XtendLan IVS-184CPW Bedienungsanleitung

IVS-184CPW

IP video server

User’s Guide

Introduction

Thank you for purchasing our digital video server. It is an IP-based digital

surveillance device. It has functions like video capture, real-time compression,

network transmission and so on. It can transmit high-quality audio and video

data streams in low-bandwidth network to achieve real-time video transmission

in LAN/WAN, so that remote clients can enjoy the functions like image preview,

recording, playback, snapping and alarming while staying at home.

The product applies to enterprises, banks, security checkpoints, highways

and other places that need network video transmission and monitoring

capability. This product is easy to install and operate.

Notes:

DVS in this manual refers to all Digital Video servers, including HDD storage

and SD card storage DVS.

Statement:

Contents in this manual may be different from the edition that you are

using. Should any unsolved problem occur given that the product is used

according to this manual, please contact our technical support department or

your product suppliers.

The content of this manual may be updated at irregular intervals without

prior notice.

III

Contents

Chapter1 Product Overview.............................................4

1.1 Product Application ....................................................................4

1.2 Features......................................................................................4

1.3 Technical Parameters .................................................................5

1.4 Application Environment ............................................................6

Chapter2 Hardware description.......................................8

2.1 Front Panel ................................................................................. 8

2.2 Back Panel ..................................................................................9

2.3 Install HDD................................................................................10

2.4 Alarm Connection Instruction...................................................10

2.4.1 Alarm input connection mode .......................................................10

2.4.2 Alarm output connection mode.....................................................11

2.5 Network Connection.................................................................12

2.5.1 Connect DVS to network with IP share switch ...............................12

2.5.2 Connect DVS to PC with crossover cable........................................12

Chapter3 Search Device.................................................14

3.1 Search Device and Modify Network Parameters ......................14

3.1.1 Run SearchNVS software ...............................................................14

3.1.2 Set IP address ................................................................................14

3.2 Check Connection.....................................................................15

Chapter4 Introduction of IE............................................17

4.1 Install ActiveX and Login Device ...............................................17

4.2 Live Preview.............................................................................. 18

4.3 Record Playback ....................................................................... 19

4.4 Set System Parameters............................................................. 21

4.4.1 System Settings .............................................................................21

4.4.2 Video Settings ...............................................................................22

4.4.3 Audio Settings ...............................................................................24

4.4.4 Alarm Settings...............................................................................24

4.4.5 Network Settings...........................................................................29

4.5 User Management....................................................................34

4.6 Storage Settings........................................................................ 34

4.6.1 Device Management .....................................................................34

4.6.2 Record Schedule ............................................................................36

4.6.3 Snap Schedule ...............................................................................36

4.7 Front-end Settings ....................................................................37

4.8 Local Settings............................................................................37

Appendix A: Network Interface for DVS........................39

Appendix B: Default Network Parameters....................40

Appendix C: Application for DDNS ...............................41

IP Camera DDNS Introduction ........................................................ 41

DDNS function........................................................................................41

The DDNS process of IP camera..............................................................41

Application for DDNS......................................................................41

Appendix D: Visit DVS under Different Network

Environments ..................................................................44

Appendix E: FAQ.............................................................48

Product OverviewChapter1

1.1 Product Application

DVS can be used for surveillance in public places, such as in supermarkets,

kindergartens, factories, warehouses and so on. Also because of its strong

image-processing performance, it can be used in some advanced environment,

such as banks, net bars or transportation systems.

1.2 Features

Built-in Web Sever, users can visit the DVS to realize remote surveillance

and control via IE.

Adopt optimized H.264 video compression algorithm to satisfy the

transmission of High Definition video at low network bandwidth.

Support local storage of SD card and built-in SATA hard disk storage (see

specific model), maximum capacity is 32GB.

Adopt optimized G.726 audio compression algorithm to make the sound

clearer.

Support PAL/NTSC composite video.

D1 High Definition real-time digital video server, fully compatible with

Half-D1, CIF and QCIF

Video bitrate can be adjusted continuously between 32Kbpsand 16Mbps,

frame rate can be adjusted from1 to 30 (NTSC).

Support LAN, WAN and IEEE802.11a/b/g/n wireless network

transmission.

RS-485 communicates port. Support transparent serial port transmission,

multiple PTZ, high-speed dome protocol, etc.

Bi-directional audio talkback and broadcast

4 channel on/off alarm input and output

Support alarm recording, manual recording and scheduled recording;

Support video motion detection, able to trigger device alarm recording

and snapping or linkage alarm for E-mail sending or FTP uploading. Motion

detection of four areas is supported.

Provide motion detection, video loss, sensor alarm and network failure

linkage alarm functions, able to trigger snapping, recording, E-mail sending and

FTP uploading.

Support multiple network protocols: HTTP, TCP/IP, UDP, SMTP, DDNS,

DNS, SNTP, BOOTP, DHCP, FTP, SNMP, RTP and UPNP.

Support multi-user visit and multi-level password authorization

management.

Support remote secure upgrade function of the device.

Auto-recovery when incident occurs and auto-connect if the network

interrupts.

1.3 Technical Parameters

Video

Video input

1/2/4channel composite video, PAL or NTSC;

BNC (1.0Vp-p,75Ω)

Video

Compression

H.264

Video Definition

PAL: 176*144（QCIF）, 352*288（CIF）, 704x288(2CIF),

704*576(D1)

NTSC: 176*128（QCIF）, 352*240（CIF）, 704x288(2CIF),

704*480(D1)

Video

Parameters

Brightness, Hue, Contrast, Saturation

Streaming

Format

Video Streaming or Audio&Video composite Streaming

Video Frame

Rate

PAL: 1-25fps

NTSC: 1-30fps

Video

Compression BR

32Kbit/S～16Mbit/S

Audio

Audio Input

1/2/4 channel, RCA port, linear input

Audio

Compression

G.726

Audio Output

Single-channel, RCA Interface, linear Output

Talkback Input

Single-channel, MIC Interface

Network

10M/100M self-adapting Ethernet port (RJ45)

Interface

Wi-Fi interface

Support 802.11 b/g protocol and WPA, WPA2, WEP

encryption protocols (see specific model)

Storage

SD card

interface

Built-in SD card, supports SD card storage and snapshot,

SD 2.0 standard, maximum 32G capacity

SATA interface

Supports SATA hard disk interface, 1 built-in SATA hard

disk (Depending on sepecific models)

PTZ

PTZ interface

RS-485

PTZ Protocol

Support several PTZ protocols, able to control high speed

dome

Alarm

Alarm Input

4 channel on/off input, supporting NO (normally open) or

NC (normally close) mode.

Alarm Output

4 channel on/off output,120VAC 1A/24VDC 1A

Management

User

Authentication

Account number, password encryption authentication

Remote

Monitoring

PTZ remote control, allows multiple users to visit one

channel at the same time

Remote

Configuration

Remote configuration of system through network control

Remote upgrade

Remote upgrade of system through network control

Remote Reset

Remote reset of system through network control

Other

Input Power

Supply

DC 12V/1A or DC 12V/3A(power adapter AC 100～240V

，50～60Hz)

Maximum Power

Less than 18W

Operating

temperature

-10 ~ +55 ℃

Operating

Humidity

10 ~ 85%

1.4 Application Environment

Minimum configuration of hardware environment

CPU: Pentium 2.0 GHz

System Memory: 256MB

Graphics Card: TNT2

Sound Card: necessary for audio surveillance and talkback

Hard Disk: minimum 40G capacity required for image recording.

Recommended configuration of hardware environment

CPU: Pentium 2.6GMhz

System Memory: 512MB

Graphics Card: Nvidia Geforce FX5200 or ATI RADEON 7000(9000) serials

128M Display Card Memory

Operation system

32-bit Simplified Chinese & English editions of Windows2000,

Windows2003,WindowsXP, Windows Vista, 64-bit Simplified Chinese & English

editions of Windows2003, WindowsXP, Windows Vista

Software Environment

IE 6.0 edition or above

DirectX8.0 edition or above

TCP/IP

Other requirements:

The PC installed with this software requires a graphics card that supports

the color change and zoom of image, nowthe graphics card that has been tested

are: Nvidia Tnt/Tnt2、Geforce Mx200/400/420/440 Fx5200/5600 series, ATI

Radeon 7000/7200/7500/8500/9000/9200/9500/9600 series, MatroxG450/550

and INTEL845G/865G series. Please note that the graphics card driver must be

hardware scaling supportive.

Hardware descriptionChapter2

2.1 Front Panel

DVS Front Panel (SD Card Storage only)

SD Card: SD card interface for SD card storage, currently maximum

capacity is 32G.

DVS Front Panel (With HDD Storage)

USB: USB interface to connect storage device like card reader, currently it

does not support USB portable hard drive.

Pilot lamp:

panel

labels

Pilot lamp status

Description

PWR

Red light

Always on

DVS normal power on

Always off

DVS normal power off

LINK

Green light

Always on

Network OK

Always off

No network, network cable

disconnected or network blocked

ACT

Orange light

Always flash

Transmitting network data

Always off

Network disconnected

ALARM

Red light

Always on

System alarm

Always off

No Alarm

HDD

Blue Light

Always Flash

HDD reads and writes data

Always off

HDD not work

2.2 Back Panel

DVS Back Panel (one channel)

DVS Back Panel (two channels)

DVS Back Panel (four channels)

Interface Description:

DC 12V: Power holes, used to connect power. Power specifications are

DC12V/1A or DC12V/3A (depends on specific models), using unmatched power

may lead to DVS damage or HDD not working.

Note:

Use unmatched power may lead to DVS damage or HDD not working.

LAN: Ethernet Port. It is used to connect hub, switch or PC with graphics

card installed in LAN.

Vin1—Vin4: 1~4 channel video input interface to access video source.

Ain1—Ain4: 1~4 channel audio input interface, linear input, 1KΩ

impedance.

ANT: Wireless antenna for wireless network access.

MIC: Microphone input, used for talkback.

Aout: Audio output interface.

RESET: System parameters reset button, used to restore factory default

settings.

Lightning protection nut.

Note:

Make sure it is connected to the lightning protection network of the

equipment room correctly.

Alarm Output: Four-channel Alarm Output

1 –1

2 - 2

3－3

4-4

Channel

1 relay output

Channel

2 relay output

Channel

3 relay output

Channel

4 relay output

Alarm Input: Four-channel Alarm Input

Inhaltsverzeichnis

Andere XtendLan Server Handbücher

XtendLan

XtendLan DVR-470B Bedienungsanleitung

XtendLan

XtendLan TC Service-Handbuch

XtendLan

XtendLan DVR-471 Bedienungsanleitung

XtendLan

XtendLan IVS-170BD Bedienungsanleitung

XtendLan

XtendLan TC-60xL Bedienungsanleitung

XtendLan

XtendLan IVS-170BA Bedienungsanleitung

XtendLan

XtendLan IVS400A Bedienungsanleitung

XtendLan

XtendLan TC-401L Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung