Yamaha CD-N500 Gebrauchs- und Pflegehandbuch

Firmware Update Procedure for CD-N500

IMPORTANT NOTICE

Follow the instructions carefully and do not attempt any other procedures not specified in the

instructions provided by Yamaha.

Improperly updated products may cause improper operation, and any parts or service required to

restore proper operation will not be covered under the Yamaha Limited Warranty.

Choose from the following 2 methods to update to the latest firmware.

Click here for Firmware Update Through the Internet

(Connection to the Internet is required)

Click here for Firmware Update by USB

(A USB thumb drive is required)

In case of error, see the Troubleshooting section

[ 1. Firmware Update Through the Internet ]

Requirements:

Your network player is connected to the Internet if you can receive

Internet radio stations. (See ownerʼs manual for details)

STEP 1 Power on and enter SETUP mode

Press SETUP button on the remote control.

STEP 2 Start Update

Using the UP/DOWN buttons, select menu “7 Firmware Update”

and press ENTER button. After that, select “Network” using

LEFT/RIGHT buttons and press Enter button.

When “Press ENTER to start” is displayed, press Enter button again

for starting update.

ENTER

SETUP

LEFT RIGHT

DOWN

Firmware Update Procedure for CD-N500

note:

DO NOT interrupt the power or press any buttons during the update.

In case the power is accidentally cut off, the network player will restore original

firmware. Perform the update procedure from STEP 1 again.

Update is completed when “UPDATE SUCCESS”, “PLEASE…”, “POWER OFF!” is

displayed alternately. Then, power off.

STEP 3 Confirm updated firmware version

Power on and press the SETUP button on the remote control and select

“6 Firmware Version” using the UP/DOWN buttons. Confirm that the firmware

version has been updated.

Congratulations!

You have completed the firmware update. Your player is ready for normal use.

[ 2. Firmware Update by USB ]

Requirements:

・USB thumb drive, with enough free space to store the firmware.

（File system with FAT16 or FAT32 format）

・Firmware file provided by Yamaha.

STEP 1 Copy the update file to a USB thumb drive

Unzip the downloaded file and copy to the root directory of a

USB thumb drive. Be sure to delete all other files in a USB thumb.

STEP 2 Insert the USB thumb drive on the front panel

STEP 3 Power on and enter SETUP mode

Press SETUP button on the remote control.

STEP 4 Start Update

Using the UP/DOWN buttons, select menu ”7 Firmware Update”

and press ENTER button. After that, select “USB” using

LEFT/RIGHT buttons and press Enter button.

When “Press ENTER to start” is displayed, press Enter button again

for starting update.

ENTER

SETUP

LEFT RIGHT

DOWN

Firmware Update Procedure for CD-N500

note:

DO NOT interrupt the power or press any buttons during the update.

In case the power is accidentally cut off, the network player will restore original

firmware.Perform the update procedure from STEP 1 again.

Update is completed when “UPDATE SUCCESS”, “PLEASE…”, “POWER OFF!” is

displayed alternately. Then, power off.

STEP 5 Confirm updated firmware version

Power on and press the SETUP button on the remote control and select

“6 Firmware Version” using the UP/DOWN buttons. Confirm that the firmware

version has been updated.

Congratulations!

You have completed the firmware update. Your player is ready for normal use.

[ 3. Troubleshooting ]

In case error message appeared during the update and unable to power on, perform

following update procedure.

STEP 1 Copy the update file to a USB thumb drive

Unzip the downloaded file and copy to the root directory of a USB thumb drive.

Be sure to delete all other files in a USB thumb.

STEP 2 Insert the USB thumb drive on the front panel

In this step, AC power cable needs to be disconnected and power switch on the

front panel is set to STANDBY/ON.

STEP 3 Enter firmware update mode

Connect AC power cable to AC outlet, while pressing PURE DIRECT button.

”USB Upgrade” will be shown in the front panel display.

Firmware update will be started automatically.

note:

DO NOT interrupt the power or press any buttons during the update.

In case the power is accidentally cut off, perform the update procedure from STEP

1 again.

Update is completed when “UPDATE SUCCESS”, “PLEASE…”, “POWER OFF!” is

displayed alternately. Then, power off.

Firmware Update Procedure for CD-N500

STEP 4 Confirm updated firmware version

Power on and press the SETUP button on the remote control and select

”6 Firmware Version” using the UP/DOWN buttons. Confirm that the firmware

version has been updated.

Congratulations!

You have completed the firmware update. Your player is ready for normal use.

Andere Handbücher für CD-N500

Inhaltsverzeichnis

Andere Yamaha CD-Player Handbücher

Yamaha

Yamaha CDC-697 Bedienungsanleitung

Yamaha

Yamaha CDX-660 Bedienungsanleitung

Yamaha

Yamaha CDX-390 Bedienungsanleitung

Yamaha

Yamaha CDX-750 Bedienungsanleitung

Yamaha

Yamaha CD-NT670 Bedienungsanleitung

Yamaha

Yamaha CDC-610U Bedienungsanleitung

Yamaha

Yamaha CDX-450 Bedienungsanleitung

Yamaha

Yamaha CDX-396 Bedienungsanleitung

Yamaha

Yamaha CD-N301 Bedienungsanleitung

Yamaha

Yamaha CDC-585 Bedienungsanleitung

Yamaha

Yamaha CDX-420 Bedienungsanleitung

Yamaha

Yamaha DVD-C920 Bedienungsanleitung

Yamaha

Yamaha CDV-870 Bedienungsanleitung

Yamaha

Yamaha DVD-S700 Bedienungsanleitung

Yamaha

Yamaha CDS1000 - SACD Player Bedienungsanleitung

Yamaha

Yamaha CDX-97 Bedienungsanleitung

Yamaha

Yamaha CD S2000 - SACD Player Bedienungsanleitung

Yamaha

Yamaha CD-S2100 Bedienungsanleitung

Yamaha

Yamaha CD-S3000 Bedienungsanleitung

Yamaha

Yamaha CDX-E410 Bedienungsanleitung

Yamaha

Yamaha CDX-520 Bedienungsanleitung

Yamaha

Yamaha DVD-C961 Bedienungsanleitung

Yamaha

Yamaha EM-202VCD Bedienungsanleitung

Yamaha

Yamaha CDC-95 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung

Rotel

Rotel RCD 975 Bedienungsanleitung