XtendLan DPC-D248-R Bedienungsanleitung

DPC-D248-R DPC-D248-FR

RF CARD RF CARD

English

User Manual

2-Wire Video Outdoor Station

Contents

1.Parts and Functions............................................................................................. 1

2.Terminal Descriptions .......................................................................................... 1

3.Door Station Mounting......................................................................................... 2

4. System Wiring and Electric Lock Connection..................................................... 4

5. ID Card Registration........................................................................................... 8

6.Unlock Operations............................................................................................... 10

7.ID Setting of Door Station.................................................................................... 10

8. Precaustions....................................................................................................... 11

9. Specications ..................................................................................................... 11

10. Cables Requirements....................................................................................... 12

Side View Mounting box

ID card window

Rainy Cover

Camera Lens

Speaker

Nameplate

Call Button

Microphone

93 mm

182 mm

Night Light

RF CARD ID card window RF CARD

30 mm

220 mm

120 mm

RF CARD

Camera Lens

Speaker

Nameplate

Call Button

Microphone

Night Light

Screws for panel

mounting

RF CARD

1.Parts and Functions

2.Terminal Descriptions

1 2 3

Lock Control Jumper

BUS

S+ S-

Main Connect Port

-1-

3.Door Station Mounting

1 2

Drill holes in the wall to match the size of

screws and attach the rainy cover to the wall.

Attach the panel to the rainy cover Use the screwdriver and the screw

to fix the panel

Connect the cable correctly

DT601/ID Mounting

-2-

•Lock Control Jumper: To select the lock type.

•Main Connect Port: To connect the bus line and the electronic locks.

•BUS: Connect to the bus line, no polarity.

•PL: External lock power input, connect to the power positive(power +).

•S+: Lock power(+) output.

•S-: Lock power(-) output, connect to the power(-) input of locks(only when using the door

station to power the locks, if using the external power supply for the locks, the S- will not be

connected).

Mounting

1 2

Drill a hole in the wall to match the size of the

mounting box and attach to the wall.

Attach the panel to the mounting box and

use screws supplied to fix the panel

Connect the cable correctly

Placing Name Label

AcDbMLeader (ACDB_MLEADER_CLASS)

-3-

Use a screwdriver to unscrew the screw, and cock the host , then Placing Name Label.

4. System Wiring and Electric Lock Connection

Basic Connection

AC~

monitor

DPS PS4

L1 L2 PL S+ S-

-4-

Electric Lock Connection

Door Lock Controlled with Internal Power

Note:

1. Electronic lock of Power-on-to-unlock type

should be used.

2. The door lock is limited to 12V, and holding

current must be less than 250mA.

3. The door lock control is not timed from Exit

Button(EB).

4. The Unlock Mode Parameter of Monitor

must be set to 0 (by default).

LOCK

BUS PL S+S-

Jumper position in 2-3

1 2 3

Unlock parameter setting(set on monitor)

LOCK

Take off the Jumper

POWER

SUPPLY

BUS PL S+S-

1.Touch item on main

menu page.

2.Touch the screen anywhere

and hold for 2s.

3.Touch Installer setup item

4.A digital keypad and setting

instructions will be showed.

Manual

Monitor

Memory

Playback

Album User Setup

09/30/2010 Thu.16:41

Intercom Multimedia

About

H/W : --- a1.3

S/W: V17.11.418.00

Local addr: ---

Unlock timing: ---

Video standard: -

UI-CODE: ---

MCM-VER.: ---

Updated: ---

Home

Installer

setup

Caliber

TouchScreen

Code Number:[----]

[0010]#:Remove all remote control

[0011]#:Add remote control

[8000]#:Set as master unit 0

[8001]#:Set as slaver unit 1

[8002]#:Set as slaver unit 2

[8003]#:Set as slaver unit 3

[8004]#:Set as guard unit

[8005]#:Set as not guard unit

[8006]#:Panel on as slaver unit called

[8007]#:Panel off as slaver unit called

[8008]#:Date format:MM/DD/YYYY

[8009]#:Date format:DD/MM/YYYY

[8010]#:Set lock mode to 0

[8011]#:Set lock mode to 1

[8021]~[8029]

#Set the lock time of 1~9s

Multi language settings:

---

Cancel

Installation settings:

-5-

Door Lock Controlled with Dry Contact

Note:

1. The external power supply must be used

according to the lock.

2. The inside relay contact is restricted to AC or

DC 24V/1A.

3. The jumper must be taken off before connecting.

4. Setup the Unlock Mode of Monitor for

different lock types.

•Power-on-to-unlock type:Unlock Mode=0 (by

default)

•Power-off-to-unlock type:Unlock Mode=1

Note:

1.must connect DT601(F)/ID correctly before setting.

2.the parameter will be saved in DT601(F)/ID automatically,so you need only set on one monitor.

3.the above diagram is t for icon menu series monitors only, to text menu series monitors,please refer to

the corresponding user manual.

-6-

Multi Door Stations Connection

85~260VAC

DT-DPS PS5

monitors

DIP=on,off,off

DBC4S

A B C D

OFF

Impedance

switch

1# Camera2# Camera3# Camera4# Camera

L1 L2 PL S+ S-L1 L2 PL S+ S-

L1 L2 PL S+ S-

(Device Address:3) (Device Address:2) (Device Address:1) (Device Address:0)

Basic IN-OUT Wiring Mode

Multi Monitors Connection

Code=0, DIP-6=off

1 2 3 4 5 6

Code=15, DIP-6=on

1 2 3 4 5 6

Code=14, DIP-6=off

1 2 3 4 5 6

monitor

Code=1, DIP-6=off

1 2 3 4 5 6

monitor

monitormonitor

85~260AC

DPS PS5

RF CARD

(Device Address:0)

With DBC4S Wiring Mode

85~260AC

DPS PS5

1 2 3 4 5 6

Code=15, DIP-6=on

Code=13, DIP-6=on

1 2 3 4 5 6

Code=14, DIP-6=on

Code=12, DIP-6=on

1 2 3 4 5 6

Code=3, DIP-6=on

Code=1, DIP-6=on

1 2 3 4 5 6

Code=2, DIP-6=on

Code=0, DIP-6=on

OFF ON

monitor

BC4S

A B C D

BC4S

A B C D

Impedance

switch

Impedance

switch

DIP=on,off,off

RF CARD

(Device Address:0)

NOTE:Here we take DT27(the monitor) for example.

-7-

5. ID Card Registration

Introduction:

•Up to 320 user cards can be registered by the door station.

•Easy management with LED status and sound hints.

•There are two master cards, one MASTER CARD ADD card and one MASTER

CARD DELETE card, When registered new master cards, the old master cards

are invalid automatically.

•Card reading distance is from 3 to 5 cm.

•The master cards are necessary when you add or delete user cards. Please

keep it well for future use.

-8-

Add User Cards:

The color of

background indicator

beep+,beep beep+ beep,beep+

Show the MASTER CARD

ADD card to ID card window

in standby mode.

Show user cards to be

added, one by one.

Show the MASTER CARD

ADD card to exit.

(white)

The color of

background indicator

(green blink

one time)

The color of

background indicator

(blue)

Delete User Cards:

Notice:it will return to standby mode if no operation within 10s .Or press Call Button to exit the status of

setting and start to call the monitor.

The color of

background indicator

beep+,beep beep+ beep,beep+

Show the MASTER CARD

DELETE card to ID card

window in standby mode.

Show user cards to be

deleted in sequence

Show the MASTER CARD

DELETE card to exit.

(yellow)

The color of

background indicator

(green blink

one time)

The color of

background indicator

(blue)

Notice:it will return to standby mode if no operation within 20s.Or press Call Button to exit the status of

setting and start to call the monitor.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere XtendLan Gegensprechanlage Handbücher

XtendLan

XtendLan DPC-D218ID Bedienungsanleitung

XtendLan

XtendLan DPC-D246A Bedienungsanleitung

XtendLan

XtendLan DPC-D244-K Bedienungsanleitung

XtendLan

XtendLan DPC-D250 series Bedienungsanleitung

XtendLan

XtendLan DPC-D241-1 Bedienungsanleitung

XtendLan

XtendLan DPM-IP700 Bedienungsanleitung

XtendLan

XtendLan PM-IP-701TMD Bedienungsanleitung

XtendLan

XtendLan DT607 Series Bedienungsanleitung

XtendLan

XtendLan DPP-D202 Bedienungsanleitung

XtendLan

XtendLan CAT-5 wired Kurzanleitung

XtendLan

XtendLan XL-DM327G Bedienungsanleitung

XtendLan

XtendLan DPC-IP101ID Bedienungsanleitung

XtendLan

XtendLan DPM-473AD Bedienungsanleitung

XtendLan

XtendLan DPM-535 Bedienungsanleitung

XtendLan

XtendLan DPM-D271TMD Bedienungsanleitung

XtendLan

XtendLan DPC-D268 Bedienungsanleitung

XtendLan

XtendLan DPM-451 Bedienungsanleitung

XtendLan

XtendLan DPK-242 Bedienungsanleitung

XtendLan

XtendLan DPM-D2101TMD Bedienungsanleitung

XtendLan

XtendLan DPC-W110-ID Bedienungsanleitung

XtendLan

XtendLan DPC-434 Series Bedienungsanleitung

XtendLan

XtendLan DPC-511 Bedienungsanleitung

XtendLan

XtendLan DPM-473M Bedienungsanleitung

XtendLan

XtendLan GSM DPC-G100 Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung

Bticino

Bticino Classe 300 Bedienungsanleitung

LG L5142 Bedienungsanleitung