Xerox Phaser 6115 MFP Bedienungsanleitung

Service Manual

Phaser®6115MFP

701P28980

Color Laser Multifunction Product

Service Manual

701P28980

Phaser®6115MFP

Color Laser Multifunction Product

arn

The following servicing instructions are for use by qualified service

personnel only. To avoid personal injury, do not perform any servicing

other than that contained in the operating instructions, unless you are

qualified to do so.

Revised: Jan 2008

ii Phaser 6115MFP Multifunction Product Service Manual

publication may not be reproduced in any form without permission of Xerox Corporation.

Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter

granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen

displays, looks, etc.

XEROX®, The Document Company®, the digital X®, CentreWare®, infoSMART®,Made For Each Other®, PagePack™, Phaser®, PhaserSMART®, and

Walk-Up™ are trademarks of Xerox Corporation in the United States and/or other countries.

Acrobat®, Adobe®Reader®, Adobe Type Manager®, ATM™, Illustrator®, PageMaker®, Photoshop®, PostScript®, Adobe Brilliant®Screens, Adobe

Garamond®, Adobe Jenson™, Birch®, Carta®, IntelliSelect®, Mythos®, Quake®, and Tekton®are trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

Apple®, AppleTalk®, EtherTalk®, LaserWriter®, LocalTalk®, Macintosh®, Mac OS®, TrueType®, Apple Chancery®, Chicago®, Geneva®, Monaco®, New

York® , and QuickDraw®are trademarks of Apple Computer, Inc. in the United States and/or other countries.

HP-GL®, HP-UX®, and PCL®are trademarks of Hewlett-Packard Corporation in the United States and/or other countries.

IBM®and AIX®are trademarks of International Business Machines Corporation in the United States and/or other countries.

Windows®, Windows NT®, Windows Server™, and Wingdings®are trademarks of Microsoft Corporation in the United States and/or other countries.

Novell®, NetWare®, NDPS®, NDS®, Novell Directory Services®, IPX™, and Novell Distributed Print Services™are trademarks of Novell, Incorporated in

the United States and/or other countries.

SunSM, Sun Microsystems™, and Solaris®are trademarks of Sun Microsystems, Incorporated in the United States and/or other countries.

SWOP® is a trademark of SWOP, Inc.

UNIX®is a trademark in the United States and other countries, licensed exclusively through X/Open Company Limited.

As an ENERGY STAR®partner, Xerox Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY

STAR name and logo are registered U.S. marks.

PANTONE®Colors generated may not match PANTONE-identified standards. Consult current PANTONE Publications for accurate color. PANTONE®and

other Pantone, Inc. trademarks are the property of Pantone, Inc. © Pantone, Inc., 2000.

Phaser 6115MFP Multifunction Product Service Manual iii

Service Terms

Manual Terms

Various terms are used throughout this manual to either provide additional

information on a specific topic or to warn of possible danger present during a

procedure or action. Be aware of all symbols and terms when they are used,

and always read NOTE, CAUTION, and WARNING statements.

Common Acronyms:

The following list defines the acronyms that may be found in this manual.

A note indicates an operating or maintenance procedure, practice or

condition that is necessary to efficiently accomplish a task.

A note can provide additional information related to a specific subject or

add a comment on the results achieved through a previous action.

Caution

A caution indicates an operating or maintenance procedure, practice or

condition that, if not strictly observed, results in damage to, or destruction

of, equipment.

arn

A warning indicates an operating or maintenance procedure, practice or

condition that, if not strictly observed, results in injury or loss of life.

Product Terms

Caution: A personal injury hazard exists that may not be apparent. For

example, a panel may cover the hazardous area.

Danger: A personal injury hazard exists in the area where you see the sign.

ADC: Automatic Density Control FRU: Field Replaceable Unit

BTR: Bias Transfer Roller IPB: Image Processor Board

CTD: Toner Density Control IU: Imaging Unit

ECB: Engine Control Board NCS: Non-Contact Sensor

ESD: Electrostatic Discharge PL: Corresponds to the FRU Parts List.

iv Phaser 6115MFP Multifunction Product Service Manual

Symbols Marked on the Product

Hot surface on or in the printer. Use caution to avoid personal

injury.

Do not touch the item.

Use caution (or draws attention to a particular component). Refer

to the manual(s) for information.

Phaser 6115MFP Multifunction Product Service Manual v

Power Safety Precautions

Power Source

For 115 VAC printers, do not apply more than 135 volts RMS between the

supply conductors or between either supply conductor and ground. For 230

VAC printers, do not apply more than 254 volts RMS between the supply

conductors or between either supply conductor and ground. Use only the

specified power cord and connector. This manual assumes that the reader is

a qualified service technician.

Plug the three-wire power cord (with grounding prong) into a grounded AC

outlet only. If necessary, contact a licensed electrician to install a properly

grounded outlet. If the product loses its ground connection, contact with

conductive parts may cause an electrical shock. A protective ground

connection by way of the grounding conductor in the power cord is essential

for safe operation.

Disconnecting Power

arn

Turning the power off using the power switch does not completely de-

energize the printer. You must also disconnect the power cord from the

printer’s AC inlet. Disconnect the power cord by pulling the plug, not the

cord.

Disconnect the power cord in the following cases:

■if the power cord or plug is frayed or otherwise damaged,

■if any liquid or foreign material is spilled into the product,

■if the printer is exposed to any excess moisture,

■if the printer is dropped or damaged,

■if you suspect that the product needs servicing or repair,

■whenever you clean the product.

Moving the Printer

Follow these guidelines to avoid injuring yourself or damaging the printer:

■Do not place any food or liquids on the printer.

■Turn off the printer and unplug all power cables before moving the printer.

vi Phaser 6115MFP Multifunction Product Service Manual

■Always lift the printer from the designated lift points.

Caution

Damage to the printer resulting from improper moving or failure to

repackage the printer properly for shipment, is not covered by the

warranty, service agreement, or Total Satisfaction Guarantee. The

Total Satisfaction Guarantee is available in the United States and

Canada. Coverage may vary outside these areas; please contact your

local representative for details.

s6115-418

Phaser 6115MFP Multifunction Product Service Manual vii

Electrostatic Discharge (ESD) Precautions

Some semiconductor components, and the respective sub-assemblies that

contain them, are vulnerable to damage by Electrostatic discharge (ESD).

These components include Integrated Circuits (ICs), Large-Scale Integrated

circuits (LSIs), field-effect transistors and other semiconductor chip

components. The following techniques will reduce the occurrence of

component damage caused by static electricity.

Be sure the power is off to the chassis or circuit board, and observe all other

safety precautions.

■Immediately before handling any semiconductor components assemblies,

drain the electrostatic charge from your body. This can be accomplished

by touching an earth ground source or by wearing a wrist strap device

connected to an earth ground source. Wearing a wrist strap will also

prevent accumulation of additional bodily static charges. Be sure to

remove the wrist strap before applying power to the unit under test to

avoid potential shock.

■Do not remove a replacement component or electrical sub-assembly from

its protective package until you are ready to install it.

■After removing a static sensitive assembly (such as a PCB board or an

NVRAM) from its anti-static bag, place it on a grounded conductive

surface. If the anti-static bag is conductive, you may ground the bag and

use it as a conductive surface.

■Do not use freon-propelled chemicals. These can generate electrical

charges sufficient to damage some devices.

■Immediately before removing the protective material from the leads of a

replacement device, touch the protective material to the chassis or circuit

assembly into which the device will be installed.

■Minimize body motions when handling unpacked replacement devices.

Motion such as your clothes brushing together, or lifting a foot from a

carpeted floor can generate enough static electricity to damage an

electro-statically sensitive device

■Handle IC’s and EPROM’s carefully to avoid bending pins.

■Pay attention to the direction of parts when mounting or inserting them on

Printed Circuit Boards (PCB’s).

viii Phaser 6115MFP Multifunction Product Service Manual

Service Safety Summary

General Guidelines

For qualified service personnel only: Refer also to the preceding Power Safety

Precautions.

Avoid servicing alone: Do not perform internal service or adjustment of this

product unless another person capable of rendering first aid or resuscitation is

present.

Use care when servicing with power: Dangerous voltages may exist at several

points in this product. To avoid personal injury, do not touch exposed

connections and components while power is on. Disconnect power before

removing the power supply shield or replacing components.

Do not wear jewelry: Remove jewelry prior to servicing. Rings, necklaces and

other metallic objects could come into contact with dangerous voltages and

currents.

Warning Labels

Read and obey all posted warning labels. Throughout the printer, warning

labels are displayed on potentially dangerous components. As you service the

printer, check to make certain that all warning labels remain in place.

Safety Interlocks

Make sure all covers are in place and all interlock switches are functioning

correctly after you have completed a printer service call. If you bypass an

interlock switch during a service call, use caution when working on or around

the printer.

CLASS 1 LASER PRODUCT

The Phaser 6115MFP Multifunction Product is certified to comply with Laser

Product Performance Standards set by the U.S. Department of Health and

Human Services as a Class 1 Laser Product. This means that this product

does not emit hazardous laser radiation; which is possible only because the

laser beam is totally enclosed during all modes of customer operation. When

servicing the printer or laser unit, follow the procedures specified in this

manual and there will be no hazards from the laser.

Andere Handbücher für Phaser 6115 MFP

Inhaltsverzeichnis

Andere Xerox Drucker Handbücher

Xerox

Xerox Phaser 6110N Bedienungsanleitung

Xerox

Xerox 8400B - Phaser Color Solid Ink Printer Installations- und Benutzerhandbuch

Xerox

Xerox VersaLink C620 Bedienungsanleitung

Xerox

Xerox 7400DT - Phaser Color LED Printer Bedienungsanleitung

Xerox

Xerox Phaser 6000 Bedienungsanleitung

Xerox

Xerox Phaser 4510 Installations- und Benutzerhandbuch

Xerox

Xerox B210 Bedienungsanleitung

Xerox

Xerox Phaser 6000 Bedienungsanleitung

Xerox

Xerox PHASER 3500 Bedienungsanleitung

Xerox

Xerox WorkCentre M24 Color Bedienungsanleitung

Xerox

Xerox Phaser 4500B Bedienungsanleitung

Xerox

Xerox Nuvera Bedienungsanleitung

Xerox

Xerox Color 560 Printer Bedienungsanleitung

Xerox

Xerox PHASER 6250 Montage- und Wartungsanleitung

Xerox

Xerox DOCUCOLOR 12 Montageanleitung

Xerox

Xerox Phaser 3010 Bedienungsanleitung

Xerox

Xerox Phaser 8500 Bedienungsanleitung

Xerox

Xerox PHASER 6140 Bedienungsanleitung

Xerox

Xerox WorkCentre Pro 412 Bedienungsanleitung

Xerox

Xerox Color 1000i Press Leitfaden

Xerox

Xerox Phaser 8560 Service-Handbuch

Xerox

Xerox Phaser 6125 Bedienungsanleitung

Xerox

Xerox Phaser 6500 Bedienungsanleitung

Xerox

Xerox WorkCentre 4260 Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung