Xerox Nuvera 100 Montageanleitung

Software Version 10.0

4 November 2009

701P49974

Xerox Nuvera®

Hints and Tips Guide

Xerox Nuvera 100/120/144 EA/MX Production System

Xerox Nuvera 200/288 EA/MX Perfecting Production System

FreeFlow® are trademarks of Xerox Corporation in the United States and/or other countries.

Changes are periodically made to this document. Technical inaccuracies and typographic errors will be corrected in

subsequent editions.

Document Version: 10.01 (November 4 2009).

Table of Contents

Preface....................................................................................................................... v

.......................................................................................................vGeneral Purpose and Audience

1Software Versions....................................................................................1-1

2New Capabilities in Version 10.0 Software....................................2-1

3Release Issues ...........................................................................................3-1

...................................................................................................................................3-1Issues resolved

....................................................................................3-2New issues in this release for DS3500

CQ#46637 “Close top cover” status does not consistently disappear after

closing the top cover...........................................................................................................3-2

........................................................3-2CQ#46832 Stacker state changes incorrectly

...............3-2CQ#446828 “Run until full” option conflicts with Dual-DS3500’s

................................................................................3-3Issues remaining from previous release

...........................................................................3-3CQ#43933 Unable to Eject CD Tray

............................3-3CQ#45919 Tray Programming Reverts to Default Settings

...........................................................................................................3-3CQ#45544 Build Job

............................................3-3CQ#43471 Skewed Inserts with Xerox Tape Binder

..................................................................................................3-4CQ#43522 Annotation-1

..................................................................................................3-4CQ#43522 Annotation-2

................................................................................3-4CQ#44256 Configuration Backup

................................................3-4CQ#44223 PDF and HTML Files Viewed from CD

..................3-5CQ#44186 Recognizing Indication of Successfully Proofed Job

.................3-6CQ#43933 Unable to Eject or Read CD From GUI or CD Button

...................................................................3-6CQ#38117 Short Edge Feed 9x11 Stock

Hints and Tips Guide iii

Preface

General Purpose and Audience

This document for the Xerox Nuvera contains the following information:

•Software release deliverables and version numbers

•New features in this release

•Issues resolved in this release

•New issues present in this release

•Known operating limitations that are to be resolved in a future release

Standard system operating procedures and information can be found in the following

documentation:

•For specific information about system operations, performance and features, refer to the

Xerox Nuvera User Guide and Training Aid.

•For connectivity topics and DFA configuration management, refer to the Xerox Nuvera

System Administrator’s Guide as well as the DFA Resource Guide.

•For print driver installation, supported print drivers, and common issues with the Xerox

FreeFlow® Print Server print driver functionality, refer to the CentreWare Printer Drivers

Guide. New print drivers are available at www.xerox.com.

•For LCDS specific information, refer to the LCDS User Guide.

•For more detail on IPDS functionality refer to the FreeFlow Print Server IPDS User Guide.

Hints and Tips Guide v

Preface Xerox Nuvera

[This page left intentionally blank]

vi Hints and Tips Guide

1Software Versions

This document references the following software versions:

Item Version Number

Free Flow Print Server 7.0 SP3 / Tigris

System software

RV.10.0.27.04

CP.7393.43

IPDS (must match DocuSP version) CP. 7393.43

FreeFlow Print Server 7.0 SP3 Remote

Workflow *

CP.7393.43 (English)

CP.70.90.62 (Multinational)

FreeFlow Print Server 7.0 SP3 and

Variable Input version

FreeFlow Print Server 7.0 SP1 Includes Variable Input

(VI) and Variable Print Manager (VPM) version 5.0.

VIPP Version VIPP Project Container is known as the FreeFlow VI

Project Container.

Drivers ** 100/120/144/200/288 EA/MX DPS

CD Release version: 02.073.09

Windows Driver: 5.138.3.0

Mac Driver: 7.0.6 (497)

FreeFlow Print Server 7.0 SP1 x86

System Restore

CP.5162.93 01-July-2007

* Note

Since the Xerox software supports the current release and two past major releases,

DocuSP Remote Workflow 5.1 software supports DocuSP versions 4.1, 4.2, 5.0, and 5.1. If

an earlier version of DocuSP is being used, you can install an older version of DocuSP

Remote Workflow. DocuSP Remote Workflow 5.0 software supports DocuSP versions 4.1,

4.2 and 5.0. Version 3.8 will no longer be visible to the 5.0 DRW software. Alternatively,

you can run two applications on the desktop.

** Note

The print drivers included with the system support Microsoft Windows Vista. Check the

driver download page at www.xerox.com for print driver documentation.

Hints and Tips Guide 1-1

2New Capabilities in

Version 10.0

Software

The following is a list of new capabilities enabled with version 10.0 software:

•Availability of the new Xerox Nuvera 200/288 MX Perfecting Production System

configurations. These are dual engine configurations, similar to the Xerox Nuvera®

200/288 EA Perfecting Production System, but with support for MICR printing. These

systems operate at speeds up to 200/288 impressions per minute in the duplex mode

(100/144 IPM simplex), and with 11x17 / A3 speeds of up to 120/144 duplex impressions

per minute. The primary fit for the system is a MICR-capable printing environment

running high print volumes with a high percentage of duplex pages.

•Enablement of easier customer maintenance actions via ‘wizards’, in support of the ‘Xerox

Productivity Plus Basic’ program.

•Added a generic Icon for DFA devices onto the Machine graph. This will assist in

differentiating faults between DFA devices and BFM/DS3500 finishers. When faults occur

on a DFA device, the Fault Icon will appear above the DFA Icon instead of above the

BFM/DS3500.

•The new DS3500 is a stacking device that also enables other inline finishing by providing

document transport capability and full DFA support to DFA compliant finishing devices.

•Profiles for new DFA devices introduced after a software release can now be downloaded

to connected machines. If a user purchases a new DFA device, the profile is already loaded

on the machine enabling immediate use of the new device.

•Introduced an Alternating Set Mode for machines with dual stackers (Dual BFM). This

mode will alternate the destination of the sets of the job between the 2 stackers,

eliminating the wait times for the sets to go to the stacker. This mode is most beneficial

for small sets to dual BFM by greatly increasing productivity of these types of jobs.

Hints and Tips Guide 2-1

Andere Handbücher für Nuvera 100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xerox Drucker Handbücher

Xerox

Xerox Phaser 6022 Betriebsanleitung

Xerox

Xerox Phaser 7750 Bedienungsanleitung

Xerox

Xerox DocuPrint C2535 A Bedienungsanleitung

Xerox

Xerox DocuPrint N4525 Betriebsanleitung

Xerox

Xerox Phaser 140 Bedienungsanleitung

Xerox

Xerox Phaser 6125 Bedienungsanleitung

Xerox

Xerox Phaser 6120 Bedienungs- und Sicherheitshinweise

Xerox

Xerox DocuTech 180 Bedienungsanleitung

Xerox

Xerox DocuPrint N24 Gebrauchsanweisung

Xerox

Xerox DocuPrint XJ6C Bedienungsanleitung

Xerox

Xerox Phaser 3250 Bedienungsanleitung

Xerox

Xerox Phaser 8400 Installations- und Betriebsanleitung

Xerox

Xerox Phaser 6300 Bedienungsanleitung

Xerox

Xerox DocuColor 2060 IPS Administratorhandbuch

Xerox

Xerox 3600DN - Phaser B/W Laser Printer Kurzanleitung

Xerox

Xerox Phaser 3400 Bedienungsanleitung

Xerox

Xerox VersaLink C415 Bedienungsanleitung

Xerox

Xerox 8560DT - Phaser Color Solid Ink Printer Bedienungsanleitung

Xerox

Xerox Phase 6200 Technische Daten

Xerox

Xerox DocuMate 700 Bedienungsanleitung

Xerox

Xerox B310 Bedienungsanleitung

Xerox

Xerox 6100BD - Phaser Color Laser Printer Bedienungsanleitung

Xerox

Xerox C230 Bedienungsanleitung

Xerox

Xerox Phaser 3250 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung