Wearing the BH-1
1. Open the earhook.
2. Loop the earhook over your ear.
3. Press the BH-1 to your ear.
4. Adjust the flexible boom microphone by bending the boom
towards your mouth.
The BH-1 comes ready to fit the left ear. You may change
the BH-1 to fit the right ear in the following procedure.
1. The Earhook is removed by pushing it out with a pointed
object.
2. Removed Earhook is inserted from the other side.
For more comfort when wearing the BH-1, affix the sup-
plied sponge on the speaker and insert the supplied sponge
ball into the earhook, and adjust as necessary.
Operation
TT
TT
Transmissionransmission
ransmissionransmission
ransmission
Press the PTT switch to transmit, and release the switch
to return to receive (Depends on transceiver settings).
Adjusting the VAdjusting the V
Adjusting the VAdjusting the V
Adjusting the Volume levelolume level
olume levelolume level
olume level
Adjust the receiver audio level, using the VOLUME (–)
or (+) switch.
VOLUME (+): Adjusts the receiver audio level upward.
VOLUME (–): Adjusts the receiver audio level downward.
Battery
When the battery voltage becomes low, the BH-1’s LED in-
dicator will blink red/blue alternately, the beeper sounds a
low pitch tone, and a “”icon will appear on the display of
the transceiver.
If the battery has never been used, or its charge is depleted,
it may be charged by connecting to the CAB-2 Charger
Sleeve, as shown in the illustration.
1. Attach the CAB-2 to the transceiver.
Please refer to the transceiver’s manual for installation of
CAB-2.
2. Insert the BH-1 into the CAB-2.
NoteNote
NoteNote
Note
: The BH-1 is automatically turned off when it is
inserted into the CAB-2 charger.
3. If the BH-1 is inserted correctly, the LED indicator will
glow Red. A fully discharged battery will be charged com-
pletely in 3 hours. When charging is finished, the LED
indicator will glow blue.
VOLUME (+) Switch
VOLUME (–) Switch
PTT Switch
Battery saverBattery saver
Battery saverBattery saver
Battery saver
If there has been no signal or key activity for 20 seconds,
the Battery Save automatically puts the BH-1 to “sleep”, to
conserve battery life.
When a signal is received or the PTT key is pressed the
BH-1 will be active again.
Refer to the Transceiver Manual for Battery saver instruc-
tions.
Specifications
Bluetooth specification Ver1.2
Bluetooth profiles A2DP, HSP
Radio Frequency 2403 MHz - 2480 MHz
Modulation method GFSK
Transmitter output power 0 dBm Class 2
Receiver sensitivity <-80 dBm
Distance (open area) 32 ft (10 meters)
Audio format SBC
Audio frequency range 100 Hz - 20 kHz
Power supply Rechargeable Lithium-Polymer
Battery life 3 hours
Button/Switch Power On/Off, Volume Up/Down, PTT
LED indicators Power on: Flash blue twice
Unlink: Flash red
Link: Flash blue
Pairing: Red and Blue blinking
Battery low: Flash red and blue
Power off: Flash red 3 times
Operating temperature 32 °F to 104 °F (0 °C to 40 °C)
Operating humidity 5 - 90 %
Certification FCC, CE, BQB
Replacement Parts
Ear hook S8002323
Ear hook sponge S8002325
Speaker sponge S8002324
Wind Screen S8002322
CAB-2 Screw U23316027
