Xerox Phaser 6200N Bedienungsanleitung

Phaser®6200 Color Laser Printer

Connection Setup

You can connect the printer to your computer in one of the following ways.

■Parallel

■USB

■Network

For information about connecting to a network, view the the Connection Setup printable page, which is

stored in your printer along with other helpful printable pages. The following pages show the

Connection Setup printable page.

All the printable pages have this format, with color bars at the top and at the bottom of the page. Print

these pages at the printer’s front panel.

For detailed information about connecting to a network, refer to the Networking Guide on the

Interactive Documentation CD-ROM.

Accessing printable pages

Access these pages from the Printable Pages Menu:

1. At the front panel, scroll to the Printable Pages Menu using the Down Arrow or

Up Arrow key and press the OK key.

2. Scroll to the desired printable page (such as Connection Setup) using the Down Arrow or

Up Arrow key and press the OK key.

Menu Map

For a complete list of printable pages, print the Menu Map:

1. Select Menus on the front panel and press the OK key.

2. Select Print Menu Map and press the OK key.

6200-51

PHASER®6200 COLOR PRINTER

Connection Setup

Page 1 of 3

USB Connection

The USB connection requires a standard A/B USB cable. The "A" end of the cable connects to the computer's USB port;

the "B" end connects to the printer's USB port.

Windows 98 or later

Connect the USB cable to the PC and follow the Add New Hardware Wizard to create the USB port. Follow the Add

Printer Wizard to install the printer driver from your printer's software CD-ROM. For more details, refer to the infoSMART

Knowledge Base at www.xerox.com/officeprinting/infoSMART, Document # 18215.

Macintosh (requires OS 9.0.4 or later)

A USB-connected printer will not show in the Chooser. Install the printer driver from your printer's software CD-ROM. Use

the Desktop Printer Utility (version 1.2 or later) to create a desktop USB printer. The utility is located in the PhaserTools

folder created during the software install. For more details, refer to the infoSMART Knowledge Base at

www.xerox.com/officeprinting/infoSMART, Document # 33225.

Parallel Connection

The printer's parallel connection uses a parallel cable to connect your computer's parallel port to the printer's parallel port.

Install the printer driver from your printer's software CD-ROM. Select the appropriate LPT parallel port.

Ethernet Connection (recommended)

Network

Use an Ethernet connection with two twisted-pair (Category 5/RJ-45) cables and an Ethernet hub. Connect the computer

to the hub with one cable and connect the printer to the hub with the second cable. Use any port on the hub except the

uplink port. TCP/IP and EtherTalk are the most common protocols used with Ethernet cables. To print using TCP/IP, each

computer and the printer requires a unique IP address. See Setting IP Addresses.

Standalone Use

Use a crossover cable to connect the printer directly to the computer via the Ethernet port.

Setting an IP address

If your computer is on a large network, contact your network administrator for the appropriate TCP/IP addresses and

additional configurations.

If you are creating your own small Local Area Network, or connecting the printer directly to your computer over Ethernet,

use this basic procedure. The printer and computer(s) should have unique IP addresses. It is important that the addresses

are similar, but not the same. For example, your printer can have the address 192.168.1.2 while your computer has the

address 192.168.1.3. Another device can have the address 192.168.1.4, and so on.

For more details, refer to the infoSMART Knowledge Base at www.xerox.com/officeprinting/infoSMART, 

Document # 18545.

Note: If you use the installer from your printer's software CD-ROM, the IP Address is set automatically.

To manually set the printer's IP address:

1. At the printer's front panel, select Menus and press OK.

2. Scroll to the Connection Setup Menu and press OK.

3. Scroll to TCP/IP Address Menu and press OK.

4. Scroll to DCHP/BootP and press OK until it displays OFF.

5. Scroll to TCP/IP Address and press OK.

6. Enter an IP address like the example above.

7. Scroll to TCP/IP Network Mask and press OK.

8. Enter a network (subnet) address. (If you use the IP address in the above example, 

set a Subnet Mask of 255.255.255.0)

9. Scroll to TCP/IP Gateway and press OK.

10. Enter a Gateway (router) address. (If you use the IP address in the above example, 

set a Gateway address of 192.168.1.1)

11. Scroll to Exit and press OK.

To set a static IP address on your computer:

Windows 95/98/Me

1. From the Start menu, right-click Network Neighborhood and select Properties.

2. On the Configuration tab, select the TCP/IP protocol for your network card, then select Properties.

3. On the IP Address tab, select Specify an IP address. Enter an IP address and Subnet Mask, and click OK. 

(If you use the IP address noted above, set a Subnet Mask of 255.255.255.0).

4. Click OK and restart Windows.

Windows 2000/XP

1. From the Start menu, right-click My Network Places and select Properties.

2. Right-click Local Area Connection and select Properties.

3. If you do not have TCP/IP available, you should first click Add and select Protocol. Click Add and select 

Internet Protocol TCP/IP.

4. On the General tab, select the TCP/IP protocol for your network card. Click Properties.

5. On the General tab, select Use the following IP address. Enter an IP address and Subnet Mask, and then click 

OK. (If you use the IP address in the above example, set a Subnet Mask of 255.255.255.0).

6. Click OK and restart Windows, if prompted.

Windows NT 4.x

1. From the start menu, right-click Network Neighborhood and select Properties.

2. On the Protocols tab, select TCP/IP Protocol and click Properties.

3. On the IP Address tab, select Specify an IP Address. Enter an IP Address and Subnet Mask in the field and 

click OK. (If you use the IP address noted above, set a Subnet Mask to 255.255.255.0.)

4. Click OK and restart Windows.

Page 2 of 3

Installing the Printer Driver

To download the latest printer drivers, access the Xerox web site at: www.xerox.com/officeprinting/support.

Windows 95/98/Me, Windows 2000/XP, and Windows NT 4.x

Install the printer driver from your printer's software CD-ROM. The software CD-ROM installer automatically installs 

and identifies the printer during the installation process.

For more details, refer to the infoSMART Knowledge Base at www.xerox.com/officeprinting/infoSMART, Document 

# 9178 for Windows 95/98/Me, Document # 36894 for Windows 2000, and Document # 11338 for Windows NT.

Macintosh

EtherTalk

If you use EtherTalk, Macintosh computers do not require IP addresses.

1. Open the AppleTalk Control Panel.

2. Verify that the Ethernet port is the selected network port.

3. To install the printer driver, double-click the installer on your printer's software CD-ROM.

4. Open the Chooser, select the LaserWriter driver.

5. From the right column of the Chooser, select the printer. Click Create to create the desktop printer.

For more details, refer to the infoSMART Knowledge Base at www.xerox.com/officeprinting/infoSMART, 

Document # 2562.

Macintosh OS X

Macintosh OS X supports TCP/IP as the default protocol, as well as AppleTalk. For a TCP/IP installation, 

follow the instructions provided to set an IP address in the printer.

1. Open the Print Center Utility.

2. Select the Add Printer... button.

3. Choose the connection type you desire.

For LPR, enter the IP address of the printer that you set previously. The Queue Name field can remain blank if the Use

default queue on server box is checked (by default). Other options are PS, or AUTO. Select the appropriate PPD for

the printer model under the Printer Model pull-down menu.

For AppleTalk, select the appropriate printer from the list that is displayed. The printer should autoconfigure at this point.

Note: You may need to enable AppleTalk via the Network Control Panel. Follow the onscreen instructions provided.

Other Resources

For more information on network setup and troubleshooting, refer to the Networking section of the 

Interactive Documentation CD-ROM.

Page 3 of 3

Andere Handbücher für Phaser 6200N

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xerox Drucker Handbücher

Xerox

Xerox Phaser 200I Bedienungsanleitung

Xerox

Xerox DocuColor 2045 Bedienungsanleitung

Xerox

Xerox Phaser 550 Bedienungsanleitung

Xerox

Xerox Phaser 6280 Bedienungsanleitung

Xerox

Xerox Phaser 7100 Bedienungsanleitung

Xerox

Xerox DocuPrint 180 Bedienungsanleitung

Xerox

Xerox B210 Bedienungsanleitung

Xerox

Xerox 6180N - Phaser Color Laser Printer Bedienungsanleitung

Xerox

Xerox VersaLink C600N Bedienungsanleitung

Xerox

Xerox Wide Format 6050 Bedienungsanleitung

Xerox

Xerox PHASER 6140 Bedienungs- und Wartungshandbuch

Xerox

Xerox WorkCentre 3315 Betriebsanleitung

Xerox

Xerox Phaser 6100DN Bedienungsanleitung

Xerox

Xerox Phaser 6200 Bedienungsanleitung

Xerox

Xerox VersaLink C620 Bedienungsanleitung

Xerox

Xerox DocuPrint 4850 NPS/IPS Bedienungsanleitung

Xerox

Xerox 3250D - Phaser B/W Laser Printer Bedienungsanleitung

Xerox

Xerox WorkCentre 6515 Bedienungsanleitung

Xerox

Xerox Phaser 3115 Bedienungsanleitung

Xerox

Xerox Phaser 6280 Bedienungsanleitung

Xerox

Xerox DocuPrint C55 Handbuch

Xerox

Xerox C11 - DocuPrint Color Inkjet Printer Bedienungsanleitung

Xerox

Xerox WorkCentre 4265 Service-Handbuch

Xerox

Xerox DocuPrint N24 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung