Yamaha DTX-PRO Montageanleitung

DTX-PRO Firmware Update Guide 1

DTX-PRO

Firmware Update Guide

Thank you for choosing a Yamaha product.

This document explains how to update the firmware of the DTX-PRO and the revision history.

NOTICE

•

Please save your important data onto a USB flash drive before updating the firmware of the DTX-PRO.

•

This updater is to be used at the user’s own risk.

•

DO NOT power off or disconnect the cable from the DTX-PRO during the updating process. Doing so

may damage the DTX-PRO.

•

DO NOT remove the USB flash drive from the DTX-PRO during the updating process. The DTX-PRO

and the USB flash drive may become inoperable.

•

If the update failed, and the DTX-PRO no longer operates, run the update program again. If doing so

does not solve the problem, please contact your Yamaha dealer.

•

This firmware and documentation are the exclusive copyrights of Yamaha Corporation.

•

Reproducing or modifying all or parts of this firmware or its documentation without permission is

strictly prohibited.

•

The company names and product names in this document are the trademarks or registered trademarks

of their respective companies.

DTX-PRO Firmware Update Guide 2

Included files

The .zip file contains the following files:

• DTX-PRO_en_update_guide_v***.pdf This document (PDF file)

• DTX-PRO_SETUP.PRG The update program

Required items

• USB flash drive formatted on the DTX-PRO

Please check the URL below for a list of supported USB flash drives.

https://download.yamaha.com

After selecting your country and clicking on “Documents and Data” from the “Support” page, enter the

model name into the search box.

Checking the current version

Check the version from MENU/Version.

Updating procedure

NOTICE

Please save your important data onto the USB flash drive before updating the firmware of the DTX-PRO.

1. After downloading, decompress the archived file, and then find the "***.PRG"

file. Copy the "***.PRG" file to the root of the USB flash drive.

DTX-PRO Firmware Update Guide 3

2. Make sure to turn the power off, and then connect the USB flash drive to the

[USB TO DEVICE] terminal on the rear panel.

3. Hold down the [START/STOP] button and press the Standby/On switch to turn

the power on.

After a few seconds, the following message will appear.

4. Press the [MENU] button.

The following message will appear.

5. Press the [MENU] button again to start the update process.

The process may take a few minutes.

When the update process is complete, the following message will appear.

6. Turn the power off.

This completes the update process.

Installer

[MENU]：Install

[EXIT]：Delete

Press the button

Yamaha Corp.

Installer

[MENU]：Execute

[EXIT]：Cancel

Program ver.*.**

Yamaha Corp.

Installer

Completed.

Turn power off.

Program ver.*.**

Yamaha Corp.

DTX-PRO Firmware Update Guide 4

Manual Development Group

Published 11/2020

YJ-A0

Troubleshooting

The power was turned off or the USB flash drive was removed before the installation

process could be completed.

You need to reinstall the program. Go back to the beginning of the procedure

and try installing again.

An error message appears, and you cannot install the firmware.

Please check that:

・The USB flash drive is inserted correctly.

・There is no dust or dirt on the USB terminal.

・The installation program file is saved at the root of the USB flash drive.

・The data in the USB flash drive or the USB flash drive itself is not corrupted.

・You have the correct file for your drum module.

・The same problem does not occur with a different USB flash drive.

Main enhancements

v1.00 ➜v1.01

・Added the DTX502 series drum kits to the Trigger Setup Wizard.

・Fine-adjusted the MENU/Trigger/Crosstalk settings. Since the settings are

slightly different from those of version 1.00, readjust the crosstalk settings

if necessary.

・Added -6dB, -12dB, and 18dB to the MENU/Utility/Output Gain settings.

・Added PA-HP to the MENU/Utility/Input Output/AUX In/Input Mode settings.

・Added AUX In Gain to the MENU/Utility/Input Output settings.

・Changed setting ranges for some parameters.

・Updated the displays on some screens.

・Fixed minor problems.

Andere Handbücher für DTX-PRO

Inhaltsverzeichnis

Andere Yamaha Trommel Handbücher

Yamaha

Yamaha DTXTREME IIs Bedienungsanleitung

Yamaha

Yamaha DTXPRESS Bedienungsanleitung

Yamaha

Yamaha DTXPLORER Bedienungsanleitung

Yamaha

Yamaha Druid Pro DD-55 Bedienungsanleitung

Yamaha

Yamaha EMR-1 Bedienungsanleitung

Yamaha

Yamaha DD-11 Bedienungsanleitung

Yamaha

Yamaha DD-5 Bedienungsanleitung

Yamaha

Yamaha DTX6 Bedienungsanleitung

Yamaha

Yamaha DTX-PRO Bedienungsanleitung

Yamaha

Yamaha KP120 Bedienungsanleitung

Yamaha

Yamaha DTP4KSP Bedienungsanleitung

Yamaha

Yamaha DTX700 Bedienungsanleitung

Yamaha

Yamaha DTX Bedienungsanleitung

Yamaha

Yamaha DTXPRESS IV Bedienungsanleitung

Yamaha

Yamaha DD-7 Bedienungsanleitung

Yamaha

Yamaha DTXPRESS IV Bedienungsanleitung

Yamaha

Yamaha DD-65 Bedienungsanleitung

Yamaha

Yamaha RS-80 Installationsanleitung

Yamaha

Yamaha RY30 Bedienungsanleitung

Yamaha

Yamaha PCY135 Bedienungsanleitung

Yamaha

Yamaha DTXPRESS II Bedienungsanleitung

Yamaha

Yamaha RS-100 Installationsanleitung

Yamaha

Yamaha EMR-1 Bedienungsanleitung

Yamaha

Yamaha DTX700 Montageanleitung

Beliebte Trommel Handbücher anderer Marken

Roland

Roland TD-9K Bedienungsanleitung

Sudoku

Sudoku LEXUS Bedienungsanleitung

Roland

Roland CR-80 Bedienungsanleitung

V-Drums

V-Drums V-Tour TD-9KX2 Bedienungsanleitung

Cherub

Cherub WRW-206 Bedienungsanleitung

Opti-Med

Opti-Med JM-D1 Series Bedienungsanleitung

Roland

Roland CR-80 Bedienungsanleitung

Roland

Roland RM-2 Bedienungsanleitung

ATV

ATV aD5 Bedienungsanleitung

Alesis

Alesis DM Pro Kit Bedienungsanleitung

Roland

Roland TR-808 Bedienungsanleitung

Roland

Roland SPD-20 Bedienungs- und Wartungshandbuch

Koma Elektronik

Koma Elektronik RH 301 Bedienungsanleitung

Roland

Roland TR-8 Bedienungsanleitung

Casio

Casio RZ-1 Bedienungsanleitung

Ashton

Ashton RHYTHMUVX Bedienungsanleitung

Earthworks

Earthworks DrumKit DK7 Bedienungsanleitung

Pintech

Pintech E-Gig Installationsanleitung