Yamaha Clavinova CVP-509 Kurzanleitung

Version 1.10 Upgrade Manual

Version 1.10 of the Clavinova ﬁrmware adds the following functionality to CVP-501, CVP-503, CVP-505, and

CVP-509 models.

•Support for the Wi-Fi Protected Access (WPA) wireless encryption standard (with the exception of certain

USB-LAN adaptors*1)

•

Support for the Wi-Fi Protected Setup (WPS)

standard, which makes it easier to setup wireless home

networks

(with the exception of certain USB-LAN adaptors*1)

• Support for the following USB-LAN adaptors.

Wireless: Buffalo WLI-UC-GN Buffalo WLI-UC-GNHP Planex GW-USMicroN Planex GW-USMini2N

Edimax EW-7711UAn Edimax EW-7711UTn Hawking HWUN3 Tenda W311U

Belkin F6D4050 LogiLink WL0049A LogiLink WL0054

Wired: LINKSYS USB300M AIRLINK101 ASOHOUSB 10/100Mbps Fast Ethernet USB 2.0 Adapter

macally AIR2NET INTELLINET Hi-Speed USB 2.0 to Fast Ethernet Adapter

*1: For more details, please visit the Yamaha Piano / Keyboard website (below) and refer to the list of USB devices conﬁrmed as

working with our products. http://music.yamaha.com/download

*2: For more details, please refer to the Internet Connection Guide, which can be downloaded from the Yamaha Manual Library

website. http://www.yamaha.co.jp/manual/english/

1. Turn on the Clavinova.

This can be done by pressing the Power switch located at

the right of the front panel.

2. Conﬁrm the instrument’s current ﬁrmware

version as follows.

2-1 Press the [FUNCTION] button.

2-2 Press the [J] (UTILITY) button.

2-3 Using the TAB [E] / [F] buttons, select the OWNER tab

and display the Owner setting screen.

2-4 Press the [7▲] (VERSION) button to display the current

ﬁrmware version. If the displayed version number is less

than 1.10, the ﬁrmware should be upgraded.

2-5 Press the [8▲] (EXIT) button or the [EXIT] button to close

the window.

3. Turn off the Clavinova.

This can be done by pressing the Power switch located at

the right of the front panel.

To upgrade the Clavinova ﬁrmware, place the upgrade data on a

USB ﬂash memory device and then carry out the upgrading

procedure as described below.

1. Plug the USB ﬂash memory device containing

the upgrade data into the Clavinova.

2. Hold down the [START/STOP] button and press

the Power switch

Continue to hold down the [START/STOP] button until the

following message is displayed.

3. Install the upgrade data.

To do so, release the [START/STOP] button and then press

it once again.

Conﬁrming the Current Version

Upgrading the Firmware

CVP-509/505/503/501

After indicating that data is being loaded, the Clavinova will

begin to install the new version of the ﬁrmware. The following

message is displayed at this time. Upgrading of the ﬁrmware

takes approximately 5 minutes.

The USB ﬂash memory device must not be unplugged and the

instrument must not be turned off while the ﬁrmware is being

installed. Failure to observe this precaution may render the

Clavinova unﬁt for use.

The following message is displayed upon completion of the

ﬁrmware installation process.

4. Turn off the Clavinova and unplug the USB ﬂash

memory device.

After any ﬁrmware upgrade, it is recommended that you conﬁrm

the current version once again as described below.

1. Turn on the Clavinova.

This can be done by pressing the Power switch located at

the right of the front panel.

2. Conﬁrm the instrument’s current ﬁrmware

version as follows.

2-1 Press the [FUNCTION] button.

2-2 Press the [J] (UTILITY) button.

2-3 Using the TAB [E] / [F] buttons, select the OWNER tab

and display the Owner setting screen.

2-4 Press the [7▲] (VERSION) button to display the current

ﬁrmware version.

If the upgrade process has been completed successfully,

version 1.10 will be shown in the window displayed. If the

version has not changed, it is likely that the installation

procedure was not completed successfully. In such a

case, repeat the procedure carefully as described herein.

3. Press the [8▲] (EXIT) button or the [EXIT] button

to close the window.

Deletion using the instrument:

Version 1.10 of the ﬁrmware for Clavinova CVP-501, CVP-503,

CVP-505, and CVP-509 models makes it possible to delete

upgrade data from a USB ﬂash memory device using the

instrument itself. To do so, proceed as follows.

1. Plug the USB ﬂash memory device containing

the upgrade data into the Clavinova.

2. Hold down the [START/STOP] button and press

the Power switch.

Continue to hold down the [START/STOP] button until the

following message is displayed.

The USB ﬂash memory device must not be unplugged and the

instrument must not be turned off at this time. Failure to observe

this precaution may render the Clavinova unﬁt for use.

3. Press the [BREAK] button to delete the upgrade

data.

The following conﬁrmation message will be displayed.

4. To delete the upgrade data, release the [START/

STOP] button and then press it once again.

The Clavinova will begin deleting the upgrade data. The

following message is displayed at this time.

The USB ﬂash memory device must not be unplugged and the

instrument must not be turned off while the upgrade data is

being deleted. Failure to observe this precaution may result in

the USB ﬂash memory device being permanently damaged.

The following message is displayed upon completion of the

data deletion process.

5. Turn off the Clavinova and unplug the USB ﬂash

memory device.

This can be done by pressing the Power switch located at

the right of the front panel.

Reconﬁrming the Current Version

Deleting Upgrade Data

Dieses Handbuch passt für folgende Modelle

Andere Yamaha Elektronische Tastatur Handbücher

Yamaha

Yamaha PortaSound PSS-101 Bedienungsanleitung

Yamaha

Yamaha PortaSound PSS-795 Bedienungsanleitung

Yamaha

Yamaha PortaSound PSS-140 Bedienungsanleitung

Yamaha

Yamaha PortaSound pss-170 Bedienungsanleitung

Yamaha

Yamaha Clavinova CLP-370 Bedienungsanleitung

Yamaha

Yamaha PortaSound PSS-260 Bedienungsanleitung

Yamaha

Yamaha PortaSound PS-200 Bedienungsanleitung

Yamaha

Yamaha Portatone PSR-1500 Bedienungsanleitung

Yamaha

Yamaha PortaSound PC-50 Bedienungsanleitung

Yamaha

Yamaha F01 Benutzerhandbuch

Yamaha

Yamaha Disklavier Silent MPX70 Bedienungsanleitung

Yamaha

Yamaha PortaSound PSS-595 Bedienungsanleitung

Yamaha

Yamaha Portatone PSR-410 Bedienungsanleitung

Yamaha

Yamaha SHS-10 Bedienungsanleitung

Yamaha

Yamaha PortaSound PSS-795 Bedienungsanleitung

Yamaha

Yamaha Portatone EZ-J14 Bedienungsanleitung

Yamaha

Yamaha PortaTone PSR-110 Bedienungsanleitung

Yamaha

Yamaha genos Bedienungsanleitung

Yamaha

Yamaha Portatone X3500 Bedienungsanleitung

Yamaha

Yamaha Portatone PSR-9000 Bedienungsanleitung

Yamaha

Yamaha PortaSound PSS-26 Bedienungsanleitung

Yamaha

Yamaha Electone B-60 Bedienungsanleitung

Yamaha

Yamaha PortaSound PSS-100 Bedienungsanleitung

Yamaha

Yamaha Clavinova CVP-7 Bedienungsanleitung

Beliebte Elektronische Tastatur Handbücher anderer Marken

Casio

Casio LK-50 Konfigurationshandbuch

Casio

Casio VZ-1 Fehlerbehebungshandbuch

Casio

Casio Privia PX-100 Bedienungsanleitung

Behringer

Behringer U-CONTROL UMX49 Bedienungsanleitung

Casio

Casio WK-1600 Bedienungsanleitung

Keith McMillen Instruments

Keith McMillen Instruments K-Board Pro 4 Technisches Datenblatt

Roland

Roland Juno-6 Bedienungsanleitung

McGrey

McGrey 6170 Bedienungsanleitung

HDC

HDC Kurzweil KP300X Bedienungsanleitung

Casio

Casio Celviano AP-45 Bedienungsanleitung

Akai

Akai MPK88 Bedienungsanleitung

Waldorf

Waldorf IRIDIUM Bedienungsanleitung

Casio

Casio CDP-200R Technisches Dokument

Behringer

Behringer MOTÖR 61 Bedienungsanleitung

Casio

Casio KL-130 Bedienungsanleitung

Casio

Casio AT-5 Bedienungsanleitung

Casio

Casio CTK-631 Bedienungsanleitung

Casio

Casio Privia 7ES1A Bedienungsanleitung