Xtreme Power Conversion 700VA Leitfaden

T90 Online UPS

700VA, 1000VA, 1500VA, 2000VA, 3000VA Models

User & Installaon Manual

Xtreme Power Conversion Corporaon

T90 User’s Manual

Page 2

Uninterrupble Power Supply

Table of Contents

EMC Statements - FCC Part 15......................................................................5

ICES-003...........................................................................................................................................5

Declaraon of Conformity Request.................................................................................................5

Special Symbols...............................................................................................................................7

Introducon.................................................................................................8

Product Descripon......................................................................................8

Double Conversion Online Technology............................................................................................8

Eciency Opmizer Funcon..........................................................................................................9

Free Run Mode................................................................................................................................9

Diagnosc Tests...............................................................................................................................9

System Conguraon.......................................................................................................................9

System Conguraon..................................................................................10

Storage.......................................................................................................11

Installaon.................................................................................................11

Environment..................................................................................................................................11

Rear Panel Views............................................................................................................................15

Rear Panel Views...........................................................................................................................16

Connecon To Mains And Loads...................................................................................................20

Default Sengs At The Factory......................................................................................................21

Computer And Alarm Connecons.............................................................22

Connecng the UPS to a Computer...............................................................................................22

RS-232 Standard Interface Port.....................................................................................................22

USB Port (opon)...........................................................................................................................23

EPO Port (Emergency Power O).................................................................................................. 23

Network Transient Protector..........................................................................................................23

Load Segments...............................................................................................................................23

User’s Guide To Operaons.........................................................................24

Starng And Shung Down The UPS............................................................................................24

Xtreme Power Conversion Corporaon

T90 User’s Manual

Page 3

Uninterrupble Power Supply

Buon Operaon...........................................................................................................................24

Control Panel Funcons.................................................................................................................25

Troubleshoong.............................................................................................................................28

Maintenance..............................................................................................29

Replacing Baeries........................................................................................................................29

Technical Specicaons..............................................................................31

Terminal Block............................................................................................32

Obtaining Service.......................................................................................33

Xtreme Power Conversion Limited Warranty...............................................34

Xtreme Power Conversion Load Protecon Policy.......................................35

Xtreme Power Conversion Corporaon

T90 User’s Manual

Page 4

Uninterrupble Power Supply

Thank you for selecng this Uninterrupble Power Supply (UPS). It provides you with protecon for connected

equipment. Please read this manual before installing the NXRT-Series UPS models NXRT-1000, NXRT-1500, NXRT-

2000 and NXRT-3000 as it provides important informaon that should be followed during installaon and main-

tenance of the UPS and baeries, allowing you to correctly set up your system for the maximum safety and per-

formance. Included is informaon on customer support and service, if it is required. If you experience a problem

with the UPS, please refer to the Troubleshoong secon in this manual to correct the problem. If the problem is

not corrected, please collect informaon so that the Technical Support personnel can more eecvely assist you.

Xtreme Power Conversion Corporaon

T90 User’s Manual

Page 5

Uninterrupble Power Supply

EMC Statements - FCC Part 15

Noce: Pursuant to secon 15 of the FCC rules, this product has been tested and thereby complies to the condi-

ons of a Class B (700-1500VA) and Class A (2000-3000VA) digital device, which have been established for oering

sucient protecon against dangerous interference for installaon in a residenal area. Installaon and use of the

equipment should comply with the instrucons provided in order to avoid such interference due to the amount

of radio frequency energy that is radiated and generated by the equipment. In spite of this, we cannot assure that

a certain amount of interference may not occur in some installaons. If, by turning on and o, it can be deduced

that your radio or television recepon is found to be inuenced by harmful interference from the equipment, it is

recommended to use one of the following prevenve measures:

• Place the receiving antenna in a separate locaon or orientaon.

• Ensure a greater distance is achieved between the receiver and the equipment.

• Ensure that your equipment is connected to an outlet on a separate circuit than the receiver.

• Contact a technician experienced with radio and TV or a dealer for further assistance.

ICES-003

This Class B Interference Causing Equipment meets all requirements of the Canadian Interference Causing Equip-

ment Regulaons ICES-003. Cet appareil numerique de la classe B respecte toutes les exigencies du Reglement sur

le materiel brouilleur du Canada.

Declaraon of Conformity Request

Units labeled with a CE mark comply with the following standards and direcves:

• Harmonic Standards: EN 50091-1-1, EN 62040-1-1 1st / IEC 62040-1-1 1st and EN 50091-2 / EN62040-2

1st / IEC 62040-2 1st.

• EU Direcves:73/23/EEC, Council Direcve on equipment designed for use within certain voltage limits:

2006/95/EC, Amending Direcve 93/68/EEC and 73/23/EEC

89/336/EEC, Council Direcve relang to electromagnec compability

2004/108/EC, Amending Direcve 92/31/EEC and 89/336/EEC relang to EMC

The EC Declaraon of Conformity is available upon request for products with a CE mark.

IMPORTANT SAFETY INSTRUCTIONS: (SAVE THESE INSTRUCTIONS)

• This Manual Contains Important Instrucons that should be Followed during Installaon and Maintenance

of the UPS and Baeries.

• The equipment can be operated by any individuals with no previous experience.

• WARNING: Intend for installaon in a controlled environment. Maximum ambient temperature 40°C.

• CAUTION: Risk of electric shock. Refer to top or rear or boom of UPS for cauonary markings.

• CAUTION: Risk of electric shock. Heat sinks are live. Disconnect unit before servicing.

• CAUTION (UPS Having Internal Baeries): Risk of electric shock - Hazardous live parts inside this unit are

energized from the baery supply even when the input AC power is disconnected.

Xtreme Power Conversion Corporaon

T90 User’s Manual

Page 6

Uninterrupble Power Supply

• CAUTION (No User serviceable Parts): Risk of electric shock, do not remove cover. No user serviceable

parts inside. Refer servicing to qualied service personnel.

• CAUTION (Non-isolated Baery supply): Risk of electric shock, baery circuit is not isolated from AC in-

put, hazardous voltage may exist between baery terminals and ground. Test before touching.

• WARNING (Fuses): To reduce the risk of re, replace only with the same type and rang of fuse.

• CAUTION: Do not disconnect baery connector under load.

• ATTENTION: Hazardous through electrical shock. Also with disconnecon of this unit from the mains,

hazardous voltage sll may be accessible through supply from the baeries. The baery supply should

therefore be disconnected in the plus and the minus pole when maintenance or service work inside the

baery cabinet or UPS is considered.

• CAUTION (For any pluggable only): With the installaon of this equipment it should be prevented, that

the sum of the leakage current of the UPS and connected consumer does not exceed 3.5 mA.

• CAUTION (For permanent connecon only): HIGH LEAKAGE CURRENT, Earth connecon essenal before

connecon supply

• WARNING: Intend for installaon in a controlled environment.

• CAUTION: Do not dispose of baeries in a re, the baery may explode.

• CAUTION: Do not open or mulate the baery, released electrolyte is harmful to the skin and eyes.

• CAUTION: A baery can present a risk of electric shock and high short circuit current. The following pre-

cauon should be observed when working on baeries:

A. Remove watches, rings or other metal objects.

B. Use only tools with insulated handles.

C. Wear rubber gloves and boots.

D. Do not lay tools or metal parts on top of baeries.

E. Disconnect charging source prior to connecng or disconnecng baery terminals.

• To reduce the risk of electric shock, disconnect the UPS from the mains supply before installing a computer

interface signal cable. Reconnect the powers cord only aer signaling interconnecons have been made.

• Servicing of baeries should be performed or supervised by personnel knowledge of baeries and the

required precauons. Keep unauthorized personnel away from baeries.

• CAUTION: When replacing baeries, replace with the same type and number of baeries: One Sealed lead

acid baery, rated 12 V, 8.5 Ah max.

• CAUTION: To reduce the risk of re, use only No. 26 AWG or larger telecommunicaon line cord.

• CAUTION (FOR 1500VA HV Only): To reduce the risk of re. Connect only to a circuit provided with 20

amperes maximum branch circuit overcurrent protecon in accordance with the Naonal Electric Code,

ANSI/NFPA 70”.

Xtreme Power Conversion Corporaon

T90 User’s Manual

Page 7

Uninterrupble Power Supply

• CAUTION (FOR 3000VA Only): To reduce the risk of re. Connect only to a circuit provided with 30 amperes

maximum branch circuit overcurrent protecon in accordance with the Naonal Electric Code, ANSI/NFPA

70”.

• CAUTION (FOR 700-2000VA Only): To reduce the risk of re. Connect only to a circuit provided with 20

amperes maximum branch circuit overcurrent protecon in accordance with the Naonal Electric Code,

ANSI/NFPA 70”.

