. If the DocuColor 2006 is in printer mode, press the Copy button to enter

copy mode.

2. Press the Clear All button to restore default settings.

3. Position the original on the Document Glass or in the Document Feeder.

For information on positioning documents on the Document Glass or using

the Document Feeder, go to the Basic Copying chapter.

Percentage Paper Sizes

64% 11 in x 17 in ➙8.5 in x 11 in

78% 8.5 in x 14 in ➙8.5 in x 11 in

129% 8.5 in x 11 in ➙11 in x 17 in

154% 5.5 in x 8.5 in ➙8.5 in x 14 in

200% 5.5 in x 8.5 in ➙11 in x 17 in

Percentage Paper Sizes

70 % A3 ➙A4

81% B4 ➙A4

86% A3 ➙B4; A4 ➙B5

115% B4 ➙A3; B5 ➙A4

141% B5 ➙B4

U.S. Preset % options International Preset % options

22. Copy Features

Xerox DocuColor 2006 22–3

4. Perform one of the following:

•Use the Reduce/Enlarge Arrow buttons to select 100 % to produce

a copy that is the same size as the original document.

•Use the Reduce/Enlarge Arrow buttons to select Auto%.

•Use the Reduce/Enlarge Arrow buttons to select a Preset %

reduce/enlarge setting.

•Use the Zoom Arrow Buttons to select a Manual % reduction or

enlargement percentage.

You can enter any percent between 25 % and 400 %.

5. If you selected Auto %, select a desired Paper Supply.

You cannot use the Auto Paper Supply feature with the Auto %

Reduce/Enlarge option. You must select a specific paper supply when using

the Auto % Reduce/Enlarge option. Information on the Paper Supply feature

is provided in the next section.

You cannot select an Enlarge value greater than 100% when Auto Paper

selected. You must select a paper size.

6. Select the desired number of copies using the Numeric Keypad.

7. Press the Start button.

22. Copy Features

Xerox DocuColor 2006

22–4

Paper Supply

The Paper Supply feature allows you to select the desired paper for your

copies.

The following Paper Supply options are available on the DocuColor 2006:

•Auto – The copier/printer automatically determines original size and the

appropriate paper supply. The copier/printer then pulls the appropriate

copy stock from paper tray 1, 2, or 3.

•Paper Trays 1, 2, and 3 – This Paper Supply option allows you to select

a paper tray loaded with the desired output size.

Selecting Paper Tray 1, 2, or 3 along with the Auto % reduce/enlarge option

prompts the DocuColor 2006 to fit the original image on the desired output

paper size. More information on using the Reduce/Enlarge feature is

provided at the beginning of this chapter.

•Bypass Tray – This option allows you load your desired output paper

into the Bypass Tray.Use this method when copying original documents

onto transparencies, labels, envelopes, postcards and other

unconventional paper stocks.

More information on using the Bypass Tray is provided later in this chapter.

Using Paper Trays 1, 2, and 3

Use the following procedure to make a copy using the paper trays 1, 2, or 3:

For instructions on loading paper trays 1, 2, or 3, go to the “Setting Up the

DocuColor 2006” chapter.

1. If the DocuColor 2006 is in printer mode, press the Copy button to enter

copy mode.

2. Press the Clear All button to restore all default settings.

3. Position the original on the Document Glass or in the Document Feeder.

For more information on positioning original documents, go to the “Basic

Copying” chapter.

22. Copy Features

Xerox DocuColor 2006 22–5

4. Use the Paper Supply Arrow Buttons to select one of the following:

•Auto

You cannot use the Auto Paper Supply feature with the Auto %

Reduce/Enlarge option. You must select a specific reduce/enlarge

percentage. Information on the Reduce/Enlarge feature is provided at the

beginning of this chapter.

•Tray 1

•Tray 2

•Tray 3

If paper is not loaded in the paper tray, the message “Add Paper to Tray X”

is displayed on the Copier Screen, where “X” is the selected tray. For

information on loading the paper tray, go to the “Loading paper in the paper

trays” procedure in the “Setting up the DocuColor 2006” chapter.

5. Select your desired number of copies using the Numeric Keypad.

6. Press the Start button.

Using the Bypass Tray

Use the Bypass Tray to copy onto unconventional paper sizes or weights,

such as postcards, transparencies or envelopes.

Loading the Bypass Tray

Use the following procedure to load the Bypass Tray:

1. Lower the Bypass Tray.

0302500A -WOL

22. Copy Features

Xerox DocuColor 2006

22–6

2. Perform one of the following:

•If loading A3 oversize paper, ensure that the blue-green, left-hand

paper guide is lowered and snapped into place.

•If loading any other size paper, lift the blue-green, left-hand paper

guide.

3. Slide the right-hand paper guide all the way to the right.

4. If you are printing on longer paper, pull out the Tray Extender.

0302501A -WOL

0302502A -WOL

0302503A -WOL

22. Copy Features

Xerox DocuColor 2006 22–7

5. Insert your paper stock into the Bypass Tray. Place the left-hand edge of

the paper stock against the left-hand paper guide.

Follow these guidelines to help minimize paper jams in the Bypass Tray:

•Do not use paper that is folded, creased or curled.

•Do not load more sheets than can fit easily under the paper

guide tab.

•Whenever possible, load paper for long edge feed.

6. Slide the right-hand paper guide to fit against your paper stock.

Pushing the paper guide to tightly against the paper stock can cause a paper

jam.

When paper stock is first loaded in the Bypass Tray, the Bypass Tray paper

selection screen automatically is displayed on the Copier Screen. For further

directions on using the Bypass Tray, go to the “Making a Copy Using the

Bypass Tray” procedure.

0302504B -WOL

0302 505A -WOL

22. Copy Features

Xerox DocuColor 2006

22–8

Loading Transparencies into the Bypass Tray

Transparencies can be fed only from the Bypass Tray or optional

Transparency Tray that goes into Tray 1 position. Use only the transparencies

specified in the DocuColor 2006 Recommended Materials List.

Leaving transparencies in the Bypass Tray can cause static build up, which

can cause a jam. Be sure to remove the transparencies when the job is

complete.

Use the following procedure to load transparencies into the Bypass Tray:

1. Fan the transparency sheets a few at a time to separate them and

prevent static.

2. Insert transparencies into the Bypass Tray until they are touching the

feeding slot. Slide the right-hand paper guide against the transparency

stack.

0302514A -WOL

22. Copy Features

Xerox DocuColor 2006 22–9

Loading Postcards into the Bypass Tray

Postcards must be fed through the Bypass Tray.

When printing on the back of pre-printed postcards, make sure that the

postcard is not bent. To avoid paper jams, flatten every bend by hand before

printing.

Use the following procedure to load postcards into the Bypass Tray:

1. Load a postcard into the Bypass Tray with the copy side face up.

2. Adjust the paper guides to fit snuggly against the postcard stack.

Use the Reduce/Enlarge feature to copy larger images onto a postcard.

0302507A -WOL

22. Copy Features

Xerox DocuColor 2006

22–10

Loading Envelopes in the Bypass Tray

All envelopes must be fed through the Bypass Tray. Open the flap and insert

the envelope, one at a time, into the Bypass Tray as shown below.

Follow these guidelines when printing onto envelopes to help minimize

potential jams and other problems:

•Do not use envelopes that have tape seals. If you are using

an envelope with a glue seal, make sure it is dry before use.

•Only use landscape (horizontal) type envelopes (more than

90 mm wide, and more than 143 mm long with the flap

open). Portrait (vertical) type envelopes may not be used.

•Insert envelopes with the flap facing out and the glue side

down.

•Poor quality envelopes may crease, and may not print

properly.

0302508A -W O L

Andere Handbücher für 2006NPC - DocuColor Color Laser

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xerox Kopierer Handbücher

Xerox

Xerox 2006NPC - DocuColor Color Laser Bedienungsanleitung

Xerox

Xerox Regal 5790 Bedienungsanleitung

Xerox

Xerox DocuColor 240 Bedienungsanleitung

Xerox

Xerox C123 Copycentre Bedienungsanleitung

Xerox

Xerox 5915 Bedienungsanleitung

Xerox

Xerox Document Centre 240 Bedienungsanleitung

Xerox

Xerox Copy Centre 518 Bedienungsanleitung

Xerox

Xerox D95 Bedienungsanleitung

Xerox

Xerox 2300 Bedienungsanleitung

Xerox

Xerox DocuColor 5799 Bedienungsanleitung

Xerox

Xerox DOCUCOLOR 12 Handbuch

Xerox

Xerox DOCUCOLOR 12 Handbuch

Xerox

Xerox XC356 - Home Office Copier Bedienungsanleitung

Xerox

Xerox D95 Bedienungsanleitung

Xerox

Xerox Wide Format 6204 Bedienungsanleitung

Xerox

Xerox 5760 Bedienungsanleitung

Xerox

Xerox DocuColor 3535 Bedienungsanleitung

Xerox

Xerox 2006NPC - DocuColor Color Laser Betriebsanleitung

Xerox

Xerox WorkCentre Pro 423 Bedienungsanleitung

Xerox

Xerox DocuColor DocuColor 4 Bedienungsanleitung

Xerox

Xerox CopyCentre C32 Color Handbuch

Xerox

Xerox Document Centre 470cx Technisches Handbuch

Xerox

Xerox XC811 Bedienungsanleitung

Xerox

Xerox DocuColor 5750 Bedienungsanleitung

Beliebte Kopierer Handbücher anderer Marken

Canon

Canon iR1210 Referenzhandbuch

Ricoh

Ricoh FW740 Bedienungsanleitung

Minolta

Minolta CF910 Bedienungsanleitung

Ricoh

Ricoh B003 Bedienungsanleitung

Oce

Oce 9800 Bedienungsanleitung

Olivetti

Olivetti d-Copia 1800 Bedienungsanleitung

Minolta

Minolta Di181 Bedienungsanleitung

Canon

Canon iR5000i Bedienungsanleitung

Telecrane

Telecrane F25 Bedienungsanleitung

Canon

Canon NP6317 Anleitung zur Verwendung

Sharp

Sharp AR-5015 N Bedienungsanleitung

Ricoh

Ricoh Di-C1 Bedienungsanleitung

Mita

Mita MIP-2400 Handbuch

Sharp

Sharp AL-2061 Bedienungsanleitung

Muratec

Muratec MFX-C2280 Bedienungsanleitung

Ricoh

Ricoh FT5034C Bedienungsanleitung

Minolta

Minolta EP4000 Bedienungsanleitung

Ricoh

Ricoh V-C3 Installationsanleitung