Xirgo XT1520 Bedienungsanleitung

XT1520 Product Manual

Page 1 | 10

CONFIDENTIAL AND PROPRIETARY

XT1520

Product Manual

Firmware Version: NV11.1125AA1

Revised July 06, 2020

XT1520 Product Manual

Page 2 | 10

CONFIDENTIAL AND PROPRIETARY

TABLE OF CONTENTS

1. Functional Description 3

1.1. Overview 3

1.2. Mechanical 3

2. General Operation 4

3. Installation 5

4. Bluetooth (BLE) 6

4.1. UID Frame 6

4.2. TLM Frame 6

5. Bluetooth protocol Diagram 7

6. Regulatory Statements 8

6.1. FCC 8

6.2. IC 9

6.3. CE 9

XT1520 Product Manual

Page 3 | 10

CONFIDENTIAL AND PROPRIETARY

1. FUNCTIONAL DESCRIPTION

1.1. OVERVIEW

The XT1520 series are Bluetooth beacons with a single chip Bluetooth 5 + ARM. The beacons allow the user to

quickly identify a cart's location if it is within proximity of an XT49xx to determine whether a cart is at a

distribution center or en route. Each device broadcasts a UID frame payload with a MAC address to an XT49xx at

a 1 Hz frequency. This frequency, along with the namespace, are only configurable at the factory. The device is

expected to last the duration of the cart's life.

1.2. MECHANICAL

Mechanical

Dimensions 4.0 x 2.2 x 1.3 in (10.16 x 5.59 x 3.30 cm)

Weight 3.8 oz

Case Material PC+PBT

IP Rating IP67

Vibration Mil. Std. 202G, SAE J1455

XT1520 Product Manual

Page 4 | 10

CONFIDENTIAL AND PROPRIETARY

2. GENERAL OPERATION

The XT1520 attaches to Amazon carts and is used in conjunction with an XT49xx mounted on an Amazon trailer.

The XT49xx periodically captures the unique device IDs at a configurable rate of all beacons in range. The XT49xx

then sends the information over the cellular network, which is received by AWS.

XT1520 Product Manual

Page 5 | 10

CONFIDENTIAL AND PROPRIETARY

3. INSTALLATION

The XT1520 offers two different means of mounting: zip ties, or 3M VHB tape. The back of the device casing is flat

so the VHB tape can be adhered. The holes zip ties are indicated below.

XT1520 Product Manual

Page 6 | 10

CONFIDENTIAL AND PROPRIETARY

4. BLUETOOTH (BLE)

The XT1520 uses Bluetooth 5 network, utilizing the Eddystone(TM) message protocol from Google. This protocol

has four frame types: UID, URL, TLM, and EID; however, URLand EIDframes are not utilized in this application. In

depth information on Eddystone(TM) can be found here: https://developers.google.com/beacons/eddystone

4.1. UID FRAME

This frame type is very important in the XT15 as it comprises the primary functionality of the device. The UID is a

unique 16-byte ID with a 10-byte namespace and 6-byte instance ID. The namespace portion is used to group

sets of XT15s and the instance ID is used to identify individual devices.

UIDFrame

Frame Type Power at 1 M Namespace ID Instance ID RFU

1 byte 1 byte 10 bytes 6 bytes 2 bytes

4.2. TLM FRAME

The TLM frame type is used to display telemetry data about the operations of the clients in use. It can be used to

monitor beacons in the field. The frame is paired with an identifier frame because TLMhas no beacon ID. This

frame broadcasts at a 1/10 Hz frequency.

TLMFrame

Frame Type Version Battery

Voltage (mV)

Beacon

Temperature

ADV PDU Count

Since Boot

Time Since Boot (100ms

incraments

1 byte 1 byte 2 bytes 2 bytes 4 bytes 4 bytes

XT1520 Product Manual

Page 7 | 10

CONFIDENTIAL AND PROPRIETARY

5. BLUETOOTH PROTOCOL DIAGRAM

XT1520 Product Manual

Page 8 | 10

CONFIDENTIAL AND PROPRIETARY

6. REGULATORY STATEMENTS

6.1. FCC

This equipment with FCC-ID: GKM-XT1520 and IC-ID: 10281A-XT1520, Model: XT1520 is subject to the Federal

Communications Commission (FCC) and Industry Canada (IC) rules.

NOTICE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired

operation.

Changes or modifications made to this equipment not expressly approved by Xirgo Technologies, LLC may void

the FCC authorization to operate this equipment.

NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

lReorient or relocate the receiving antenna.

lIncrease the separation between the equipment and receiver.

lConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.

lConsult the dealer or an experienced radio/TV technician for help.

Radio frequency radiation exposure Information:

This equipment, XT1520, complies with FCC and ISED radiation exposure limits set forth for an uncontrolled

environment. This equipment must be installed and operated with minimum distance of 20cm between the

XT1520 and your body.

XT1520 Product Manual

Page 9 | 10

CONFIDENTIAL AND PROPRIETARY

6.2. IC

Antenna Statement

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and

maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio

interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically

radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une

antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le

but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type

d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas

l'intensité nécessaire à l'établissement d'une communication satisfaisante.

Licence exempt

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following

two conditions:

1. this device may not cause interference, and

2. this device must accept any interference, including interference that may cause undesired operation of the

device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes:

1. l'appareil ne doit pas produire de brouillage, et

2. l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement.

6.3. CE

The DOC (Declaration of Conformity) is either included in the packaging or can be found at the following link:

www.xirgotech.com

XT1520 Product Manual

Page 10 | 10

CONFIDENTIAL AND PROPRIETARY

WARNING: This product can expose you to chemicals including Nickel (Metallic), which is known

to the State of California to cause cancer and Bisphenol A (BPA), which is known to

the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

Inhaltsverzeichnis

Andere Xirgo Sicherheitssystem Handbücher

Xirgo

Xirgo XT1520-1 Series Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung