Yamaha Waverunner VXS VX1800 Bedienungsanleitung

SERVICE MANUAL

WaveRunner

VXS

VX1800 (F2W)

VXR

VX1800A (F2W)

F2W-28197-ZU-11

Preface

This manual has been prepared by Yamaha primarily for use by Yamaha dealers and their trained me-

chanics when performing maintenance procedures and repairs to Yamaha equipment. It has been writ-

ten to suit the needs of persons who have the Bronze Technical Certificate of the YTA (Yamaha

Technical Academy) marine or the equivalent basic understanding of the mechanical and electrical

concepts and procedures inherent in the work, for without such knowledge attempted repairs or service

to the equipment could render it unsafe or unfit for use.

Because Yamaha has a policy of continuously improving its products, models may differ in detail from

the descriptions and illustrations given in this publication. Use only the latest edition of this manual. Au-

thorized Yamaha dealers are notified periodically of modifications and significant changes in specifica-

tions and procedures, and these are incorporated in successive editions of this manual. Also, up-to-

date parts information is available on YPEC-web. Additional information and up-to-date information on

Yamaha products and services are available on Yamaha Service Portal.

Important information

Particularly important information is distinguished in this manual by the following notations:

The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

A WARNING indicates a hazardous situation which, if not avoided, could result in death or se-

rious injury.

A NOTICE indicates special precautions that must be taken to avoid damage to the watercraft

or other property.

TIP:

A TIP provides key information to make procedures easier or clearer.

WaveRunner

VXS, VXR

SERVICE MANUAL

1st Edition, March 2015

Any reprinting or unauthorized use

without the written permission of

Yamaha Motor Co., Ltd.

is expressly prohibited.

Contents

General information 1

Specification 2

Maintenance 3

Fuel system 4

Power unit 5

Jet pump unit 6

Electrical system 7

Hull and hood 8

Troubleshooting 9

Appendix A

General information

Safety while working.......................................................... 1-1

Rotating parts ............................................................................. 1-1

Hot parts..................................................................................... 1-1

Electric shock ............................................................................. 1-1

Impeller....................................................................................... 1-1

Handling of gasoline................................................................... 1-1

Ventilation................................................................................... 1-1

Self-protection ............................................................................ 1-1

Working with crane..................................................................... 1-2

Handling of heat gun .................................................................. 1-2

Parts, lubricants, and sealants ................................................... 1-2

Handling of sealants................................................................... 1-3

Special service tool .................................................................... 1-3

Tightening torque ....................................................................... 1-3

Non-reusable parts..................................................................... 1-3

Disassembly and assembly........................................................ 1-3

Identification number......................................................... 1-4

Primary I.D. number ................................................................... 1-4

Engine serial number ................................................................. 1-4

Jet pump unit serial number ....................................................... 1-4

Craft identification number (C.I.N.) (Europe).............................. 1-4

Hull identification number (H.I.N.) (Oceania).............................. 1-4

How to use this manual ..................................................... 1-5

Manual format ............................................................................ 1-5

Conditions when testing and adjusting....................................... 1-6

Abbreviation ............................................................................... 1-6

Adhesive, lubricant, sealant,

and thread locking agent................................................... 1-8

Symbols...................................................................................... 1-8

Special service tool............................................................ 1-9

Model feature.................................................................... 1-19

General feature ........................................................................ 1-19

Model equipment comparison table ......................................... 1-20

Technical tips ................................................................... 1-21

Engine control .......................................................................... 1-21

General information

RiDE system............................................................................. 1-23

RiDE motor............................................................................... 1-24

ETV system .............................................................................. 1-25

Shift control .............................................................................. 1-26

Engine control system .............................................................. 1-28

Deck and hull............................................................................ 1-31

Lubrication system ................................................................... 1-32

Hose routing ............................................................................. 1-33

Cooling water flow .................................................................... 1-34

Safety while working

1-1

Safety while working

To prevent an accident or injury and to provide

quality service, observe the following safety

procedures.

Rotating parts

Hands, feet, hair, jewelry, clothing, personal

flotation device straps, and so on, can become

entangled with internal rotating parts of the en-

gine or jet pump unit, resulting in serious injury

or death.

• Keep hands, feet, hair, jewelry, clothing, per-

sonal flotation device straps, and so on,

away from any exposed moving parts when

operating the engine with the seat removed.

• Keep away from intake grate while engine is

on.

Hot parts

During and after operation, engine parts are

hot enough to cause burns. Do not touch any

parts in the engine compartment until the en-

gine has cooled.

Electric shock

Do not touch any electrical parts while starting

or operating the engine. Otherwise, shock or

electrocution could result.

Impeller

Do not hold the impeller with your hands when

loosening or tightening the impeller.

Handling of gasoline

• Gasoline is highly flammable. Keep gasoline

and all flammable products away from heat,

sparks, and open flames.

• Gasoline is poisonous and can cause injury

or death. Handle gasoline with care. Never

siphon gasoline by mouth. If you swallow

some gasoline, inhale a lot of gasoline vapor,

or get some gasoline in your eyes, see your

doctor immediately. If gasoline spills on your

skin, wash with soap and water. If gasoline

spills on your clothing, change your clothes.

Ventilation

• Gasoline vapor and exhaust gas are heavier

than air and extremely poisonous. If gasoline

vapor or exhaust gas is inhaled in large

quantities, it may cause loss of conscious-

ness and death within a short time.

• When test running an engine indoors (for ex-

ample, in a water tank) make sure to do so

where adequate ventilation can be main-

tained.

Self-protection

• Protect your eyes by wearing safety glasses

or safety goggles during all operations involv-

ing drilling and grinding, or when using an air

compressor.

1-2

Safety while working

• Protect your hands and feet by wearing pro-

tective gloves and safety shoes when neces-

sary.

Working with crane

• When moving the watercraft, or when lifting

the engine during removal or installation,

make sure to use a crane with a lifting capac-

ity that is equal to or more than the weight of

the watercraft or engine respectively.

• When lifting the watercraft, use the watercraft

lift harness and make sure that the watercraft

is in a stable position when moving it.

• Use the wire ropes of adequate strength, and

lift up the engine unit using the three point

suspension.

• If the engine unit does not have three or more

points to be suspended, support it using ad-

ditional ropes or the like so that the engine

unit can be lifted and carried in a stable man-

ner.

Handling of heat gun

• Improper handling of a heat gun may result in

burns. For information on the proper handling

of the heat gun, see the operation manual is-

sued by the manufacturer.

• When using a heat gun, keep it away from

the gasoline and oil, to prevent a fire.

• Components become hot enough to cause

burns. Do not touch any hot components di-

rectly.

Parts, lubricants, and sealants

Use only genuine Yamaha parts, lubricants,

and sealants, or those recommended by Ya-

maha, when servicing or repairing the water-

craft.

Safety while working

1-3

Handling of sealants

• Wear protective gloves to protect your skin,

when using the sealants.

• See the material safety data sheet issued by

the manufacturer. Some of the sealants may

be harmful to human health.

Special service tool

Use the recommended special service tools to

work safely, and to protect parts from damage.

Tightening torque

Follow the tightening torque specifications pro-

vided throughout the manual. When tightening

nuts, bolts, and screws, tighten the large sizes

first, and tighten fasteners starting in the center

and moving outward.

Non-reusable parts

Always use new gaskets, seals, O-rings, cotter

pins, and so on, when installing or assembling

parts.

Disassembly and assembly

• Use compressed air to remove dust and dirt

during disassembly.

• Apply engine oil to the contact surfaces of

moving parts before assembly.

• Install bearings so that the bearing identifica-

tion mark is facing in the direction indicated in

the installation procedure. In addition, make

sure to lubricate the bearings liberally.

• Apply a thin coat of water resistant grease to

the lip and periphery of an oil seal before in-

stallation.

• Check that moving parts operate normally af-

ter assembly.

1-4

Identification number

Primary I.D. number

The primary I.D. number is stamped on a label

attached to the inside of the engine compart-

ment.

Engine serial number

The engine serial number is stamped on a la-

bel attached to the engine unit.

Jet pump unit serial number

The jet pump unit serial number is stamped on

a label attached to the intermediate housing.

Craft identification number (C.I.N.)

(Europe)

The C.I.N. is stamped on a plate attached to

the boarding platform.

Hull identification number (H.I.N.)

(Oceania)

The H.I.N. is stamped on a plate attached to

the boarding platform.

1. Model name

2. Hull type

3. Primary I.D. number

Starting primary I.D. number

F2W: 800101

1. Engine name

2. Engine type

3. Engine serial number

Starting engine serial number

6EW: 1000001

MODEL

F2W

PRI-I.D.

YAMAHA MOTOR CO., LTD.

ASSEMBLED IN U.S.A. FROM AMERICAN AND JAPANESE

COMPONENTS.

ASSEMBLÉ AUX ÉTATS-UNIS DE PIÈCES AMÉRICAINES ET

JAPONAISES.

321

1. Jet pump unit name

2. Jet pump unit type

3. Jet pump unit serial number

How to use this manual

1-5

How to use this manual

Manual format

The format of this manual has been designed to make service procedures clear and easy to under-

stand. Use the information below as a guide for effective and quality service.

• Parts are shown and detailed in an exploded diagram and are listed in the component list (see “1” in

the following figure for an example page).

• The component list consists of part names and quantities, as well as bolt and screw dimensions (see

“2” in the following figure).

• Symbols are used to indicate important aspects of a procedure, such as the grade of lubricant and

the lubrication point (see “3” in the following figure).

• Tightening torque specifications are provided in the exploded diagrams (see “4” in the following fig-

ure), and in the related detailed instructions. Some torque specifications are listed in stages as torque

figures or angles in degrees.

• Separate procedures and illustrations are used to explain the details of removal, checking, and instal-

lation where necessary (see “5” in the following figure for an example page).

TIP:

For troubleshooting procedures, see Chapter 9, “Troubleshooting”.

6-12

Impeller housingand impeller duct ASSY

No. Part name Q’ty Remarks

1Clamp 1

2Spouthose 1

3Bolt 4 M10

125 mm

4Bracket 1

5Nozzle 1

6 Impeller housing 1

7 Dowel pin 4

8Bolt 4 M6

35 mm

9 Water inlet cover 1

10 Gasket 2 Not reusable

11 Water inlet strainer 1

12 Impeller duct ASSY 1

7 Nm (0.7 kgf·m, 5.2 ft·lb)

40 Nm (4.0 kgf·m, 29.5 ft·lb)

1 Nm (0.1 kgf·m, 0.7 ft·lb)

6-14

Impeller, drive shaft, and impeller duct

Impeller duct ASSY disassembly

1. Remove the impeller “1”.

2. Remove the cap “1”, O-ring “2”, and nut

“3”.

3. Remove the drive shaft “1”.

Do not press the drive shaft threads

directly.

4. Remove the ball bearing “1”.

5. Remove the oil seals “1” and “2”.

Drive shaft holder 6 “2”

90890-06520

Driveshaft holder “2”

YB-06201

Drive shaft holder 6 “4”

90890-06520

Driveshaft holder “4”

YB-06201

A. Worldwide

B. U.S.A. and Canada

Stopper guide plate “2”

90890-06501

Bearing puller assembly “3”

90890-06535

Stopper guide stand “4”

90890-06538

Slide hammer “5”

YB-06096

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Yamaha Boot Handbücher

Yamaha

Yamaha FX140 Bedienungsanleitung

Yamaha

Yamaha WaveRunner VX Deluxe 2007 Betriebsanleitung

Yamaha

Yamaha WaveRunner GP760W Bedienungsanleitung

Yamaha

Yamaha VX110Sport Bedienungsanleitung

Yamaha

Yamaha WaveRunner VX 700 Bedienungsanleitung

Yamaha

Yamaha XLT1200 WaveRunner 2003 Bedienungsanleitung

Yamaha

Yamaha WaveRunner GP800W Betriebsanleitung

Yamaha

Yamaha AR192 Betriebsanleitung

Yamaha

Yamaha SJ700AU Bedienungsanleitung

Yamaha

Yamaha SHVO Bedienungsanleitung

Yamaha

Yamaha WaveRunner FX SHO Bedienungsanleitung

Yamaha

Yamaha EXCITER Betriebsanleitung

Yamaha

Yamaha LST1200X1999 Bedienungsanleitung

Yamaha

Yamaha GP1300R WaveRunner 2007 Betriebsanleitung

Yamaha

Yamaha GP760 Bedienungsanleitung

Yamaha

Yamaha XR1800Z Bedienungsanleitung

Yamaha

Yamaha VX110 Sport WaveRunner 2006 Betriebsanleitung

Yamaha

Yamaha 212X 2016 Betriebsanleitung

Yamaha

Yamaha WaveRunner GP1300R Bedienungsanleitung

Yamaha

Yamaha SUPER JET SJ650Q 1991 Bedienungsanleitung

Yamaha

Yamaha XL700 WaveRunner 2001 Betriebsanleitung

Yamaha

Yamaha GP800R WaveRunner 2005 Betriebsanleitung

Yamaha

Yamaha 33 1980 Bedienungsanleitung

Yamaha

Yamaha FX High Output WaveRunner 2008 Betriebsanleitung

Beliebte Boot Handbücher anderer Marken

Raymarine

Raymarine ST70 Instrument Bedienungsanleitung

Jeanneau

Jeanneau CAP CAMARAT 8.5 CC Bedienungsanleitung

Tiara Yachts

Tiara Yachts C49 2024 Bedienungsanleitung

J 105 Bedienungsanleitung

Monterey Boats

Monterey Boats Sport Yacht 330 Bedienungsanleitung

PURSUIT

PURSUIT OS 335 Bedienungsanleitung

Boston Whaler

Boston Whaler CONQUEST 345 Bedienungsanleitung

Jeanneau

Jeanneau SUN ODYSSEY 41 DS Bedienungsanleitung

Meridian

Meridian 490 Pilothouse Bedienungsanleitung

Advanced Elements

Advanced Elements AdvancedFrame Expedition AE1009 Bedienungsanleitung

Robo Marine Indonesia

Robo Marine Indonesia GEOMAR Bedienungsanleitung

Swallow Boats

Swallow Boats BayRaider Bedienungsanleitung

Intex

Intex Excursion 5 Set Bedienungsanleitung

X SHORE

X SHORE EELEX 8000 Bedienungsanleitung

ISLAND PACKET

ISLAND PACKET 370 Bedienungsanleitung

Sea Ray

Sea Ray 175 Sport Bedienungsanleitung

Regal

Regal 2300 Bedienungsanleitung

Mercury

Mercury Sport 220/240 Bedienungsanleitung