Yale Conexis Bedienungsanleitung

Installing the Yale Access Module – Conexis

Installing the Module

Step 1. Remove battery cover

Using a Phillips-head screwdriver, loosen the battery cover screw. Slide the cover away from the lock.

Step 2. Remove a battery

Remove the batteries from your lock to power it off. Wait approximately 10 seconds for the lock to fully

power down.

Step 3. Remove the Module Cover

Slide the module cover up to remove this and access the slot

Step 4. Install the Module

Insert the Yale Access module into the slot in the module compartment. Make sure it is

properly seated in the lock.

Step 5. Replacing the battery cover

Restore power to the lock by reinserting the batteries. The light on the front of the lock will flash

blue and play a fanfare noise, once this has happened please proceed.

Step 6. Registering the Module & replacing the cover

Follow the below steps to register the Yale Access module with your lock.

Installing Yale Access Application

Before you get started, download the Yale Access App from either the Apple Store or Google Play

depending on whether you use an iOS or Android phone:

Yale Access devices come with a QR code that can be used to set up the device in the Yale Access App. This

code is included on the Yale Access Module and is helpful during setup. If you no longer have a QR code

associated with the device, the serial number can be used during setup.

1. Open the Yale Access App

2. Select the menu in the top-left corner

3. Select Set up a Device to access the QR code scanner

4. Scan the code. If you are unable to scan it, select Can’t Scan the Code to set up with the Serial

Number, which is the 10-digit number located on the sticker inside the battery cover.

5. Follow in-app instructions to complete setup steps

Step 7. Set up the Yale Connect Wi-Fi Bridge

Visit below article for step-by-step instructions to set up the Yale Connect Wi-Fi bridge with your lock.

Setting Up Yale Connect Wi-Fi Bridge

Yale Connect Wi-Fi Bridge serves as a Wi-Fi bridge between our Servers and your Smart Lock

so you can lock and unlock your Smart Lock remotely, right from your phone. With Yale

Connect Wi-Fi Bridge, you can instantly let visitors into your home when you're not there.

Requirements

•Make sure your device has Wi-Fi turned on (Settings > Wi-Fi)

•Make sure your phone is connected to your home Wi-Fi network (Yale Connect Wi-Fi Bridge is

compatible with 2.4 gHZ Wi-Fi)

•The Yale Connect Wi-Fi Bridge requires an active Yale Smart Lock and needs to be installed using

a compatible phone. Please visit our phone compatibility page to ensure that your phone is

compatible.

To install your Yale Connect Wi-Fi Bridge:

For optimal performance and reliability, plug Yale Connect Wi-Fi Bridge into a power socket

that is within 15 feet on an opposite or adjacent wall from your Yale Smart Lock.

1. Wait for the flashing green light on your Yale Connect Wi-Fi Bridge. If you don’t see the flashing

green light press and hold the button on your Yale Connect Wi-Fi Bridge for 5 seconds.

2. In the Yale Access App, go to the side menu (upper left), tap Set Up New Device.

3. Choose Set Up a Connect Bridge.

4. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge.

5. When prompted, plug connect Bridge into a socket near your door and then follow the in-app

instructions.

The accessory setup interface will ask you to choose your home Wi-Fi network. Once your Yale

Connect Wi-Fi Bridge has successfully joined your home Wi-Fi network, the Yale Access App

will check the signal levels of your Wi-Fi and bluetooth connections. If your signal levels are

good, you’re almost finished. If your signal levels are low, you will be guided through adjusting

the location of your Yale Connect Wi-Fi Bridget to improve its connection.

If you experience issues joining your Yale Connect Wi-Fi Bridge with your Wi-Fi network, this

article provides troubleshooting steps.

Yale Connect Wi-Fi Bridge displays its current status through different LED indicator lights on

the front of the device. This article helps you determine what the LED indicators on Yale

Connect Wi-Fi Bridge mean as well as any troubleshooting steps you can take to improve

functionality.

Inhaltsverzeichnis

Andere Yale Steuereinheit Handbücher

Yale

Yale MD-05 Bedienungsanleitung

Yale

Yale Z-Wave Plus v2 Bedienungsanleitung

Yale

Yale Real Living YRMZB2 Technische Daten

Yale

Yale Z-Wave Plus YRMZW2-US Bedienungsanleitung

Yale

Yale SLE 3 Bedienungsanleitung

Yale

Yale Real Living ZigBee Module Technische Daten

Yale

Yale iM1 Bedienungsanleitung

Yale

Yale SECURE CONNECT iM1 Technische Daten

Yale

Yale real Living iM1 Technische Daten

Yale

Yale Z-Wave Plus Bedienungsanleitung

Yale

Yale Real Living iM1 Technische Daten

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung