XPOtool 62690 Bedienungsanleitung
Operation Manual
Extension cord reel
62690, 62691, 62692
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
https://www.XPOtool.com Item 62690–62692 Page 2
The Tool Experts
01 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or
placing your order via the webshop.
E-mail: service@wiltec.info
Tel: +49 2403 55592-0
Fax: +49 2403 55592-15
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592-0
Fax: +49 2403 55592-15
https://www.XPOtool.com Item 62690–62692 Page 3
The Tool Experts
01 2022-1
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Attention! Abide by the information and instructions found within this operation manual to minimise the
risk of injury and property damage. – Only for domestic use. Not for commercial use.
Important! Read these instructions carefully and thoroughly. Keep these instructions to refer to them
later. If you give the product to anyone else, make sure you also to pass on this manual.
Keep small parts out of the reach of children. Pay special attention when unpacking it. Keep plastic bags
and other packaging away from children. Danger of suffocation!
Check all elements and parts for incompleteness and damages. Despite careful checks, even the best
product could be damaged during transport. In this case, do not assemble it. Damaged parts can en-
danger your health.
Never modify the product! Changes will void the warranty and the product may be unsafe or even dan-
gerous.
For cleaning use a sponge and warm soapy water. Do not use solvent-based cleaners of detergents,
e.g., bleach. They can damage the product.
Intended use
•The extension cord reel serves as a multi-extension to provide 230 V voltage where there are
no power outlets. Only use the cable drum in closed rooms. Contact with moisture must be
avoided.
•Only use the product for its intended purpose of use. Any modification applied by the customer
will have an impact on its safety and cause danger. No responsibility will be taken for damage
caused by improper handling or unappropriated use.
Safety instructions
•Before use, check that the power supply corresponds to that which is stated on the nameplate
of the device. Avoid unintentional starting.
•Do not allow water of other liquids to get into the appliance. Do not expose it to rain.
•Do not use the appliance of the plug, the mains cable or other components are damaged. If the
mains cable is damaged have the repair carried out by a qualified electrician to avoid a hazard.
Never try to repair the appliance yourself. Risk of electric shock!
•Avoid pulling the cord when removing the plug from the socket. Hold the plug instead.
•Never plug in or unplug the mains plug when your hands are wet.
•The device is not intended for use by persons with physical, sensory, or mental restrictions or a
lack of experience and/or knowledge of use unless they are supervised by a person responsible
for their safety or have received instructions from that person on how to use the device. Children
should be supervised to make sure that they do not play with the device.
Operation
If the cord drum is overheated, the built-in thermo-switch switches the whole cord drum off. Then dis-
connect the cable drum from the mains and disconnect the consumer load. Let the cable drum cool
down, then press the thermo-switch on the cord drum.
https://www.XPOtool.com Item 62690–62692 Page 4
The Tool Experts
01 2022-1
Maintenance and care
•Clean the wire and main housing with a damp cloth.
•Do not spray water or any other liquid into the reel.
•Only have the reel repaired by a specialist. Check all parts for signs of wear. If any problems
are detected, do not use the product. Always replace all damaged parts with original spare parts.
•If the product is not properly cared for and maintained, it can become unsafe and be damaged.
This can lead to dangerous situations. Regular maintenance on the product helps to keep it safe
and to increase its lifespan.
•Store the reel in a clean and dry place, out of the reach of children.
Parts list
Extension cord reel
Expansion bolt
Installation
1. Choose a location free of electrical wiring or other obstructions, making sure that the surface
will be able to hold the hose reel.
2. Position the mounting bracket against the surface where you will fix it. Mark the holes for screw-
ing the expansion bolts on the surface. It is advised to fix the reel at least 80 cm away from the
floor.
3. Drill holes on the spots marked and ensure that the holes fit the expansion bolts.
4. Fix the mounting bracket to the wall with the expansion bolts provided.
5. Check that the hose extends and retracts smoothly.
https://www.XPOtool.com Item 62690–62692 Page 5
The Tool Experts
01 2022-1
Technical data
62690
62691
62692
Cable length (m)
10
15
20
Input cable length (m)
1.5
Cable type
H05VV-F 3G1.5mm²
Power supply
230 V / 50 Hz
Max. rated power (W)
Unreeled
2300
Reeled up
1000
Protection code
IP20
Operating temperature (℃)
-5–+55
https://www.XPOtool.com Item 62690–62692 Page 6
The Tool Experts
01 2022-1
Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were imple-
mented in the law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.
The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE-
registration number DE45283704.
Disposal of used electrical and electronic appliances
(intended for use in the countries of the European Un-
ion and other European countries with a separate col-
lection system for these appliances).
The logo on the article or on its packaging points out
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion point for electronic and electrical waste equipment.
By contributing to the correct disposal of this article you
protect the environment and the health of your fellow
men. Environment and health are threatened by inap-
propriate disposal.
Material recycling helps reduce the consumption of raw materials.
Additional information on recycling this article can be provided by your local community, municipal waste
disposal facilities, or the store where you purchased the article.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere XPOtool Kabel und Steckverbinder Handbücher