The instrucons contained within this safety manual are deemed important and should be closely followed at all

mes during installaon and follow-up maintenance of the UPS and baeries.

CAUTION

The unit has a dangerous amount of voltage. If the UPS indicator is on, the unit’s outlets may have a

dangerous amount of voltage even when not plugged into the wall outlet because the baery may

connue to supply power.

Care should be taken to undertake installaon indoors, free from electrically-conducve parcles

which are under temperature and humidity control, in order to reduce the risk of electric shock.

It is best to disconnect the device using the power supply cord. Ensure that the equipment is placed

in a posion near the outlet where easily accessible.

Except for replacing the baeries, all servicing on this equipment must be carried out by qualied

service personnel.

Before conducng any maintenance, repair, or shipment, rst ensure that everything is turned o

completely and disconnected.

For addional safety instrucons, please use the Safety Manual as a reference.

Special Symbols

The following symbols used on the UPS warn you of precauons:

RISK OF ELECTRIC SHOCK - Please observe the warning that a risk of electric shock is present

CAUTION: REFER TO OPERATOR’S MANUAL - Refer to the operator’s manual for addional informaon,

such as important operang and maintenance instrucons.

SAFE GROUNDING TERMINAL - Indicates primary safe ground

LOAD ON/OFF – Pressing the buon turns on/o the output receptacles and the indicator light.

RJ45 RECEPTACLE – The receptacle provides network interface connecons and telephone or telecommu-

nicaons equipment should not be plugged into it.

Please do not discard of the UPS or the UPS baeries as the UPS may have valve-regulated lead-acid bat-

teries. Please recycle baeries appropriately.

Xtreme Power Conversion Corporaon

T90 User’s Manual

Page 8

Uninterrupble Power Supply

Introducon

The informaon provided in this manual covers single phase T90 700–3000VA, uninterrupble power systems,

their basic funcons, operang procedures, and emergency situaons, also including informaon on how to ship,

store, handle and install the equipment. Only detailed requirements of the UPS units are described herein, and

installaon must be carried out in accordance with this manual. Electrical installaons must also carefully follow

local legislaon and regulaons. Only qualied personnel should conduct these installaons as failure to acknowl-

edge electrical hazards could prove to be fatal.

Product Descripon

Several dierent kinds of sensive electrical equipment stay protected by a UPS (Uninterrupble Power System)

including computers, workstaons, process control systems, telecommunicaons systems, sales terminals, other

crical instrumentaon, etc. The purpose of the UPS is to protect these systems from poor quality ulity power,

complete loss of power, or other associated problems.

Electrical interference abounds in many forms causing problems in AC power, from lightning, power company ac-

cidents and radio transmissions to motors, air condioners, and vending machines, among others. So protecon of

sensive electrical equipment is vital to protect against power outages, low or high voltage, slow voltage uctua-

ons, frequency variaons, dierenal and common-mode noises, transients, etc.

In order to prevent power line problems reaching crical systems causing damage to soware, hardware and

causing equipment to malfuncon, the UPS helps by maintaining constant voltage, isolang crical load output if

needed, and cleaning the ulity AC power.

Double Conversion Online Technology

A double conversion on-line technology UPS provides completely isolated, clean, uninterrupted single-phase pow-

er to your crical systems, while maintaining the baeries for their maximum potenal. In the event that the

power failure lasts longer than the UPS backup me, the UPS will shut down avoiding baery damage. When the

input AC voltage returns, the UPS will automacally return online to recharge the baeries.

As shown in block diagram:

• An input lter reduces transients on the mains

• For maintaining full baery charge, AC-power is reced and regulated in the recer feeding power to

the inverter and baery converter.

• DC power is converted to AC in the inverter passing it on to the load.

• Power is maintained from the baery during a power failure.

• The converter increases voltage appropriately for the inverter

Xtreme Power Conversion Corporaon

T90 User’s Manual

Page 9

Uninterrupble Power Supply

Eciency Opmizer Funcon

The Eciency Opmizer funcon is a new feature for the UPS adding cost eecveness, minimizing power loss

and reducing power consumpon. Alternang between bypass and on-line modes is achieved automacally and

in accordance with the condions of the ulity power. On-line mode may be used during mes of intermient

power supply, and bypass mode when power ows smoothly in order to obtain greatest eciency. Irregularies

can be detected in less than a second, and on-line mode reacvated immediately. Switching back to online mode

occurs when input voltage is outside ±10% or nominal (±15% selectable), when input frequency is outside of ±3Hz

or when no input line is available.

Although high eciency is standard, the default operaon is in on-line mode. Bypass can be acvated in the LCD

panel, though on-line can be run permanently if preferred.

Free Run Mode

The UPS operates in free run mode when input frequency is outside of the selected input frequency range. Free

run mode is when output frequency does not match input frequency. When starng the UPS, the frequency regu-

laon detected is 50 or 60 Hz ±0.25Hz. Please refer to chapter 7.2 if you want bypass available while running in

free run mode.

Diagnosc Tests

When you start the UPS, a diagnosc test is automacally executed that checks electronics, baery, and reports

any problems on the LCD display.

An advanced baery management system always monitors the condions of the baeries sends any fore warn-

ings if replacement is needed. Otherwise every 30 days of normal mode operaon, a baery discharge test is

performed and any problems reported on the LCD display.

Except during the rst 24 hours aer startup while the UPS is in charging mode (please see chapter 7.2), diagnosc

tests can be performed manually from the front panel at any me.

System Conguraon

The UPS device and the internal backup baery make up the system. Depending on the site and load requirements

of the installaon, certain addional opons are available as a tailored soluon.

Planning a UPS system, the following should be taken into consideraon:

• The total demand of the protected system shall dictate the output power rang (VA). Allow a margin for

future expansion or calculaon inaccuracies from measuring power requirements.

• Backup me needed will indicate the baery size needed. If load is less than the UPS nominal power rang

then actual backup me is longer.

• The following opons are available:

• External Baery Cabinets

• Transformer cabinets

• Maintenance bypass switches

• Connecvity opons (relay card, SNMP/WEB card)

Xtreme Power Conversion Corporaon

T90 User’s Manual

Page 10

Uninterrupble Power Supply

The following UPS models are available:

Model Backup me with internal baeries Recharge me to 90% capacity

T90-700 5 min 3 hours

T90-1000 6 min 3 hours

T90-1500 5 min 3 hours

T90-2000 6 min 3 hours

T90-3000 5 min 3 hours

Addional External Baery Cabinets are available if more back-up me is needed.

System Conguraon

Informaon presented here is vital to all personnel and please also read the UPS safety manual.

Storage and Transportaon

Please handle with extreme cauon since a high amount of energy is contained with the baeries. Always keep the

unit in posion as marked on the packaging and never drop the unit.

Installaon

If ammable substances such as gases or fumes are present or if the room is airght, a safety hazard situaon ex-

ists, in which no electrical equipment should be operated.

The instrucons in this manual explain how to install the UPS safely. Not acknowledging such electrical hazards

may be fatal, so keep this manual for all future reference.

WARNING!

It is strongly advisable not to open the UPS cabinet as the components have very high voltage and

touching them may be fatal. Only a technician from the manufacturer or an authorized agent may

service the unit.

This UPS unit’s output receptacles carry live voltage even when not connected to a power supply as

it has its own energy source.

User’s Operaons

The only operaons that users are permied to do are:

• Turning the UPS unit on and o

• Operang the users interface

• Connecng data interface cables

• Changing the baeries

All such operaons are to be performed exactly as instructed in this manual. The greatest care possible must be

taken for any of these operaons and any change thereof may prove very hazardous to the operator.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xtreme Power Conversion UPS Handbücher

Xtreme Power Conversion

Xtreme Power Conversion A60 Standby Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion M90 Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion XVT?600 Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA Bedienungsanleitung

Xtreme Power Conversion

Xtreme Power Conversion P90 1000VA Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion XPRT-6kVA Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion 20kVA Model Betriebsanleitung

Xtreme Power Conversion

Xtreme Power Conversion 3000 VA P80 Series Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion P91 Bedienungsanleitung

Xtreme Power Conversion

Xtreme Power Conversion XPRT?1000 Betriebsanleitung

Xtreme Power Conversion

Xtreme Power Conversion P91c-1000 Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion XPRT 6/10KVA Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion NXTi 3P-3P Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion P80g Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion 1000VA Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion M90 Bedienungsanleitung

Xtreme Power Conversion

Xtreme Power Conversion M90S Series Bedienungsanleitung

Xtreme Power Conversion

Xtreme Power Conversion S70 Line?Interactive Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion M90S Series Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion M90U Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion P91g Series Leitfaden

Xtreme Power Conversion

Xtreme Power Conversion XST?400 Bedienungsanleitung

Xtreme Power Conversion

Xtreme Power Conversion E90 Series Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung